[ 0.000000] Linux version 2.6.26-ovz-smp-alt0.3 (builder@apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt4)) #1 SMP Sat Oct 18 18:58:48 UTC 2008 [ 0.000000] Command line: auto BOOT_IMAGE=2626-ovz-smp-03 ro root=805 panic=30 nolapic noapic acpi=off [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fcf0000 (usable) [ 0.000000] BIOS-e820: 000000003fcf0000 - 000000003fd96000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fd96000 - 000000003fdfd000 (usable) [ 0.000000] BIOS-e820: 000000003fdfd000 - 000000003fe5f000 (reserved) [ 0.000000] BIOS-e820: 000000003fe5f000 - 000000003fe6a000 (usable) [ 0.000000] BIOS-e820: 000000003fe6a000 - 000000003fedf000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fedf000 - 000000003fee7000 (usable) [ 0.000000] BIOS-e820: 000000003fee7000 - 000000003feff000 (ACPI data) [ 0.000000] BIOS-e820: 000000003feff000 - 000000003ff00000 (usable) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 261360) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 261526, 261629) 2 entries of 256 used [ 0.000000] Entering add_active_range(0, 261727, 261738) 3 entries of 256 used [ 0.000000] Entering add_active_range(0, 261855, 261863) 4 entries of 256 used [ 0.000000] Entering add_active_range(0, 261887, 261888) 5 entries of 256 used [ 0.000000] max_pfn_mapped = 1048460 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.5 present. [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 261360) 1 entries of 256 used [ 0.000000] Entering add_active_range(0, 261526, 261629) 2 entries of 256 used [ 0.000000] Entering add_active_range(0, 261727, 261738) 3 entries of 256 used [ 0.000000] Entering add_active_range(0, 261855, 261863) 4 entries of 256 used [ 0.000000] Entering add_active_range(0, 261887, 261888) 5 entries of 256 used [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-6aed77] TEXT DATA BSS [ 0.000000] early res: 3 [e85000-effb3d] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-afff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20000ffffff] PMD -> [ffff810001200000-ffff8100021fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 261360 [ 0.000000] 0: 261526 -> 261629 [ 0.000000] 0: 261727 -> 261738 [ 0.000000] 0: 261855 -> 261863 [ 0.000000] 0: 261887 -> 261888 [ 0.000000] On node 0 totalpages: 261386 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1424 pages reserved [ 0.000000] DMA zone: 2511 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4028 pages used for memmap [ 0.000000] DMA32 zone: 253359 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: INTEL Product ID: S3200SHC <6>MPTABLE: Product ID: S3200SHC <6>MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] I/O APIC #5 Version 32 at 0xFEC00000. [ 0.000000] Setting APIC routing to flat [ 0.000000] Processors: 1 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000003fcf0000 - 000000003fd96000 [ 0.000000] PM: Registered nosave memory: 000000003fdfd000 - 000000003fe5f000 [ 0.000000] PM: Registered nosave memory: 000000003fe6a000 - 000000003fedf000 [ 0.000000] PM: Registered nosave memory: 000000003fee7000 - 000000003feff000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 39216 bytes of per cpu data [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255870 [ 0.000000] Kernel command line: auto BOOT_IMAGE=2626-ovz-smp-03 ro root=805 panic=30 nolapic noapic acpi=off [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PIT [ 0.000000] time.c: Detected 1995.059 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.004000] Checking aperture... [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] Memory: 1021460k/1047552k available (2525k kernel code, 23460k reserved, 1071k data, 292k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.084209] Calibrating delay using timer specific routine.. 3993.49 BogoMIPS (lpj=7986985) [ 0.092275] Mount-cache hash table entries: 256 [ 0.092762] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.092970] CPU: L2 cache: 1024K [ 0.093117] CPU: Physical Processor ID: 0 [ 0.093261] CPU: Processor Core ID: 0 [ 0.093413] CPU0: Thermal monitoring enabled (TM2) [ 0.093561] using mwait in idle threads. [ 0.093714] SMP alternatives: switching to UP code [ 0.101850] Freeing SMP alternatives: 24k freed [ 0.102014] Page beancounter hash is 65536 entries. [ 0.103050] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d [ 0.103330] Using local APIC timer interrupts. [ 0.108006] APIC timer calibration result 12469110 [ 0.108006] Detected 12.469 MHz APIC timer. [ 0.108006] Brought up 1 CPUs [ 0.108006] Total of 1 processors activated (3993.49 BogoMIPS). [ 0.108006] CPU0 attaching sched-domain: [ 0.108006] domain 0: span 0 [ 0.108006] groups: 0 [ 0.108006] net_namespace: 1080 bytes [ 0.108006] NET: Registered protocol family 16 [ 0.108006] PCI: Using configuration type 1 for base access [ 0.108367] ACPI: Interpreter disabled. [ 0.108514] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.108751] pnp: PnP ACPI: disabled [ 0.109570] PCI: Probing PCI hardware [ 0.109716] PCI: Probing PCI hardware (bus 00) [ 0.110631] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.110638] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.110868] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.111703] PCI: Transparent bridge - 0000:00:1e.0 [ 0.114859] PCI: Discovered primary peer bus ff [IRQ] [ 0.115042] PCI: Using IRQ router PIIX/ICH [8086/2916] at 0000:00:1f.0 [ 0.116743] DMAR:parse DMAR table failure. [ 0.116941] PCI-GART: No AMD northbridge found. [ 0.117197] hpet clockevent registered [ 0.117204] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.117645] hpet0: 4 64-bit timers, 14318180 Hz [ 0.118838] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread FFFF81003F8E0000 could not acquire Mutex [1] [20080321] [ 0.120327] PCI: Bridge: 0000:00:1c.0 [ 0.120471] IO window: disabled. [ 0.120616] MEM window: disabled. [ 0.120760] PREFETCH window: disabled. [ 0.120909] PCI: Bridge: 0000:00:1c.4 [ 0.121052] IO window: disabled. [ 0.121196] MEM window: 0x41000000-0x418fffff [ 0.121343] PREFETCH window: 0x0000000040000000-0x0000000040ffffff [ 0.121503] PCI: Bridge: 0000:00:1e.0 [ 0.121646] IO window: 1000-1fff [ 0.121790] MEM window: 0x41900000-0x419fffff [ 0.121938] PREFETCH window: 0x0000000050000000-0x00000000500fffff [ 0.122113] PCI: setting IRQ 11 as level-triggered [ 0.122116] PCI: Found IRQ 11 for device 0000:00:1c.0 [ 0.122297] PCI: Sharing IRQ 11 with 0000:00:1c.4 [ 0.122490] PCI: Sharing IRQ 11 with 0000:02:00.0 [ 0.122641] PCI: Sharing IRQ 11 with 0000:03:00.0 [ 0.122802] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.122822] PCI: Found IRQ 11 for device 0000:00:1c.4 [ 0.122997] PCI: Sharing IRQ 11 with 0000:00:1c.0 [ 0.123194] PCI: Sharing IRQ 11 with 0000:02:00.0 [ 0.123346] PCI: Sharing IRQ 11 with 0000:03:00.0 [ 0.123507] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.123517] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.123531] NET: Registered protocol family 2 [ 0.160081] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.160560] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.161699] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.162431] TCP: Hash tables configured (established 131072 bind 65536) [ 0.162588] TCP reno registered [ 0.172172] NET: Registered protocol family 1 [ 0.172781] checking if image is initramfs... it is [ 0.227905] Freeing initrd memory: 490k freed [ 0.230071] audit: initializing netlink socket (disabled) [ 0.230244] type=2000 audit(1227646761.228:1): initialized [ 0.232787] Total HugeTLB memory allocated, 0 [ 0.243174] VFS: Disk quotas dquot_6.5.1 [ 0.243466] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.245484] msgmni has been set to 1997 [ 0.246055] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.246284] io scheduler noop registered [ 0.246428] io scheduler anticipatory registered [ 0.246575] io scheduler deadline registered [ 0.246945] io scheduler cfq registered (default) [ 0.247457] pci 0000:02:00.0: Boot video device [ 0.247471] pci 0000:03:00.0: Firmware left e100 interrupts enabled; disabling [ 0.247710] pci 0000:03:01.0: Firmware left e100 interrupts enabled; disabling [ 0.248160] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.248189] assign_interrupt_mode Found MSI capability [ 0.248376] Allocate Port Service[0000:00:1c.0:pcie00] [ 0.248473] Allocate Port Service[0000:00:1c.0:pcie02] [ 0.248613] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 0.248642] assign_interrupt_mode Found MSI capability [ 0.248825] Allocate Port Service[0000:00:1c.4:pcie00] [ 0.248934] Allocate Port Service[0000:00:1c.4:pcie02] [ 0.256015] Real Time Clock Driver v1.12ac [ 0.256352] Linux agpgart interface v0.103 [ 0.256500] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 0.256930] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.257260] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.262548] brd: module loaded [ 0.262831] input: Macintosh mouse button emulation as /class/input/input0 [ 0.263326] PNP: No PS/2 controller found. Probing ports directly. [ 0.266427] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.266578] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.276534] mice: PS/2 mouse device common for all mice [ 0.276783] cpuidle: using governor ladder [ 0.276928] cpuidle: using governor menu [ 0.277670] TCP bic registered [ 0.278114] registered taskstats version 1 [ 0.278505] Freeing unused kernel memory: 292k freed [ 0.278748] Write protecting the kernel read-only data: 3328k [ 0.544634] SCSI subsystem initialized [ 0.550650] Driver 'sd' needs updating - please use bus_type methods [ 0.567375] libata version 3.00 loaded. [ 0.571837] ata_piix 0000:00:1f.2: version 2.12 [ 0.571858] PCI: setting IRQ 10 as level-triggered [ 0.571862] PCI: Found IRQ 10 for device 0000:00:1f.2 [ 0.572037] PCI: Sharing IRQ 10 with 0000:00:1a.1 [ 0.572233] PCI: Sharing IRQ 10 with 0000:00:1f.5 [ 0.572401] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.572883] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 0.572945] scsi0 : ata_piix [ 0.573339] scsi1 : ata_piix [ 0.573548] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14 [ 0.573708] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15 [ 0.620007] Switched to high resolution mode on CPU 0 [ 1.048074] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.103485] ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133 [ 1.103485] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.170112] ata1.00: configured for UDMA/133 [ 1.498758] ata2: SATA link down (SStatus 0 SControl 300) [ 1.498971] isa bounce pool size: 16 pages [ 1.499232] scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5 [ 1.499668] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 1.499859] sd 0:0:0:0: [sda] Write Protect is off [ 1.502746] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.502804] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.503143] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 1.503326] sd 0:0:0:0: [sda] Write Protect is off [ 1.503473] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.503529] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.503764] sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > [ 1.540003] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.540003] PCI: Found IRQ 10 for device 0000:00:1f.5 [ 1.540003] PCI: Sharing IRQ 10 with 0000:00:1a.1 [ 1.540003] PCI: Sharing IRQ 10 with 0000:00:1f.2 [ 1.540003] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.540003] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 1.540003] scsi2 : ata_piix [ 1.540003] scsi3 : ata_piix [ 1.540003] ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2464 bmdma 0x2410 irq 10 [ 1.540003] ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2460 bmdma 0x2418 irq 10 [ 1.910787] ata3: SATA link down (SStatus 0 SControl 300) [ 2.240012] ata4: SATA link down (SStatus 0 SControl 300) [ 2.721651] kjournald starting. Commit interval 5 seconds [ 2.721651] EXT3-fs: mounted filesystem with ordered data mode. [ 4.536403] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.698678] usbcore: registered new interface driver usbfs [ 4.698762] usbcore: registered new interface driver hub [ 4.698827] usbcore: registered new device driver usb [ 4.701947] USB Universal Host Controller Interface driver v3.0 [ 4.702072] PCI: setting IRQ 9 as level-triggered [ 4.702077] PCI: Found IRQ 9 for device 0000:00:1a.0 [ 4.702119] PCI: Sharing IRQ 9 with 0000:00:1d.2 [ 4.702139] PCI: Sharing IRQ 9 with 0000:00:1f.3 [ 4.702163] PCI: Sharing IRQ 9 with 0000:03:02.0 [ 4.702177] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 4.702182] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 4.702346] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 4.702379] uhci_hcd 0000:00:1a.0: irq 9, io base 0x000020c0 [ 4.702547] usb usb1: configuration #1 chosen from 1 choice [ 4.702612] hub 1-0:1.0: USB hub found [ 4.702624] hub 1-0:1.0: 2 ports detected [ 4.804282] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.804287] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.804290] usb usb1: Product: UHCI Host Controller [ 4.804293] usb usb1: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 4.804296] usb usb1: SerialNumber: 0000:00:1a.0 [ 4.804342] PCI: Found IRQ 10 for device 0000:00:1a.1 [ 4.804412] PCI: Sharing IRQ 10 with 0000:00:1f.2 [ 4.804425] PCI: Sharing IRQ 10 with 0000:00:1f.5 [ 4.804461] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 4.804465] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 4.804522] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 4.804554] uhci_hcd 0000:00:1a.1: irq 10, io base 0x000020a0 [ 4.804722] usb usb2: configuration #1 chosen from 1 choice [ 4.804784] hub 2-0:1.0: USB hub found [ 4.804797] hub 2-0:1.0: 2 ports detected [ 4.908230] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.908235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.908240] usb usb2: Product: UHCI Host Controller [ 4.908242] usb usb2: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 4.908245] usb usb2: SerialNumber: 0000:00:1a.1 [ 4.908290] PCI: Found IRQ 10 for device 0000:00:1a.2 [ 4.908318] PCI: Sharing IRQ 10 with 0000:00:1a.7 [ 4.908386] PCI: Sharing IRQ 10 with 0000:03:01.0 [ 4.908405] PCI: Setting latency timer of device 0000:00:1a.2 to 64 [ 4.908410] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 4.908467] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 [ 4.908499] uhci_hcd 0000:00:1a.2: irq 10, io base 0x00002080 [ 4.908658] usb usb3: configuration #1 chosen from 1 choice [ 4.908718] hub 3-0:1.0: USB hub found [ 4.908730] hub 3-0:1.0: 2 ports detected [ 4.914126] iTCO_vendor_support: vendor-support=0 [ 4.918598] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) [ 4.918740] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 4.918761] iTCO_wdt: No card detected [ 5.012233] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.012238] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.012242] usb usb3: Product: UHCI Host Controller [ 5.012244] usb usb3: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 5.012247] usb usb3: SerialNumber: 0000:00:1a.2 [ 5.012335] PCI: Found IRQ 10 for device 0000:00:1a.7 [ 5.012356] PCI: Sharing IRQ 10 with 0000:00:1a.2 [ 5.012417] PCI: Sharing IRQ 10 with 0000:03:01.0 [ 5.012440] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 5.012444] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 5.012505] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 [ 5.016408] ehci_hcd 0000:00:1a.7: debug port 1 [ 5.016414] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 5.016429] ehci_hcd 0000:00:1a.7: irq 10, io mem 0x41a21400 [ 5.032014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.032176] usb usb4: configuration #1 chosen from 1 choice [ 5.032244] hub 4-0:1.0: USB hub found [ 5.032257] hub 4-0:1.0: 6 ports detected [ 5.071291] input: PC Speaker as /class/input/input1 [ 5.136244] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.136249] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.136252] usb usb4: Product: EHCI Host Controller [ 5.136255] usb usb4: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 ehci_hcd [ 5.136257] usb usb4: SerialNumber: 0000:00:1a.7 [ 5.136297] PCI: Found IRQ 11 for device 0000:00:1d.0 [ 5.136354] PCI: Sharing IRQ 11 with 0000:00:1d.7 [ 5.136411] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 5.136415] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 5.136478] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 5.136512] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002060 [ 5.136676] usb usb5: configuration #1 chosen from 1 choice [ 5.136744] hub 5-0:1.0: USB hub found [ 5.136758] hub 5-0:1.0: 2 ports detected [ 5.240342] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.240347] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.240351] usb usb5: Product: UHCI Host Controller [ 5.240354] usb usb5: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 5.240356] usb usb5: SerialNumber: 0000:00:1d.0 [ 5.240405] PCI: Found IRQ 11 for device 0000:00:1d.1 [ 5.240513] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 5.240517] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 5.240574] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 5.240604] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002040 [ 5.240765] usb usb6: configuration #1 chosen from 1 choice [ 5.240846] hub 6-0:1.0: USB hub found [ 5.240858] hub 6-0:1.0: 2 ports detected [ 5.344266] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.344271] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.344274] usb usb6: Product: UHCI Host Controller [ 5.344277] usb usb6: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 5.344280] usb usb6: SerialNumber: 0000:00:1d.1 [ 5.344349] PCI: Found IRQ 9 for device 0000:00:1d.2 [ 5.344364] PCI: Sharing IRQ 9 with 0000:00:1a.0 [ 5.344420] PCI: Sharing IRQ 9 with 0000:00:1f.3 [ 5.344446] PCI: Sharing IRQ 9 with 0000:03:02.0 [ 5.344460] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 5.344464] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 5.344522] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 5.344553] uhci_hcd 0000:00:1d.2: irq 9, io base 0x00002020 [ 5.344741] usb usb7: configuration #1 chosen from 1 choice [ 5.344805] hub 7-0:1.0: USB hub found [ 5.344818] hub 7-0:1.0: 2 ports detected [ 5.448220] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.448225] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.448229] usb usb7: Product: UHCI Host Controller [ 5.448231] usb usb7: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 uhci_hcd [ 5.448234] usb usb7: SerialNumber: 0000:00:1d.2 [ 5.448297] PCI: Found IRQ 11 for device 0000:00:1d.7 [ 5.448336] PCI: Sharing IRQ 11 with 0000:00:1d.0 [ 5.448405] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 5.448409] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 5.448467] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 [ 5.452369] ehci_hcd 0000:00:1d.7: debug port 1 [ 5.452375] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 5.452384] ehci_hcd 0000:00:1d.7: irq 11, io mem 0x41a21000 [ 5.468026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 5.468187] usb usb8: configuration #1 chosen from 1 choice [ 5.468251] hub 8-0:1.0: USB hub found [ 5.468264] hub 8-0:1.0: 6 ports detected [ 5.572207] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.572211] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.572215] usb usb8: Product: EHCI Host Controller [ 5.572217] usb usb8: Manufacturer: Linux 2.6.26-ovz-smp-alt0.3 ehci_hcd [ 5.572220] usb usb8: SerialNumber: 0000:00:1d.7 [ 5.573327] PCI: Found IRQ 9 for device 0000:00:1f.3 [ 5.573343] PCI: Sharing IRQ 9 with 0000:00:1a.0 [ 5.573377] PCI: Sharing IRQ 9 with 0000:00:1d.2 [ 5.573419] PCI: Sharing IRQ 9 with 0000:03:02.0 [ 7.042612] Adding 2048248k swap on /dev/sda7. Priority:-1 extents:1 across:2048248k [ 7.325274] EXT3 FS on sda5, internal journal [ 8.973704] device-mapper: uevent: version 1.0.3 [ 8.974790] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 10.103575] kjournald starting. Commit interval 5 seconds [ 10.103820] EXT3 FS on sda1, internal journal [ 10.103825] EXT3-fs: mounted filesystem with ordered data mode. [ 10.119391] kjournald starting. Commit interval 5 seconds [ 10.119641] EXT3 FS on sda9, internal journal [ 10.119646] EXT3-fs: mounted filesystem with ordered data mode. [ 10.132913] kjournald starting. Commit interval 5 seconds [ 10.132913] EXT3 FS on sda10, internal journal [ 10.132913] EXT3-fs: mounted filesystem with ordered data mode. [ 10.144806] kjournald starting. Commit interval 5 seconds [ 10.145081] EXT3 FS on sda6, internal journal [ 10.145085] EXT3-fs: mounted filesystem with ordered data mode. [ 10.164030] kjournald starting. Commit interval 5 seconds [ 10.164311] EXT3 FS on sda8, internal journal [ 10.164315] EXT3-fs: mounted filesystem with ordered data mode. [ 10.587329] ip_tables: (C) 2000-2006 Netfilter Core Team [ 10.712006] nf_conntrack version 0.5.0 (8184 buckets, 32736 max)