Bootdata ok (command line is auto BOOT_IMAGE=linux-up ro root=901 splash=silent) Linux version 2.6.12-std26-up-alt3 (builder@amd64.office.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Mon Aug 8 14:59:51 MSD 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable) BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data) BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000fa810 ACPI: RSDT (v001 A M I OEMRSDT 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0000 ACPI: FADT (v001 A M I OEMFACP 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0200 ACPI: MADT (v001 A M I OEMAPIC 0x10000427 MSFT 0x00000097) @ 0x000000003ffb0390 ACPI: OEMB (v001 A M I OEMBIOS 0x10000427 MSFT 0x00000097) @ 0x000000003ffc0040 ACPI: DSDT (v001 A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000 On node 0 totalpages: 262064 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 257968 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:15 APIC version 16 ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux-up ro root=901 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 1802.382 MHz processor. time.c: Using PIT/TSC based timekeeping. Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1026548k/1048256k available (1649k kernel code, 21004k reserved, 938k data, 168k init) Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00 ACPI: Looking for DSDT in initrd... not found! Using local APIC timer interrupts. Detected 12.516 MHz APIC timer. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:08: ioport range 0x680-0x6ff has been reserved pnp: 00:08: ioport range 0x290-0x297 has been reserved IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1124361926.166:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 6144k, total 131072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found. Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP established hash table entries: 262144 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 1 ACPI wakeup devices: PCI0 PS2K PS2M UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard on isa0060/serio0 VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide1 at 0x170-0x177,0x376 on irq 15 SCSI subsystem initialized libata version 1.11 loaded. sata_via version 1.1 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 4 sata_via(0000:00:0f.0): routed to hard irq line 4 ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 20 ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 20 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_via ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48 Losing some ticks... checking if CPU frequency changed. ata2: dev 0 configured for UDMA/133 scsi1 : sata_via Vendor: ATA Model: ST3160827AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: ST3160827AS Rev: 3.42 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB) SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 < sdb5 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 md: raid1 personality registered as nr 3 md: raid0 personality registered as nr 2 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb5 ... md: adding sdb5 ... md: sdb1 has different UUID to sdb5 md: adding sda5 ... md: sda1 has different UUID to sdb5 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: md0: setting max_sectors to 128, segment boundary to 32767 raid0: looking at sdb1 raid0: comparing sdb1(3124544) with sdb1(3124544) raid0: END raid0: ==> UNIQUE raid0: 1 zones raid0: looking at sda1 raid0: comparing sda1(3124544) with sdb1(3124544) raid0: EQUAL raid0: FINAL 1 zones raid0: done. raid0 : md_size is 6249088 blocks. raid0 : conf->hash_spacing is 6249088 blocks. raid0 : nb_zone is 1. raid0 : Allocating 8 bytes for hash. md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 168k freed Executing init=/sbin/init Real Time Clock Driver v1.12 Adding 2097136k swap on /dev/md0. Priority:-1 extents:1 EXT3 FS on md1, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5 uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected input.c: calling hotplug without a hotplug agent defined input: PC Speaker logips2pp: Detected unknown logitech mouse model 99 input.c: calling hotplug without a hotplug agent defined input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xdc000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1250 $ Ben Collins ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Via IRQ fixup for 0000:00:07.0, from 11 to 0 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[f9900000-f99007ff] Max Packet=[2048] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 sk98lin: Network Device Driver v8.16.2.3 (C)Copyright 1999-2005 Marvell(R). ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17 eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State NET: Registered protocol family 17 VP_IDE: IDE controller at PCI slot 0000:00:0f.1 ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio VP_IDE: port 0x0170 already claimed by ide1 Probing IDE interface ide0... ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800000bf5b0] eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] lp0: using parport0 (interrupt-driven). lp0: console ready ----------- [cut here ] --------- [please bite here ] --------- Kernel BUG at "mm/page_alloc.c":683 invalid operand: 0000 [1] CPU 0 Modules linked in: lp thermal processor button ide_cd cdrom i2c_viapro i2c_core via82cxxx af_packet sk98lin ohci1394 ieee1394 shpchp pci_hotplug amd64_agp agpgart 8250_pnp 8250 serial_core parport_pc parport evdev floppy pcspkr psmouse uhci_hcd ehci_hcd usbcore dm_mod rtc raid0 raid1 ext3 jbd mbcache sata_via libata sd_mod scsi_mod ide_disk ide_generic ide_core Pid: 29495, comm: m4 Not tainted 2.6.12-std26-up-alt3 RIP: 0010:[] {buffered_rmqueue+297} RSP: 0000:ffff810007b3fcd8 EFLAGS: 00010202 RAX: 0000000000000001 RBX: ffffffff802f2b60 RCX: 0000000000000000 RDX: 000000000002000a RSI: ffff810001700230 RDI: ffffffff802f2b60 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000c68 R11: 0000000000000000 R12: ffff810001700230 R13: ffffffff802f2b98 R14: ffffffff802f3200 R15: 0000000000000000 FS: 00002aaaab147a60(0000) GS:ffffffff803cfd00(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000518e6f8 CR3: 0000000007b0d000 CR4: 00000000000006e0 Process m4 (pid: 29495, threadinfo ffff810007b3e000, task ffff81003d84f1b0) Stack: 0000001f00000000 000000000000001f 000080d2091c0560 0000000000000046 0000000000000256 ffffffff802f2b60 0000000000000001 ffff81000293bc70 0000000000000000 ffffffff802f3200 Call Trace:{__alloc_pages+194} {do_no_page+249} {handle_mm_fault+400} {do_page_fault+1000} {do_munmap+491} {schedule+197} {error_exit+0} Code: 0f 0b a3 43 2b 80 ff ff ff ff ab 02 48 8b 93 f0 01 00 00 bf RIP {buffered_rmqueue+297} RSP