Attachment 1064 Details for Bug 7707 – dmesg

dmesg

1.txt (text/plain), 15.66 KB, created by Vasya Borisov on 2005-08-19 14:43:52 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Vasya Borisov

Created: 2005-08-19 14:43:52 MSD

Size: 15.66 KB

patch

obsolete

>Bootdata ok (command line is auto BOOT_IMAGE=linux-up ro root=901 splash=silent)
>Linux version 2.6.12-std26-up-alt3 (builder@amd64.office.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Mon Aug 8 14:59:51 MSD 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000fa810
>ACPI: RSDT (v001 A M I  OEMRSDT  0x10000427 MSFT 0x00000097) @ 0x000000003ffb0000
>ACPI: FADT (v001 A M I  OEMFACP  0x10000427 MSFT 0x00000097) @ 0x000000003ffb0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000427 MSFT 0x00000097) @ 0x000000003ffb0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x10000427 MSFT 0x00000097) @ 0x000000003ffc0040
>ACPI: DSDT (v001  A0036 A0036001 0x00000001 MSFT 0x0100000d) @ 0x0000000000000000
>On node 0 totalpages: 262064
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 257968 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:bf780000)
>Built 1 zonelists
>Kernel command line: auto BOOT_IMAGE=linux-up ro root=901 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz PM timer.
>time.c: Detected 1802.382 MHz processor.
>time.c: Using PIT/TSC based timekeeping.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1026548k/1048256k available (1649k kernel code, 21004k reserved, 938k data, 168k init)
>Calibrating delay loop... 3530.75 BogoMIPS (lpj=1765376)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
>ACPI: Looking for DSDT in initrd... not found!
>Using local APIC timer interrupts.
>Detected 12.516 MHz APIC timer.
>testing NMI watchdog ... OK.
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:08: ioport range 0x680-0x6ff has been reserved
>pnp: 00:08: ioport range 0x290-0x297 has been reserved
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1124361926.166:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20000080000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6>...no good signature found.
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 8192 buckets, 64Kbytes
>TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCI0 PS2K PS2M UAR2 UAR1 AC97 USB1 USB2 USB3 USB4 EHCI PWRB SLPB 
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>input: AT Translated Set 2 keyboard on isa0060/serio0
>VFS: Mounted root (romfs filesystem) readonly.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>ide1 at 0x170-0x177,0x376 on irq 15
>SCSI subsystem initialized
>libata version 1.11 loaded.
>sata_via version 1.1
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 4
>sata_via(0000:00:0f.0): routed to hard irq line 4
>ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 20
>ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 20
>ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
>ata1: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_via
>ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:407f
>ata2: dev 0 ATA, max UDMA/133, 312581808 sectors: lba48
>Losing some ticks... checking if CPU frequency changed.
>ata2: dev 0 configured for UDMA/133
>scsi1 : sata_via
>  Vendor: ATA       Model: ST3160827AS       Rev: 3.42
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ATA       Model: ST3160827AS       Rev: 3.42
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 >
>Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
>md: raid1 personality registered as nr 3
>md: raid0 personality registered as nr 2
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb5 ...
>md:  adding sdb5 ...
>md: sdb1 has different UUID to sdb5
>md:  adding sda5 ...
>md: sda1 has different UUID to sdb5
>md: created md1
>md: bind<sda5>
>md: bind<sdb5>
>md: running: <sdb5><sda5>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>md0: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdb1
>raid0:   comparing sdb1(3124544) with sdb1(3124544)
>raid0:   END
>raid0:   ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda1
>raid0:   comparing sda1(3124544) with sdb1(3124544)
>raid0:   EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 6249088 blocks.
>raid0 : conf->hash_spacing is 6249088 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 168k freed
>Executing init=/sbin/init
>Real Time Clock Driver v1.12
>Adding 2097136k swap on /dev/md0.  Priority:-1 extents:1
>EXT3 FS on md1, internal journal
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000
>ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 5
>uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 5
>uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
>uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 5
>uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>input.c: calling hotplug without a hotplug agent defined
>input: PC Speaker
>logips2pp: Detected unknown logitech mouse model 99
>input.c: calling hotplug without a hotplug agent defined
>input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xdc000000
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Via IRQ fixup for 0000:00:07.0, from 11 to 0
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[f9900000-f99007ff]  Max Packet=[2048]
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
>sk98lin: Network Device Driver v8.16.2.3
>(C)Copyright 1999-2005 Marvell(R).
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
>      PrefPort:A  RlmtMode:Check Link State
>NET: Registered protocol family 17
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
>VP_IDE: port 0x0170 already claimed by ide1
>Probing IDE interface ide0...
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800000bf5b0]
>eth0: network connection up using port A
>    speed:           100
>    autonegotiation: yes
>    duplex mode:     full
>    flowctrl:        symmetric
>    irq moderation:  disabled
>    scatter-gather:  enabled
>    tx-checksum:     enabled
>    rx-checksum:     enabled
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>----------- [cut here ] --------- [please bite here ] ---------
>Kernel BUG at "mm/page_alloc.c":683
>invalid operand: 0000 [1] 
>CPU 0 
>Modules linked in: lp thermal processor button ide_cd cdrom i2c_viapro i2c_core via82cxxx af_packet sk98lin ohci1394 ieee1394 shpchp pci_hotplug amd64_agp agpgart 8250_pnp 8250 serial_core parport_pc parport evdev floppy pcspkr psmouse uhci_hcd ehci_hcd usbcore dm_mod rtc raid0 raid1 ext3 jbd mbcache sata_via libata sd_mod scsi_mod ide_disk ide_generic ide_core
>Pid: 29495, comm: m4 Not tainted 2.6.12-std26-up-alt3
>RIP: 0010:[<ffffffff801535a9>] <ffffffff801535a9>{buffered_rmqueue+297}
>RSP: 0000:ffff810007b3fcd8  EFLAGS: 00010202
>RAX: 0000000000000001 RBX: ffffffff802f2b60 RCX: 0000000000000000
>RDX: 000000000002000a RSI: ffff810001700230 RDI: ffffffff802f2b60
>RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
>R10: 0000000000000c68 R11: 0000000000000000 R12: ffff810001700230
>R13: ffffffff802f2b98 R14: ffffffff802f3200 R15: 0000000000000000
>FS:  00002aaaab147a60(0000) GS:ffffffff803cfd00(0000) knlGS:0000000000000000
>CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 000000000518e6f8 CR3: 0000000007b0d000 CR4: 00000000000006e0
>Process m4 (pid: 29495, threadinfo ffff810007b3e000, task ffff81003d84f1b0)
>Stack: 0000001f00000000 000000000000001f 000080d2091c0560 0000000000000046 
>       0000000000000256 ffffffff802f2b60 0000000000000001 ffff81000293bc70 
>       0000000000000000 ffffffff802f3200 
>Call Trace:<ffffffff80153882>{__alloc_pages+194} <ffffffff8015df09>{do_no_page+249}
>       <ffffffff8015e3a0>{handle_mm_fault+400} <ffffffff8011d058>{do_page_fault+1000}
>       <ffffffff80160d7b>{do_munmap+491} <ffffffff80298af5>{schedule+197}
>       <ffffffff8010efad>{error_exit+0} 
>
>Code: 0f 0b a3 43 2b 80 ff ff ff ff ab 02 48 8b 93 f0 01 00 00 bf 
>RIP <ffffffff801535a9>{buffered_rmqueue+297} RSP <ffff810007b3fcd8>

Actions: View

Attachments on bug 7707: 1064