Attachment 1177 Details for Bug 8208 – xorg.conf

xorg.conf

xorg.conf (text/plain), 16.54 KB, created by Max A Mazin on 2005-10-14 10:42:06 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Max A Mazin

Created: 2005-10-14 10:42:06 MSD

Size: 16.54 KB

patch

obsolete

>
># File: xorg.conf
># File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
># Note by ATI: the below copyright notice is there for servicing possibly
># pending third party rights on the file format and the instance of this file.
>#
># Copyright (c) 1999 by The XFree86 Project, Inc.
>#
># Permission is hereby granted, free of charge, to any person obtaining a
># copy of this software and associated documentation files (the "Software"),
># to deal in the Software without restriction, including without limitation
># the rights to use, copy, modify, merge, publish, distribute, sublicense,
># and/or sell copies of the Software, and to permit persons to whom the
># Software is furnished to do so, subject to the following conditions:
># 
># The above copyright notice and this permission notice shall be included in
># all copies or substantial portions of the Software.
># 
># THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
># IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
># FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
># THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
># WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
># OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
># SOFTWARE.
># 
># Except as contained in this notice, the name of the XFree86 Project shall
># not be used in advertising or otherwise to promote the sale, use or other
># dealings in this Software without prior written authorization from the
># XFree86 Project.
>#
># **********************************************************************
># Refer to the XF86Config(4/5) man page for details about the format of 
># this file.
># **********************************************************************
># **********************************************************************
># DRI Section
># **********************************************************************
># **********************************************************************
># Module section -- this  section  is used to specify
># which dynamically loadable modules to load.
># **********************************************************************
>#
># **********************************************************************
># Files section.  This allows default font and rgb paths to be set
># **********************************************************************
># **********************************************************************
># Server flags section.
># **********************************************************************
># **********************************************************************
># Input devices
># **********************************************************************
># **********************************************************************
># Core keyboard's InputDevice section
># **********************************************************************
># **********************************************************************
># Core Pointer's InputDevice section
># **********************************************************************
># **********************************************************************
># Other input device sections 
># this is optional and is required only if you
># are using extended input devices.  This is for example only.  Refer
># to the XF86Config man page for a description of the options.
># **********************************************************************
>#
># Section "InputDevice" 
>#    Identifier  "Mouse2"
>#    Driver      "mouse"
>#    Option      "Protocol"      "MouseMan"
>#    Option      "Device"        "/dev/mouse2"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball"
>#    Driver     "magellan"
>#    Option     "Device"         "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "spaceball2"
>#    Driver     "spaceorb"
>#    Option     "Device"         "/dev/cua0"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen0"
>#    Driver     "microtouch"
>#    Option     "Device"         "/dev/ttyS0"
>#    Option     "MinX"           "1412"
>#    Option     "MaxX"           "15184"
>#    Option     "MinY"           "15372"
>#    Option     "MaxY"           "1230"
>#    Option     "ScreenNumber"   "0"
>#    Option     "ReportingMode"  "Scaled"
>#    Option     "ButtonNumber"   "1"
>#    Option     "SendCoreEvents"
># EndSection
>#
># Section "InputDevice"
>#    Identifier "touchscreen1"
>#    Driver     "elo2300"
>#    Option     "Device"         "/dev/ttyS0"
>#    Option     "MinX"           "231"
>#    Option     "MaxX"           "3868"
>#    Option     "MinY"           "3858"
>#    Option     "MaxY"           "272"
>#    Option     "ScreenNumber"   "0"
>#    Option     "ReportingMode"  "Scaled"
>#    Option     "ButtonThreshold"    "17"
>#    Option     "ButtonNumber"   "1"
>#    Option     "SendCoreEvents"
># EndSection
># **********************************************************************
># Monitor section
># **********************************************************************
># Any number of monitor sections may be present
># **********************************************************************
># Graphics device section
># **********************************************************************
># Any number of graphics device sections may be present
># Standard VGA Device:
># === ATI device section ===
>#Section "Device"
>#    Identifier                          "ATI Graphics Adapter"
>#    Driver                              "fglrx"
>## ### generic DRI settings ###
>## === disable PnP Monitor  ===
>#    #Option                              "NoDDC"
>## === disable/enable XAA/DRI ===
>#    Option "no_accel"                   "no"
>#    Option "no_dri"                     "no"
>## === misc DRI settings ===
>#    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
>## ### FireGL DDX driver module specific settings ###
>## === Screen Management ===
>#    Option "DesktopSetup"               "0x00000000" 
>#    Option "MonitorLayout"              "AUTO, AUTO"
>#    Option "IgnoreEDID"                 "off"
>#    Option "HSync2"                     "unspecified" 
>#    Option "VRefresh2"                  "unspecified" 
>#    Option "ScreenOverlap"              "0" 
>## === TV-out Management ===
>#    Option "NoTV"                       "yes"     
>#    Option "TVStandard"                 "NTSC-M"     
>#    Option "TVHSizeAdj"                 "0"     
>#    Option "TVVSizeAdj"                 "0"     
>#    Option "TVHPosAdj"                  "0"     
>#    Option "TVVPosAdj"                  "0"     
>#    Option "TVHStartAdj"                "0"     
>#    Option "TVColorAdj"                 "0"     
>#    Option "GammaCorrectionI"           "0x00000000"
>#    Option "GammaCorrectionII"          "0x00000000"
>## === OpenGL specific profiles/settings ===
>#    Option "Capabilities"               "0x00000000"
>## === Video Overlay for the Xv extension ===
>#    Option "VideoOverlay"               "on"
>## === OpenGL Overlay ===
>## Note: When OpenGL Overlay is enabled, Video Overlay
>##       will be disabled automatically
>#    Option "OpenGLOverlay"              "off"
>## === Center Mode (Laptops only) ===
>#    Option "CenterMode"                 "off"
>## === Pseudo Color Visuals (8-bit visuals) ===
>#    Option "PseudoColorVisuals"         "off"
>## === QBS Management ===
>#    Option "Stereo"                     "off"
>#    Option "StereoSyncEnable"           "1"
>## === FSAA Management ===
>#    Option "FSAAEnable"                 "no"
>#    Option "FSAAScale"                  "1"
>#    Option "FSAADisableGamma"           "no"
>#    Option "FSAACustomizeMSPos"         "no"
>#    Option "FSAAMSPosX0"                "0.000000"
>#    Option "FSAAMSPosY0"                "0.000000"
>#    Option "FSAAMSPosX1"                "0.000000"
>#    Option "FSAAMSPosY1"                "0.000000"
>#    Option "FSAAMSPosX2"                "0.000000"
>#    Option "FSAAMSPosY2"                "0.000000"
>#    Option "FSAAMSPosX3"                "0.000000"
>#    Option "FSAAMSPosY3"                "0.000000"
>#    Option "FSAAMSPosX4"                "0.000000"
>#    Option "FSAAMSPosY4"                "0.000000"
>#    Option "FSAAMSPosX5"                "0.000000"
>#    Option "FSAAMSPosY5"                "0.000000"
>## === Misc Options ===
>#    Option "UseFastTLS"                 "0"
>#    Option "BlockSignalsOnLock"         "on"
>#    Option "UseInternalAGPGART"         "yes"
>#    Option "ForceGenericCPU"            "no"
>##    BusID "PCI:1:0:0"    # no device found at config time
>#    Screen 0
>#EndSection
># **********************************************************************
># Screen sections
># **********************************************************************
># Any number of screen sections may be present.  Each describes
># the configuration of a single screen.  A single specific screen section
># may be specified from the X server command line with the "-screen"
># option.
># **********************************************************************
># ServerLayout sections.
># **********************************************************************
># Any number of ServerLayout sections may be present.  Each describes
># the way multiple screens are organised.  A specific ServerLayout
># section may be specified from the X server command line with the
># "-layout" option.  In the absence of this, the first section is used.
># When now ServerLayout section is present, the first Screen section
># is used alone.
>### EOF ###
>
>Section "ServerLayout"
>
># The Identifier line must be present
># Each Screen line specifies a Screen section name, and optionally
># the relative position of other screens.  The four names after
># primary screen name are the screens to the top, bottom, left and right
># of the primary screen.
># Each InputDevice line specifies an InputDevice section name and
># optionally some options to specify the way the device is to be
># used.  Those options include "CorePointer", "CoreKeyboard" and
># "SendCoreEvents".
>	Identifier     "Server Layout"
>	Screen         "Screen0" 0 0
>	InputDevice    "Mouse1" "CorePointer"
>	InputDevice    "Keyboard1" "CoreKeyboard"
>EndSection
>
>Section "Files"
>
># The location of the RGB database.  Note, this is the name of the
># file minus the extension (like ".txt" or ".db").  There is normally
># no need to change the default.
># Multiple FontPath entries are allowed (which are concatenated together),
># as well as specifying multiple comma-separated entries in one FontPath
># command (or a combination of both methods)
># 
># If you don't have a floating point coprocessor and emacs, Mosaic or other
># programs take long to start up, try moving the Type1 and Speedo directory
># to the end of this list (or comment them out).
># 
>#    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
>#    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
># The module search path.  The default path is shown here.
>#    ModulePath "/usr/X11R6/lib/modules"
>	RgbPath      "/usr/X11R6/lib/X11/rgb"
>	FontPath     "unix/:-1"
>EndSection
>
>Section "Module"
>
># This loads the DBE extension module.
># This loads the miscellaneous extensions module, and disables
># initialisation of the XFree86-DGA extension within that module.
># This loads the Type1 and FreeType font modules
>#	Load  "glx"   # libglx.a
>	Load  "dri"   # libdri.a
>	Load  "dbe"  	# Double buffer extension
>	Load  "extmod"
>#      Option    "omit xfree86-dga" 
>	Load  "type1"
>	Load  "freetype"
># This loads the GLX module
>EndSection
>
>Section "InputDevice"
>
># For most OSs the protocol can be omitted (it defaults to "Standard").
># When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
># uncomment the following line.
>#    Option "Protocol"   "Xqueue"
>#    Option "Xleds"      "1 2 3"
>#    Option "LeftAlt"    "Meta"
>#    Option "RightAlt"   "ModeShift"
># To customise the XKB settings to suit your keyboard, modify the
># lines below (which are the defaults).  For example, for a non-U.S.
># keyboard, you will probably want to use:
>#    Option "XkbModel"   "pc102"
># If you have a US Microsoft Natural keyboard, you can use:
>#    Option "XkbModel"   "microsoft"
>#
># Then to change the language, change the Layout setting.
># For example, a german layout can be obtained with:
>#    Option "XkbLayout"  "de"
># or:
>#    Option "XkbLayout"  "de"
>#    Option "XkbVariant" "nodeadkeys"
>#
># If you'd like to switch the positions of your capslock and
># control keys, use:
>#    Option "XkbOptions" "ctrl:swapcaps"
># These are the default XKB settings for XFree86
>#    Option "XkbModel"   "pc101"
>#    Option "XkbLayout"  "us"
>#    Option "XkbVariant" ""
>#    Option "XkbOptions" ""
>#    Option "XkbDisable"
>	Identifier  "Keyboard1"
>	Driver      "kbd"
>	Option	    "AutoRepeat" "500 30"
># Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
>	Option	    "XkbModel" "pc105"
>	Option	    "XkbLayout" "us,ru"
>	Option	    "XkbVariant" ",winkeys"
>	Option	    "XkbOptions" "grp:ctrl_shift_toggle"
>EndSection
>
>Section "InputDevice"
>
># Identifier and driver
># the following line.
>#    Option "Protocol"   "Xqueue"
># Baudrate and SampleRate are only for some Logitech mice. In
># almost every case these lines should be omitted.
>#    Option "BaudRate"   "9600"
>#    Option "SampleRate" "150"
># Emulate3Buttons is an option for 2-button Microsoft mice
># Emulate3Timeout is the timeout in milliseconds (default is 50ms)
>#    Option "Emulate3Buttons"
>#    Option "Emulate3Timeout"    "50"
># ChordMiddle is an option for some 3-button Logitech mice
>#    Option "ChordMiddle"
>	Identifier  "Mouse1"
>	Driver      "mouse"
>	Option	    "Protocol" "ImPS/2"
>	Option	    "ZAxisMapping" "4 5"
>	Option	    "Device" "/dev/input/mice"
># When using XQUEUE, comment out the above two lines, and uncomment
>EndSection
>
>Section "Monitor"
>
>#    Option "DPMS"
># === mode lines based on GTF ===
># VGA @ 100Hz
># Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
># SVGA @ 100Hz
># Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
># XVGA @ 100Hz
># Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
># 1152x864 @ 60Hz
># Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
># 1152x864 @ 85Hz
># Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
># 1152x864 @ 100Hz
># Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
># 1280x960 @ 75Hz
># Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
># 1280x960 @ 100Hz
># Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
># SXGA @ 100Hz
>	Identifier   "Monitor0"
>	HorizSync    31.5 - 79.0
>	VertRefresh  60.0 - 100.0
>#	ModeLine     "1280x1024@100" 81.0 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
>EndSection
>
>Section "Device"
>
># The chipset line is optional in most cases.  It can be used to override
># the driver's chipset detection, and should not normally be specified.
>#    Chipset     "generic"
># The Driver line must be present.  When using run-time loadable driver
># modules, this line instructs the server to load the specified driver
># module.  Even when not using loadable driver modules, this line
># indicates which driver should interpret the information in this section.
># The BusID line is used to specify which of possibly multiple devices
># this section is intended for.  When this line isn't present, a device
># section can only match up with the primary video device.  For PCI
># devices a line like the following could be used.  This line should not
># normally be included unless there is more than one video device
># installed.
>#    BusID       "PCI:0:10:0"
>#    VideoRam    256
>#    Clocks      25.2 28.3
>	Identifier  "Standard VGA"
>	Driver      "radeon"
>	VendorName  "Unknown"
>	BoardName   "Unknown"
>EndSection
>
>Section "Screen"
>
>#    Device      "ATI Graphics Adapter"
>#    DefaultDepth 24
>    #Option "backingstore"
>	Identifier "Screen0"
>	Device     "Standard VGA"
>	Monitor    "Monitor0"
>	DefaultDepth     16
>#	SubSection "Display"
>#		Depth     24
>#		Modes    "1280x1024"
>#	EndSubSection
>	SubSection "Display"
>		Depth     16
>		Modes    "1280x1024"
>	EndSubSection
>#	SubSection "Display"
>#		Depth     15
>#		Modes    "1280x1024"
>#	EndSubSection
>#	SubSection "Display"
>#		Depth     32
>#		Modes    "1280x1024"
>#	EndSubSection
>EndSection
>
>Section "DRI"
>
># Access to OpenGL ICD is allowed for all users:
># Access to OpenGL ICD is restricted to a specific user group:
>#    Group 100    # users
>#    Mode 0660
>	Mode         0666
>EndSection
>

Actions: View

Attachments on bug 8208: 1177 | 1178 | 1179 | 1180 | 1187 | 1188 | 1189 | 1190 | 1199