Attachment 1344 Details for Bug 8875 – dmesg

dmesg

dmesg (text/plain), 18.91 KB, created by Igor Muratov on 2006-01-19 15:06:24 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Igor Muratov

Created: 2006-01-19 15:06:24 MSK

Size: 18.91 KB

patch

obsolete

>Linux version 2.6.12-std26-up-alt6 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Thu Oct 27 10:34:10 MSD 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fee0000 (usable)
> BIOS-e820: 000000001fee0000 - 000000001fee3000 (ACPI NVS)
> BIOS-e820: 000000001fee3000 - 000000001fef0000 (ACPI data)
> BIOS-e820: 000000001fef0000 - 000000001ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>found SMP MP-table at 000f36c0
>On node 0 totalpages: 130784
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 126688 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f75b0
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee3040
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee30c0
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x1fee9700
>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee9800
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fee9640
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:15 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 1ff00000 (gap: 1ff00000:c0100000)
>Built 1 zonelists
>Kernel command line: auto BOOT_IMAGE=linux-up ro root=803 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 1809.318 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 515008k/523136k available (1496k kernel code, 7628k reserved, 738k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 3579.90 BogoMIPS (lpj=1789952)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
>CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000000 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000000 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Athlon(tm) 64 Processor 3000+ stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: Looking for DSDT in initrd... not found!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=0 pin2=-1
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 430k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 3.00 entry at 0xfa850, last bus=5
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:09.0
>Boot video device is 0000:05:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>audit: initializing netlink socket (disabled)
>audit(1137454484.647:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>vesafb: framebuffer at 0xd8000000, mapped to 0xe0880000, using 6144k, total 131072k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:d2a0
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>Console: switching to colour frame buffer device 128x45
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>HUB0 XVR0 XVR1 XVR2 XVR3 USB0 USB2 MMAC MMCI UAR1 
>ACPI: (supports S0 S3 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>input: AT Translated Set 2 keyboard on isa0060/serio0
>VFS: Mounted root (romfs filesystem) readonly.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 162
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>SCSI subsystem initialized
>libata version 1.11 loaded.
>sata_nv version 0.8
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xCC00 irq 23
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xCC08 irq 23
>ata1: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f
>ata1: dev 0 ATA, max UDMA/100, 160836480 sectors: lba48
>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
>ata1: dev 0 configured for UDMA/100
>scsi0 : sata_nv
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_nv
>  Vendor: ATA       Model: HDS722580VLSA80   Rev: V32O
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 160836480 512-byte hdwr sectors (82348 MB)
>SCSI device sda: drive cache: write back
> sda:<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda1 sda2 <<4>nv_sata: Primary device added
>nv_sata: Primary device removed
>nv_sata: Secondary device added
>nv_sata: Secondary device removed
> sda5 > sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xB800 irq 22
>ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xB808 irq 22
>ata3: no device found (phy stat 00000000)
>scsi2 : sata_nv
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_nv
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 184k freed
>Executing init=/sbin/init
>Adding 522072k swap on /dev/sda5.  Priority:-1 extents:1
>EXT3 FS on sda3, internal journal
>Real Time Clock Driver v1.12
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>subfs 0.9
>ip_tables: (C) 2000-2002 Netfilter core team
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCJ] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>intel8x0_measure_ac97_clock: measured 49708 usecs
>intel8x0: clocking to 46784
>Linux video capture interface: v1.00
>saa7130/34: v4l2 driver version 0.2.12 loaded
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>saa7134[0]: found at 0000:01:08.0, rev: 1, irq: 18, latency: 32, mmio: 0xfdeff000
>saa7134[0]: subsystem: 5168:0138, board: LifeView FlyVIDEO3000 [card=2,autodetected]
>saa7134[0]: board init: gpio is 38500
>saa7134[0]: there are different flyvideo cards with different tuners
>saa7134[0]: out there, you might have to use the tuner=<nr> insmod
>saa7134[0]: option to override the default value.
>input.c: calling hotplug without a hotplug agent defined
>saa7134[0]: registered input device for IR
>saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>tuner 0-0061: chip found @ 0xc2 (saa7134[0])
>tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>saa7134[0]: registered device video0 [v4l2]
>saa7134[0]: registered device vbi0
>saa7134[0]: registered device radio0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: nVidia Corporation CK804 USB Controller
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: irq 20, io mem 0xfe02e000
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: nVidia Corporation CK804 USB Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7504
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>input.c: calling hotplug without a hotplug agent defined
>input: PC Speaker
>saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [default]
>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>input.c: calling hotplug without a hotplug agent defined
>input: GenPS/2 Genius Wheel Mouse on isa0060/serio1
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-2: nForce2 SMBus adapter at 0x1c40
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.35.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>eth0: forcedeth.c: subsystem: 01019:1b51 bound to 0000:00:0a.0
>eth0: no link during initialization.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Address64 -------- Resource unparsed
>shpchp: Address64 -------- Resource unparsed
>shpchp: Address64 -------- Resource unparsed
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>NET: Registered protocol family 17
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Power Button (FF) [PWRF]
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (39 C)
>Linux agpgart interface v0.101 (c) Dave Jones
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7676  Fri Jul 29 12:58:54 PDT 2005
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 1 changed to on
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 2 changed to on
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 3 changed to on
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 4 changed to on
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 5 changed to on
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3).
>bootsplash: status on console 11 changed to on
>eth0: no link during initialization.
>zcip uses obsolete (PF_INET,SOCK_PACKET)
>eth0: Promiscuous mode enabled.
>device eth0 entered promiscuous mode
>device eth0 left promiscuous mode
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>CSLIP: code copyright 1989 Regents of the University of California
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root

Actions: View

Attachments on bug 8875: 1344