Linux version 2.6.12-std26-up-alt4 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Aug 16 16:28:22 MSD 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001dfb0000 (usable) BIOS-e820: 000000001dfb0000 - 000000001dfbe000 (ACPI data) BIOS-e820: 000000001dfbe000 - 000000001dfe0000 (ACPI NVS) BIOS-e820: 000000001dfe0000 - 000000001e000000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 479MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 122800 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 118704 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fb1a0 ACPI: XSDT (v001 A M I OEMXSDT 0x10000519 MSFT 0x00000097) @ 0x1dfb0100 ACPI: FADT (v003 A M I OEMFACP 0x10000519 MSFT 0x00000097) @ 0x1dfb0290 ACPI: MADT (v001 A M I OEMAPIC 0x10000519 MSFT 0x00000097) @ 0x1dfb0390 ACPI: MCFG (v001 A M I OEMMCFG 0x10000519 MSFT 0x00000097) @ 0x1dfb0400 ACPI: OEMB (v001 A M I AMI_OEM 0x10000519 MSFT 0x00000097) @ 0x1dfbe040 ACPI: DSDT (v001 A0313 A0313001 0x00000001 INTL 0x02002026) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1780000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux-up ro root=801 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 3067.404 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 483196k/491200k available (1496k kernel code, 7444k reserved, 738k data, 184k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6029.31 BogoMIPS (lpj=3014656) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000651d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 3.06GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 495k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:05.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled. ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 pnp: 00:0c: ioport range 0xc00-0xc0f has been reserved pnp: 00:0c: ioport range 0xd00-0xd0f has been reserved pnp: 00:0c: ioport range 0xa20-0xa2f has been reserved pnp: 00:0c: ioport range 0xa30-0xa3f has been reserved audit: initializing netlink socket (disabled) audit(1147517521.760:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) NET: Registered protocol family 1 ACPI wakeup devices: PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PE2P SLT1 SLT2 PS2K PS2M UAR1 LAN USB0 USB1 USB2 UB20 AC97 AZAL ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard on isa0060/serio0 VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 0000:00:1f.0 ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21 ALI15X3: chipset revision 199 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:DMA ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hdb: GCR-8525B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... Probing IDE interface ide1... Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... SCSI subsystem initialized libata version 1.11 loaded. PCI: Enabling device 0000:00:1f.1 (0105 -> 0107) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21 ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE482 bmdma 0xE000 irq 21 ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 21 ata3: SATA max UDMA/133 cmd 0xEC08 ctl 0xE486 bmdma 0xE010 irq 21 ata4: SATA max UDMA/133 cmd 0xE408 ctl 0xE086 bmdma 0xE018 irq 21 ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:407f ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_uli ata2: no device found (phy stat 00000000) scsi1 : sata_uli ata3: no device found (phy stat 00000000) scsi2 : sata_uli ata4: no device found (phy stat 00000000) scsi3 : sata_uli Vendor: ATA Model: WDC WD800JD-55MU Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 184k freed Executing init=/sbin/init Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 EXT3 FS on sda1, internal journal Real Time Clock Driver v1.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 logips2pp: Detected unknown logitech mouse model 85 Linux agpgart interface v0.101 (c) Dave Jones fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [fglrx] Maximum main memory to use for locked dma buffers: 403 MBytes. ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17 [fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. subfs 0.9 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1c.3: ALi Corporation USB 2.0 Controller ehci_hcd 0000:00:1c.3: debug port 1 ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1c.3: irq 23, io mem 0xdffff800 PCI: cache line size of 128 is not supported by device 0000:00:1c.3 ehci_hcd 0000:00:1c.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:1c.0: ALi Corporation USB 1.1 Controller ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:1c.0: irq 17, io mem 0xdfffc000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:1c.1: ALi Corporation USB 1.1 Controller (#2) ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:1c.1: irq 18, io mem 0xdfffd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 19 ohci_hcd 0000:00:1c.2: ALi Corporation USB 1.1 Controller (#3) ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:1c.2: irq 19, io mem 0xdfffe000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Linux Tulip driver version 1.1.13 (May 11, 2002) ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20 tulip0: Old style EEPROM with no media selection information. tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1. eth0: ULi M5261/M5263 rev 80 at 0001e800, EEPROM not present, 00:4C:69:6E:75:79, IRQ 20. ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS? ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted. ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted. hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ACPI: Power Button (FF) [PWRF] input.c: calling hotplug without a hotplug agent defined input: PC Speaker ACPI: Processor [CPU1] (supports 8 throttling states) NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out eth0: Out-of-sync dirty pointer, 120236 vs. 120269. Unable to handle kernel paging request at virtual address 59bf34e9 printing eip: c017001b *pde = 00000000 Oops: 0000 [#1] Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010246 (2.6.12-std26-up-alt4) EIP is at sync_sb_inodes+0x1bb/0x280 eax: 59bf34dd ebx: c4fd3980 ecx: 00000000 edx: c159a000 esi: c15e12e8 edi: dd08e000 ebp: dd08e084 esp: c159bee7 ds: 007b es: 007b ss: 0068 Process pdflush (pid: 135, threadinfo=c159a000 task=c14b9520) Stack: 59a000c1 08e07cc1 000000dd 12f0c900 08e00000 08e040dd 2b70f4dd 59bf34c0 170168c1 08e000c0 59bf34dd 59bf34c1 130451c1 0014bc00 13c1e000 13b988c0 59bf34c0 127b99c1 11561900 000000c0 00000000 59bf2c00 0003e1c1 00001f00 Call Trace: Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe <6>NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out eth0: Out-of-sync dirty pointer, 120268 vs. 120302. NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out eth0: Out-of-sync dirty pointer, 120300 vs. 120334. NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out eth0: Out-of-sync dirty pointer, 120332 vs. 120365. NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out Unable to handle kernel paging request at virtual address 5bdf40e9 printing eip: c017001b *pde = 00000000 Oops: 0000 [#2] Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010246 (2.6.12-std26-up-alt4) EIP is at sync_sb_inodes+0x1bb/0x280 eax: 5bdf40dd ebx: c8212d00 ecx: 00000000 edx: c15bc000 esi: c15e12e8 edi: dd08e000 ebp: dd08e084 esp: c15bdee3 ds: 007b es: 007b ss: 0068 Process pdflush (pid: 136, threadinfo=c15bc000 task=c14b9020) Stack: 5bc000c1 08e07cc1 000000dd 15a20300 08e00000 08e040dd 2b70f4dd 5bdf40c0 170168c1 08e000c0 5bdf40dd 0000aac1 5bdf4000 5bdf30c1 5bdf28c1 13b874c1 5bdf40c0 002ff8c1 005ff000 0000aa00 00000000 011dc900 00000000 00000000 Call Trace: Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe <1>Unable to handle kernel paging request at virtual address 527f58e9 printing eip: c017001b *pde = 00000000 Oops: 0000 [#3] Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010246 (2.6.12-std26-up-alt4) EIP is at sync_sb_inodes+0x1bb/0x280 eax: 527f58dd ebx: c5e48980 ecx: 00000000 edx: d1526000 esi: c15e12e8 edi: dd08e000 ebp: dd08e084 esp: d1527f2b ds: 007b es: 007b ss: 0068 Process shutdown (pid: 8275, threadinfo=d1526000 task=c14b9520) Stack: 526000c5 08e07cd1 000000dd 15a20300 0000aa00 04c4c000 0006aa08 52600000 1701dcd1 08e000c0 527f58dd 000000d1 00000200 00000000 001fee00 00000100 00000000 00000000 00000000 00000000 00000000 00000100 23b60000 08e000dd Call Trace: Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe <1>Unable to handle kernel paging request at virtual address 53894c4b printing eip: c016feb7 *pde = 00000000 Oops: 0000 [#4] Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core CPU: 0 EIP: 0060:[] Tainted: P VLI EFLAGS: 00010283 (2.6.12-std26-up-alt4) EIP is at sync_sb_inodes+0x57/0x280 eax: c0169450 ebx: c02b783c ecx: c02b7844 edx: d1526000 esi: 53894c43 edi: dd08e000 ebp: dd08e084 esp: d1527f2c ds: 007b es: 007b ss: 0068 Process shutdown (pid: 8277, threadinfo=d1526000 task=c14b9520) Stack: d1526000 dd08e07c 00000000 0015a23a 000000af 0804c4c0 000006aa d1526000 c01701dc dd08e000 d1527f58 00000000 00000002 00000000 00001ff9 00000000 00000000 00000000 00000000 00000000 00000000 00000001 dd23b600 dd08e000 Call Trace: [] sync_inodes_sb+0x6c/0x80 [] sync_inodes+0x18/0x80 [] do_sync+0x13/0x60 [] sys_sync+0x7/0x10 [] syscall_call+0x7/0xb Code: 74 6e 89 f6 39 e8 74 51 8d 4f 7c b8 00 e0 ff ff 89 4c 24 04 21 e0 89 04 24 8b 8f 88 00 00 00 8d 59 f8 8b 83 9c 00 00 00 8b 70 38 46 08 02 74 6b 8b 41 04 8b 11 89 10 89 42 04 8b 47 7c 89 01 <6>NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out NETDEV WATCHDOG: eth0: transmit timed out