Attachment 1485 Details for Bug 9560 – tulip oops dmesg

tulip oops dmesg

dmesg-20060513-ws5.lv-tulip (text/plain), 19.28 KB, created by Michael Shigorin on 2006-05-13 15:36:26 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Shigorin

Created: 2006-05-13 15:36:26 MSD

Size: 19.28 KB

patch

obsolete

>Linux version 2.6.12-std26-up-alt4 (builder@salto.malta.altlinux.ru) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 Tue Aug 16 16:28:22 MSD 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dfb0000 (usable)
> BIOS-e820: 000000001dfb0000 - 000000001dfbe000 (ACPI data)
> BIOS-e820: 000000001dfbe000 - 000000001dfe0000 (ACPI NVS)
> BIOS-e820: 000000001dfe0000 - 000000001e000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>479MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 122800
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 118704 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.3 present.
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fb1a0
>ACPI: XSDT (v001 A M I  OEMXSDT  0x10000519 MSFT 0x00000097) @ 0x1dfb0100
>ACPI: FADT (v003 A M I  OEMFACP  0x10000519 MSFT 0x00000097) @ 0x1dfb0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000519 MSFT 0x00000097) @ 0x1dfb0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x10000519 MSFT 0x00000097) @ 0x1dfb0400
>ACPI: OEMB (v001 A M I  AMI_OEM  0x10000519 MSFT 0x00000097) @ 0x1dfbe040
>ACPI: DSDT (v001  A0313 A0313001 0x00000001 INTL 0x02002026) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1780000)
>Built 1 zonelists
>Kernel command line: auto BOOT_IMAGE=linux-up ro root=801
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 3067.404 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 483196k/491200k available (1496k kernel code, 7444k reserved, 738k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 6029.31 BogoMIPS (lpj=3014656)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: bfebfbff 20000000 00000000 00000080 0000651d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Celeron(R) CPU 3.06GHz stepping 01
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: Looking for DSDT in initrd... not found!
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 495k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
>PCI: Using MMCONFIG
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:05.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE2P._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15), disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15), disabled.
>ACPI: PCI Interrupt Link [LNKP] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>pnp: 00:0c: ioport range 0xc00-0xc0f has been reserved
>pnp: 00:0c: ioport range 0xd00-0xd0f has been reserved
>pnp: 00:0c: ioport range 0xa20-0xa2f has been reserved
>pnp: 00:0c: ioport range 0xa30-0xa3f has been reserved
>audit: initializing netlink socket (disabled)
>audit(1147517521.760:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>NET: Registered protocol family 1
>ACPI wakeup devices: 
>PCE2 PCE3 PCE4 PCE5 PCE6 PCE7 PE2P SLT1 SLT2 PS2K PS2M UAR1  LAN USB0 USB1 USB2 UB20 AC97 AZAL 
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>input: AT Translated Set 2 keyboard on isa0060/serio0
>VFS: Mounted root (romfs filesystem) readonly.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 0000:00:1f.0
>ACPI: PCI Interrupt 0000:00:1f.0[A] -> GSI 21 (level, low) -> IRQ 21
>ALI15X3: chipset revision 199
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:DMA
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hdb: GCR-8525B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>SCSI subsystem initialized
>libata version 1.11 loaded.
>PCI: Enabling device 0000:00:1f.1 (0105 -> 0107)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 21 (level, low) -> IRQ 21
>ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE482 bmdma 0xE000 irq 21
>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 21
>ata3: SATA max UDMA/133 cmd 0xEC08 ctl 0xE486 bmdma 0xE010 irq 21
>ata4: SATA max UDMA/133 cmd 0xE408 ctl 0xE086 bmdma 0xE018 irq 21
>ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3e01 87:4023 88:407f
>ata1: dev 0 ATA, max UDMA/133, 156301488 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>scsi0 : sata_uli
>ata2: no device found (phy stat 00000000)
>scsi1 : sata_uli
>ata3: no device found (phy stat 00000000)
>scsi2 : sata_uli
>ata4: no device found (phy stat 00000000)
>scsi3 : sata_uli
>  Vendor: ATA       Model: WDC WD800JD-55MU  Rev: 10.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 184k freed
>Executing init=/sbin/init
>Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1
>EXT3 FS on sda1, internal journal
>Real Time Clock Driver v1.12
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>logips2pp: Detected unknown logitech mouse model 85
>Linux agpgart interface v0.101 (c) Dave Jones
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 403 MBytes.
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>[fglrx] module loaded - fglrx 8.18.6 [Oct 11 2005] on minor 0
>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
>ts: Compaq touchscreen protocol output
>device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>subfs 0.9
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 23
>ehci_hcd 0000:00:1c.3: ALi Corporation USB 2.0 Controller
>ehci_hcd 0000:00:1c.3: debug port 1
>ehci_hcd 0000:00:1c.3: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1c.3: irq 23, io mem 0xdffff800
>PCI: cache line size of 128 is not supported by device 0000:00:1c.3
>ehci_hcd 0000:00:1c.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>ohci_hcd 0000:00:1c.0: ALi Corporation USB 1.1 Controller
>ohci_hcd 0000:00:1c.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:1c.0: irq 17, io mem 0xdfffc000
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 18 (level, low) -> IRQ 18
>ohci_hcd 0000:00:1c.1: ALi Corporation USB 1.1 Controller (#2)
>ohci_hcd 0000:00:1c.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:1c.1: irq 18, io mem 0xdfffd000
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:1c.2: ALi Corporation USB 1.1 Controller (#3)
>ohci_hcd 0000:00:1c.2: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:1c.2: irq 19, io mem 0xdfffe000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 3 ports detected
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Linux Tulip driver version 1.1.13 (May 11, 2002)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 20
>tulip0: Old style EEPROM with no media selection information.
>tulip0:  MII transceiver #1 config 3100 status 7869 advertising 01e1.
>eth0: ULi M5261/M5263 rev 80 at 0001e800, EEPROM not present, 00:4C:69:6E:75:79, IRQ 20.
>ali1535_smbus 0000:00:1e.1: ALI1535_smb region uninitialized - upgrade BIOS?
>ali1535_smbus 0000:00:1e.1: ALI1535 not detected, module not inserted.
>ali15x3_smbus 0000:00:1e.1: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
>ali15x3_smbus 0000:00:1e.1: ALI15X3 not detected, module not inserted.
>hdb: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Power Button (FF) [PWRF]
>input.c: calling hotplug without a hotplug agent defined
>input: PC Speaker
>ACPI: Processor [CPU1] (supports 8 throttling states)
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Out-of-sync dirty pointer, 120236 vs. 120269.
>Unable to handle kernel paging request at virtual address 59bf34e9
> printing eip:
>c017001b
>*pde = 00000000
>Oops: 0000 [#1]
>Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core
>CPU:    0
>EIP:    0060:[<c017001b>]    Tainted: P      VLI
>EFLAGS: 00010246   (2.6.12-std26-up-alt4) 
>EIP is at sync_sb_inodes+0x1bb/0x280
>eax: 59bf34dd   ebx: c4fd3980   ecx: 00000000   edx: c159a000
>esi: c15e12e8   edi: dd08e000   ebp: dd08e084   esp: c159bee7
>ds: 007b   es: 007b   ss: 0068
>Process pdflush (pid: 135, threadinfo=c159a000 task=c14b9520)
>Stack: 59a000c1 08e07cc1 000000dd 12f0c900 08e00000 08e040dd 2b70f4dd 59bf34c0 
>       170168c1 08e000c0 59bf34dd 59bf34c1 130451c1 0014bc00 13c1e000 13b988c0 
>       59bf34c0 127b99c1 11561900 000000c0 00000000 59bf2c00 0003e1c1 00001f00 
>Call Trace:
>Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe 
> <6>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Out-of-sync dirty pointer, 120268 vs. 120302.
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Out-of-sync dirty pointer, 120300 vs. 120334.
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>eth0: Out-of-sync dirty pointer, 120332 vs. 120365.
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>Unable to handle kernel paging request at virtual address 5bdf40e9
> printing eip:
>c017001b
>*pde = 00000000
>Oops: 0000 [#2]
>Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core
>CPU:    0
>EIP:    0060:[<c017001b>]    Tainted: P      VLI
>EFLAGS: 00010246   (2.6.12-std26-up-alt4) 
>EIP is at sync_sb_inodes+0x1bb/0x280
>eax: 5bdf40dd   ebx: c8212d00   ecx: 00000000   edx: c15bc000
>esi: c15e12e8   edi: dd08e000   ebp: dd08e084   esp: c15bdee3
>ds: 007b   es: 007b   ss: 0068
>Process pdflush (pid: 136, threadinfo=c15bc000 task=c14b9020)
>Stack: 5bc000c1 08e07cc1 000000dd 15a20300 08e00000 08e040dd 2b70f4dd 5bdf40c0 
>       170168c1 08e000c0 5bdf40dd 0000aac1 5bdf4000 5bdf30c1 5bdf28c1 13b874c1 
>       5bdf40c0 002ff8c1 005ff000 0000aa00 00000000 011dc900 00000000 00000000 
>Call Trace:
>Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe 
> <1>Unable to handle kernel paging request at virtual address 527f58e9
> printing eip:
>c017001b
>*pde = 00000000
>Oops: 0000 [#3]
>Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core
>CPU:    0
>EIP:    0060:[<c017001b>]    Tainted: P      VLI
>EFLAGS: 00010246   (2.6.12-std26-up-alt4) 
>EIP is at sync_sb_inodes+0x1bb/0x280
>eax: 527f58dd   ebx: c5e48980   ecx: 00000000   edx: d1526000
>esi: c15e12e8   edi: dd08e000   ebp: dd08e084   esp: d1527f2b
>ds: 007b   es: 007b   ss: 0068
>Process shutdown (pid: 8275, threadinfo=d1526000 task=c14b9520)
>Stack: 526000c5 08e07cd1 000000dd 15a20300 0000aa00 04c4c000 0006aa08 52600000 
>       1701dcd1 08e000c0 527f58dd 000000d1 00000200 00000000 001fee00 00000100 
>       00000000 00000000 00000000 00000000 00000000 00000100 23b60000 08e000dd 
>Call Trace:
>Code: 8b 4a 04 89 48 04 89 01 8b 47 7c 89 01 82 ff 7f 04 8b 4c 24 04 89 57 7c 89 4a 04 e8 e0 50 10 00 53 e8 3a 89 ff ff 5b 8b 44 24 28 <8b> 48 0c 85 c9 0f 8e bf fe ff ff 39 af 84 00 00 00 0f 85 73 fe 
> <1>Unable to handle kernel paging request at virtual address 53894c4b
> printing eip:
>c016feb7
>*pde = 00000000
>Oops: 0000 [#4]
>Modules linked in: thermal processor pcspkr button ide_cd cdrom i2c_ali15x3 i2c_ali1535 i2c_core tulip shpchp pci_hotplug ati_agp ohci_hcd ehci_hcd usbcore subfs dm_mod tsdev evdev fglrx agpgart floppy psmouse rtc ext3 jbd mbcache sata_uli libata sd_mod scsi_mod ide_disk ide_generic alim15x3 ide_core
>CPU:    0
>EIP:    0060:[<c016feb7>]    Tainted: P      VLI
>EFLAGS: 00010283   (2.6.12-std26-up-alt4) 
>EIP is at sync_sb_inodes+0x57/0x280
>eax: c0169450   ebx: c02b783c   ecx: c02b7844   edx: d1526000
>esi: 53894c43   edi: dd08e000   ebp: dd08e084   esp: d1527f2c
>ds: 007b   es: 007b   ss: 0068
>Process shutdown (pid: 8277, threadinfo=d1526000 task=c14b9520)
>Stack: d1526000 dd08e07c 00000000 0015a23a 000000af 0804c4c0 000006aa d1526000 
>       c01701dc dd08e000 d1527f58 00000000 00000002 00000000 00001ff9 00000000 
>       00000000 00000000 00000000 00000000 00000000 00000001 dd23b600 dd08e000 
>Call Trace:
> [<c01701dc>] sync_inodes_sb+0x6c/0x80
> [<c0170278>] sync_inodes+0x18/0x80
> [<c0152203>] do_sync+0x13/0x60
> [<c0152257>] sys_sync+0x7/0x10
> [<c0102d69>] syscall_call+0x7/0xb
>Code: 74 6e 89 f6 39 e8 74 51 8d 4f 7c b8 00 e0 ff ff 89 4c 24 04 21 e0 89 04 24 8b 8f 88 00 00 00 8d 59 f8 8b 83 9c 00 00 00 8b 70 38 <f6> 46 08 02 74 6b 8b 41 04 8b 11 89 10 89 42 04 8b 47 7c 89 01 
> <6>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out
>NETDEV WATCHDOG: eth0: transmit timed out

Actions: View

Attachments on bug 9560: 1485 | 1486