Linux version 2.6.16-wks26-up-alt8 (builder@xeon.office.altlinux.ru) (gcc version 4.1.1 20060629 (ALT Linux, build 4.1.1-alt4)) #1 PREEMPT Tue Jul 11 02:45:48 MSD 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000007fd0000 (usable) BIOS-e820: 0000000007fd0000 - 0000000007fdf000 (ACPI data) BIOS-e820: 0000000007fdf000 - 0000000007fe0000 (ACPI NVS) BIOS-e820: 0000000007fe0000 - 0000000008000000 (reserved) BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 127MB LOWMEM available. On node 0 totalpages: 32720 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 28624 pages, LIFO batch:7 HighMem zone: 0 pages, LIFO batch:0 DMI 2.2 present. ACPI: RSDP (v000 IBM ) @ 0x000fd6e0 ACPI: RSDT (v001 IBM TP600R 0x00000001 0x00000000) @ 0x07fd0000 ACPI: FADT (v001 IBM TP600R 0x00000001 0x00000000) @ 0x07fd0100 ACPI: DSDT (v001 IBM TP600R 0x00000100 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0xef08 Allocating PCI resources starting at 10000000 (gap: 08000000:f7fe0000) Built 1 zonelists Kernel command line: BOOT_IMAGE=2616-wks26-up-8 ro root=305 Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (01101000) Enabling fast FPU save and restore... done. Initializing CPU#0 PID hash table entries: 512 (order: 9, 8192 bytes) Detected 397.173 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x50 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 126460k/130880k available (1439k kernel code, 3876k reserved, 566k data, 168k init, 0k highmem, 0k BadRAM) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 795.08 BogoMIPS (lpj=397543) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel Mobile Pentium II stepping 0a Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found. ACPI: setting ELCR to 0200 (from 0800) checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 146k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI PCI quirk: region efa0-efaf claimed by PIIX4 SMB PIIX4 devres B PIO at 02f8-02ff PIIX4 devres C PIO at 15e8-15ef PIIX4 devres E PIO at 0538-053f PIIX4 devres G PIO at 0130-013f PIIX4 devres I PIO at 002e-002f Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT] ACPI: Power Resource [PSIO] (on) ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode. ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PVID] (on) ACPI: Power Resource [PRSD] (on) ACPI: Power Resource [PDCK] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 18 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca) pnp: 00:0d: ioport range 0x15e0-0x15ef has been reserved pnp: 00:0d: ioport range 0xef00-0xef3f could not be reserved pnp: 00:0d: ioport range 0xefa0-0xefaf has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0 PCI: Bridge: 0000:00:01.0 IO window: d000-dfff MEM window: 70000000-dfffffff PREFETCH window: e0000000-f7ffffff PCI: Bus 2, cardbus bridge: 0000:00:02.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 10000000-11ffffff MEM window: 12000000-13ffffff PCI: Bus 6, cardbus bridge: 0000:00:02.1 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 14000000-15ffffff MEM window: 16000000-17ffffff ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug. ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 0, using IRQ 9 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug. ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 9 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 audit: initializing netlink socket (disabled) audit(1154733771.814:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode Suspend2 Core. Suspend2 Compression Driver loading. Suspend2 Encryption Driver loading. Suspend2 Swap Writer loading. ACPI wakeup devices: LID0 SLPB PCI0 UAR1 MWV0 BAT0 USB0 ACPI: (supports S0 S1 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IBM-DCXA-210000, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-C2102, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 19640880 sectors (10056 MB) w/420KiB Cache, CHS=19485/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 < hda5 hda6 hda7 > Suspend2 2.2.5: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image. Suspend2 2.2.5: Resume2 parameter is empty. Suspending will be disabled. Suspend2 2.2.5: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending. VFS: Mounted root (ext2 filesystem) readonly. Trying to move old root to /initrd ... /initrd does not exist. Ignored. Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 168k freed Executing init=/sbin/init Adding 362840k swap on /dev/hda6. Priority:-1 extents:1 across:362840k Real Time Clock Driver v1.12ac ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 neofb: mapped io at c8980000 Autodetected internal display Panel is a 1024x768 color TFT display neofb: mapped framebuffer at c8c00000 neofb v0.4.2: 2560kB VRAM, using 1024x768, 48.364kHz, 60Hz Console: switching to colour frame buffer device 128x48 fb0: MagicGraph 256AV frame buffer device device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com subfs 0.9 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9 Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62 Yenta TI: socket 0000:00:02.0 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:02.0 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x0498, PCI irq 0 Socket status: 30000006 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62 Yenta TI: socket 0000:00:02.1 probing PCI interrupt failed, trying to fix Yenta TI: socket 0000:00:02.1 no PCI interrupts. Fish. Please report. Yenta: no PCI IRQ, CardBus support disabled for this socket. Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings. Yenta: ISA IRQ mask 0x0498, PCI irq 0 Socket status: 30000006 pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. NET: Registered protocol family 23 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug. ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 10 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 irq 10: nobody cared (try booting with the "irqpoll" option) [] __report_bad_irq+0x2b/0x69 [] note_interrupt+0x1ba/0x1e7 [] handle_IRQ_event+0x17/0x4c [] handle_IRQ_event+0x23/0x4c [] __do_IRQ+0x92/0xd1 [] do_IRQ+0x46/0x53 [] common_interrupt+0x1a/0x20 [] suspend_mark_pages_for_pageset2+0x235/0x2c1 [] __do_softirq+0x2c/0x7f [] do_softirq+0x22/0x26 [] irq_exit+0x25/0x30 [] do_IRQ+0x4b/0x53 [] common_interrupt+0x1a/0x20 [] setup_irq+0xbb/0xfb [] usb_hcd_irq+0x0/0x4f [usbcore] [] request_irq+0x6f/0x8b [] usb_add_hcd+0x1e7/0x50b [usbcore] [] usb_hcd_pci_probe+0x1e5/0x279 [usbcore] [] __driver_attach+0x0/0x59 [] pci_device_probe+0x36/0x57 [] driver_probe_device+0x3f/0x88 [] __driver_attach+0x36/0x59 [] bus_for_each_dev+0x33/0x55 [] driver_attach+0x11/0x13 [] __driver_attach+0x0/0x59 [] bus_add_driver+0x64/0xfa [] __pci_register_driver+0x59/0x75 [] uhci_hcd_init+0x91/0xce [uhci_hcd] [] sys_init_module+0x137b/0x1502 [] generic_file_read+0x98/0xac [] unmap_vmas+0x438/0x492 [] free_pgtables+0x69/0x78 [] autoremove_wake_function+0x0/0x2d [] unmap_region+0xa5/0xed [] vfs_read+0x9f/0x144 [] sys_read+0x3c/0x63 [] syscall_call+0x7/0xb handlers: [] (usb_hcd_irq+0x0/0x4f [usbcore]) Disabling IRQ #10 uhci_hcd 0000:00:07.2: irq 10, io base 0x00008400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected IBM TrackPoint firmware: 0x0b, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input1 ts: Compaq touchscreen protocol output hdc: ATAPI 20X DVD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Sleep Button (CM) [SLPB] input: PC Speaker as /class/input/input2 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (58 C) ACPI: Thermal Zone [THM2] (35 C) ACPI: Thermal Zone [THM6] (31 C) ACPI: Thermal Zone [THM7] (27 C) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: unable to find recovery directory /var/lib/nfs/v4recovery NFSD: starting 90-second grace period get_unused_fd: slot 65 not NULL! get_unused_fd: slot 65 not NULL!