Linux version 2.6.18-std-smp-alt4 (builder@mash.office.altlinux.ru) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Fri Feb 16 19:43:34 MSK 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5050 On node 0 totalpages: 262128 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32752 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v000 Nvidia ) @ 0x000f6a60 ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000 ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040 ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7680 ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:7 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Detected 2288.238 MHz processor. Built 1 zonelists. Total pages: 262128 Kernel command line: BOOT_IMAGE=linux-smp ro root=302 acpi_use_timer_override panic=0 apic=debug mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1035072k/1048512k available (1577k kernel code, 12772k reserved, 602k data, 192k init, 131008k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4579.15 BogoMIPS (lpj=9158303) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed checking if image is initramfs... it is Freeing initrd memory: 621k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 02 Getting VERSION: 40010 Getting VERSION: 40010 Getting ID: 0 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 Total of 1 processors activated (4579.15 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... failed. ...trying to set up timer as ExtINT IRQ... works. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2288.1275 MHz. ..... host bus clock speed is 208.0115 MHz. Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: Power Resource [ISAV] (on) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled. ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled. ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-6 -> 0x59 -> IRQ 6 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-4 -> 0x49 -> IRQ 4 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-3 -> 0x41 -> IRQ 3 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-7 -> 0x61 -> IRQ 7 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-12 -> 0x89 -> IRQ 12 Mode:0 Active:0) IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0) pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 1 0 0 0 0 1 1 39 02 001 01 1 0 0 0 0 0 0 00 03 001 01 1 0 0 0 0 1 1 41 04 001 01 1 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 1 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 1 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 1 0 0 0 0 1 1 89 0d 001 01 1 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 Using vector-based indexing IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. pnp: 00:00: ioport range 0x1000-0x107f could not be reserved pnp: 00:00: ioport range 0x1080-0x10ff has been reserved pnp: 00:00: ioport range 0x1400-0x147f has been reserved pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved pnp: 00:00: ioport range 0x1800-0x187f has been reserved pnp: 00:00: ioport range 0x1880-0x18ff has been reserved PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: d0000000-d2ffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:0e.0 IO window: a000-bfff MEM window: d3000000-d4ffffff PREFETCH window: 50000000-500fffff PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1172302792.672:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 192k freed Time: tsc clocksource has been installed. Executing init=/init Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE3-250: IDE controller at PCI slot 0000:00:08.0 NFORCE3-250: chipset revision 162 NFORCE3-250: not 100% native mode: will probe irqs later NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 hda: IC35L120AVV207-0, ATA DISK drive hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: ST3200822A, ATA DISK drive hdd: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 241252607 sectors (123521 MB) native capacity is 241254720 sectors (123522 MB) hda: Host Protected Area disabled. hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > hdc: max request size: 512KiB hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdc: cache flushes supported hdc: hdc1 hdc2 SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:0a.0: version 2.0 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 16 Mode:1 Active:0) ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 169 PCI: Setting latency timer of device 0000:00:0a.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 169 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 169 scsi0 : sata_nv ata1: SATA link down (SStatus 0 SControl 300) scsi1 : sata_nv ata2: SATA link down (SStatus 0 SControl 300) SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda2 Ending clean XFS mount for filesystem: hda2 ide-floppy driver 0.99.newide Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00 i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xb1 -> IRQ 17 Mode:1 Active:0) ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 177 PCI: Setting latency timer of device 0000:00:02.2 to 64 ehci_hcd 0000:00:02.2: EHCI Host Controller ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.2: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.2 ehci_hcd 0000:00:02.2: irq 177, io mem 0xd5004000 ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb9 -> IRQ 18 Mode:1 Active:0) ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 185 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 185, io mem 0xd5002000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.1 to 64 ohci_hcd 0000:00:02.1: OHCI Host Controller ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:02.1: irq 169, io mem 0xd5003000 hdb: No disk in drive usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xac00, speed 1217kHz usb 1-6: new high speed USB device using ehci_hcd and address 3 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193 skge 1.6 addr 0xd4000000 irq 193 chip Yukon-Lite rev 9 skge eth0: addr 00:0f:ea:cb:46:3b input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 ieee1394: Initialized config rom entry `ip1394' usb 1-6: configuration #1 chosen from 1 choice 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193 eth1: RealTek RTL8139 at 0xf89ee000, 00:02:44:6b:77:0e, IRQ 193 eth1: Identified 8139 chip type 'RTL-8100B/8139D' 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ts: Compaq touchscreen protocol output ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 20 Mode:1 Active:1) ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201] MMIO=[d4005000-d40057ff] Max Packet=[2] IR/IT contexts=[4/8] ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to setting max_packet_size to 512 bytes ieee1394: raw1394: /dev/raw1394 device initialized usb 2-2: new low speed USB device using ohci_hcd and address 2 usb 2-2: configuration #1 chosen from 1 choice usbcore: registered new driver libusual ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xd1 -> IRQ 21 Mode:1 Active:1) ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 209 Initializing USB Mass Storage driver... scsi2 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver hiddev input: Razer Razer Diamondback Optical Mouse as /class/input/input3 input: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:02.0-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver Adding 755012k swap on /dev/hda1. Priority:50 extents:1 across:755012k Adding 136512k swap on /dev/hdc1. Priority:40 extents:1 across:136512k ieee1394: Host added: ID:BUS[0-00:1023] GUID[4d5a900003000000] device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com XFS mounting filesystem hda7 Ending clean XFS mount for filesystem: hda7 XFS mounting filesystem hda5 Ending clean XFS mount for filesystem: hda5 XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 XFS mounting filesystem hda8 Ending clean XFS mount for filesystem: hda8 XFS mounting filesystem hdc2 Ending clean XFS mount for filesystem: hdc2 subfs 0.9 Vendor: SanDisk Model: ImageMate 6 in 1 Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:0: Attached scsi removable disk sda Vendor: SanDisk Model: ImageMate 6 in 1 Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:1: Attached scsi removable disk sdb Vendor: SanDisk Model: ImageMate 6 in 1 Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:2: Attached scsi removable disk sdc Vendor: SanDisk Model: ImageMate 6 in 1 Rev: 0.0> Type: Direct-Access ANSI SCSI revision: 00 sd 2:0:0:3: Attached scsi removable disk sdd usb-storage: device scan complete sd 2:0:0:0: Attached scsi generic sg0 type 0 sd 2:0:0:1: Attached scsi generic sg1 type 0 sd 2:0:0:2: Attached scsi generic sg2 type 0 sd 2:0:0:3: Attached scsi generic sg3 type 0 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack ext: link up, 100Mbps, full-duplex, lpa 0x45E1 eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) skge int: enabling interface NET: Registered protocol family 17 it87: Found IT8712F chip at 0x290, revision 5 Linux agpgart interface v0.101 (c) Dave Jones nvidia: module license 'NVIDIA' taints kernel. ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 201 NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] hdb: No disk in drive