Attachment 1828 Details for Bug 10916 – acpi=debug dmesg

acpi=debug dmesg

dmesg-acpi=debug (text/plain), 21.77 KB, created by Michael Shigorin on 2007-02-24 12:06:35 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Michael Shigorin

Created: 2007-02-24 12:06:35 MSK

Size: 21.77 KB

patch

obsolete

>Linux version 2.6.18-std-smp-alt4 (builder@mash.office.altlinux.ru) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Fri Feb 16 19:43:34 MSK 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5050
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f6a60
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff7680
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:7 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 2288.238 MHz processor.
>Built 1 zonelists.  Total pages: 262128
>Kernel command line: BOOT_IMAGE=linux-smp ro root=302 acpi_use_timer_override panic=0 apic=debug
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1035072k/1048512k available (1577k kernel code, 12772k reserved, 602k data, 192k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4579.15 BogoMIPS (lpj=9158303)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 621k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 02
>Getting VERSION: 40010
>Getting VERSION: 40010
>Getting ID: 0
>Getting LVT0: 700
>Getting LVT1: 400
>enabled ExtINT on CPU#0
>Total of 1 processors activated (4579.15 BogoMIPS).
>ENABLING IO-APIC IRQs
>init IO_APIC IRQs
> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... failed.
>...trying to set up timer as ExtINT IRQ... works.
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 2288.1275 MHz.
>..... host bus clock speed is 208.0115 MHz.
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb1e0, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: Power Resource [ISAV] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>IOAPIC[0]: Set PCI routing entry (2-8 -> 0x69 -> IRQ 8 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-13 -> 0x91 -> IRQ 13 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-6 -> 0x59 -> IRQ 6 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-4 -> 0x49 -> IRQ 4 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-3 -> 0x41 -> IRQ 3 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-7 -> 0x61 -> IRQ 7 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-12 -> 0x89 -> IRQ 12 Mode:0 Active:0)
>IOAPIC[0]: Set PCI routing entry (2-1 -> 0x39 -> IRQ 1 Mode:0 Active:0)
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>number of MP IRQ sources: 15.
>number of IO-APIC #2 registers: 24.
>testing the IO APIC.......................
>IO APIC #2......
>.... register #00: 02000000
>.......    : physical APIC id: 02
>.......    : Delivery Type: 0
>.......    : LTS          : 0
>.... register #01: 00170011
>.......     : max redirection entries: 0017
>.......     : PRQ implemented: 0
>.......     : IO APIC version: 0011
>.... register #02: 02000000
>.......     : arbitration: 02
>.... IRQ redirection table:
> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
> 00 000 00  1    0    0   0   0    0    0    00
> 01 001 01  1    0    0   0   0    1    1    39
> 02 001 01  1    0    0   0   0    0    0    00
> 03 001 01  1    0    0   0   0    1    1    41
> 04 001 01  1    0    0   0   0    1    1    49
> 05 001 01  0    0    0   0   0    1    1    51
> 06 001 01  1    0    0   0   0    1    1    59
> 07 001 01  1    0    0   0   0    1    1    61
> 08 001 01  1    0    0   0   0    1    1    69
> 09 001 01  0    1    0   0   0    1    1    71
> 0a 001 01  0    0    0   0   0    1    1    79
> 0b 001 01  0    0    0   0   0    1    1    81
> 0c 001 01  1    0    0   0   0    1    1    89
> 0d 001 01  1    0    0   0   0    1    1    91
> 0e 001 01  0    0    0   0   0    1    1    99
> 0f 001 01  0    0    0   0   0    1    1    A1
> 10 000 00  1    0    0   0   0    0    0    00
> 11 000 00  1    0    0   0   0    0    0    00
> 12 000 00  1    0    0   0   0    0    0    00
> 13 000 00  1    0    0   0   0    0    0    00
> 14 000 00  1    0    0   0   0    0    0    00
> 15 000 00  1    0    0   0   0    0    0    00
> 16 000 00  1    0    0   0   0    0    0    00
> 17 000 00  1    0    0   0   0    0    0    00
>Using vector-based indexing
>IRQ to pin mappings:
>IRQ0 -> 0:2
>IRQ1 -> 0:1
>IRQ3 -> 0:3
>IRQ4 -> 0:4
>IRQ5 -> 0:5
>IRQ6 -> 0:6
>IRQ7 -> 0:7
>IRQ8 -> 0:8
>IRQ9 -> 0:9
>IRQ10 -> 0:10
>IRQ11 -> 0:11
>IRQ12 -> 0:12
>IRQ13 -> 0:13
>IRQ14 -> 0:14
>IRQ15 -> 0:15
>.................................... done.
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: d0000000-d2ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: a000-bfff
>  MEM window: d3000000-d4ffffff
>  PREFETCH window: 50000000-500fffff
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1172302792.672:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 192k freed
>Time: tsc clocksource has been installed.
>Executing init=/init
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE3-250: IDE controller at PCI slot 0000:00:08.0
>NFORCE3-250: chipset revision 162
>NFORCE3-250: not 100% native mode: will probe irqs later
>NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE3-250: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE3-250: 0000:00:08.0 (rev a2) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>input: AT Translated Set 2 keyboard as /class/input/input0
>hda: IC35L120AVV207-0, ATA DISK drive
>hdb: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: ST3200822A, ATA DISK drive
>hdd: _NEC DVD_RW ND-3520AW, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: Host Protected Area detected.
>	current capacity is 241252607 sectors (123521 MB)
>	native  capacity is 241254720 sectors (123522 MB)
>hda: Host Protected Area disabled.
>hda: 241254720 sectors (123522 MB) w/1821KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 >
>hdc: max request size: 512KiB
>hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
>hdc: cache flushes supported
> hdc: hdc1 hdc2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:0a.0: version 2.0
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
>IOAPIC[0]: Set PCI routing entry (2-22 -> 0xa9 -> IRQ 16 Mode:1 Active:0)
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22 (level, high) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 169
>ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 169
>scsi0 : sata_nv
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hda2
>Ending clean XFS mount for filesystem: hda2
>ide-floppy driver 0.99.newide
>Real Time Clock Driver v1.12ac
>input: PC Speaker as /class/input/input1
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
>IOAPIC[0]: Set PCI routing entry (2-21 -> 0xb1 -> IRQ 17 Mode:1 Active:0)
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 177, io mem 0xd5004000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
>IOAPIC[0]: Set PCI routing entry (2-20 -> 0xb9 -> IRQ 18 Mode:1 Active:0)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 20 (level, high) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 185, io mem 0xd5002000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 22 (level, high) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:02.1: irq 169, io mem 0xd5003000
>hdb: No disk in drive
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 4 ports detected
>hdb: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
>hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xac00, speed 1217kHz
>usb 1-6: new high speed USB device using ehci_hcd and address 3
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193
>skge 1.6 addr 0xd4000000 irq 193 chip Yukon-Lite rev 9
>skge eth0: addr 00:0f:ea:cb:46:3b
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ieee1394: Initialized config rom entry `ip1394'
>usb 1-6: configuration #1 chosen from 1 choice
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 193
>eth1: RealTek RTL8139 at 0xf89ee000, 00:02:44:6b:77:0e, IRQ 193
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>ts: Compaq touchscreen protocol output
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc9 -> IRQ 20 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 201
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[201]  MMIO=[d4005000-d40057ff]  Max Packet=[2]  IR/IT contexts=[4/8]
>ohci1394: fw-host0: Serial EEPROM has suspicious values, attempting to setting max_packet_size to 512 bytes
>ieee1394: raw1394: /dev/raw1394 device initialized
>usb 2-2: new low speed USB device using ohci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>usbcore: registered new driver libusual
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xd1 -> IRQ 21 Mode:1 Active:1)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 209
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver hiddev
>input: Razer Razer Diamondback Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:02.0-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Adding 755012k swap on /dev/hda1.  Priority:50 extents:1 across:755012k
>Adding 136512k swap on /dev/hdc1.  Priority:40 extents:1 across:136512k
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[4d5a900003000000]
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>XFS mounting filesystem hda7
>Ending clean XFS mount for filesystem: hda7
>XFS mounting filesystem hda5
>Ending clean XFS mount for filesystem: hda5
>XFS mounting filesystem hda3
>Ending clean XFS mount for filesystem: hda3
>XFS mounting filesystem hda8
>Ending clean XFS mount for filesystem: hda8
>XFS mounting filesystem hdc2
>Ending clean XFS mount for filesystem: hdc2
>subfs 0.9
>  Vendor: SanDisk   Model: ImageMate 6 in 1  Rev: 0.0>
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:0: Attached scsi removable disk sda
>  Vendor: SanDisk   Model: ImageMate 6 in 1  Rev: 0.0>
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:1: Attached scsi removable disk sdb
>  Vendor: SanDisk   Model: ImageMate 6 in 1  Rev: 0.0>
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:2: Attached scsi removable disk sdc
>  Vendor: SanDisk   Model: ImageMate 6 in 1  Rev: 0.0>
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 2:0:0:3: Attached scsi removable disk sdd
>usb-storage: device scan complete
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:1: Attached scsi generic sg1 type 0
>sd 2:0:0:2: Attached scsi generic sg2 type 0
>sd 2:0:0:3: Attached scsi generic sg3 type 0
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8191 buckets, 65528 max) - 228 bytes per conntrack
>ext: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
>skge int: enabling interface
>NET: Registered protocol family 17
>it87: Found IT8712F chip at 0x290, revision 5
>Linux agpgart interface v0.101 (c) Dave Jones
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 201
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9746  Fri Dec 15 09:54:45 PST 2006
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>hdb: No disk in drive

Actions: View

Attachments on bug 10916: 1827 | 1828