Linux version 2.6.18-std-smp-alt4 (raorn@inferno.immo) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Mar 12 23:54:49 MSK 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff30000 (usable) BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data) BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 130864 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126768 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000f9e30 ACPI: XSDT (v001 A M I OEMXSDT 0x10000414 MSFT 0x00000097) @ 0x1ff30100 ACPI: FADT (v003 A M I OEMFACP 0x10000414 MSFT 0x00000097) @ 0x1ff30290 ACPI: MADT (v001 A M I OEMAPIC 0x10000414 MSFT 0x00000097) @ 0x1ff30390 ACPI: OEMB (v001 A M I OEMBIOS 0x10000414 MSFT 0x00000097) @ 0x1ff40040 ACPI: DSDT (v001 P4C8B P4C8B106 0x00000106 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:2 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:2 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000) Detected 2399.024 MHz processor. Built 1 zonelists. Total pages: 130864 Kernel command line: BOOT_IMAGE=2618-std-smp-4-test ro root=805 rootflags=data=journal elevator=cfq mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x30 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514772k/523456k available (1577k kernel code, 8132k reserved, 602k data, 192k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4801.64 BogoMIPS (lpj=9603286) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 447k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4798.02 BogoMIPS (lpj=9596052) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Total of 2 processors activated (9599.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=93 NET: Registered protocol family 16 call_usermodehelper_keys /sbin/hotplug vtconsole BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] class_device_add+0x2ae/0x3ba [] class_device_create+0x7c/0x9c [] vtconsole_class_init+0x76/0xb9 [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources call_usermodehelper_keys /sbin/hotplug cpu BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] sysdev_register+0x53/0xbb [] register_cpu+0x22/0x48 [] topology_init+0x14/0x2b [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug cpu BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] sysdev_register+0x53/0xbb [] register_cpu+0x22/0x48 [] topology_init+0x14/0x2b [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_scan_init+0x61/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug acpi BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] device_add+0x1e3/0x2c8 [] acpi_scan_init+0xc8/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_scan_init+0x109/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_bus_scan+0x115/0x184 [] acpi_scan_init+0x16b/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_bus_scan+0x115/0x184 [] acpi_scan_init+0x16b/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_bus_scan+0x115/0x184 [] acpi_scan_init+0x16b/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: call_usermodehelper_keys /sbin/hotplug namespace BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys() [] show_trace_log_lvl+0x5b/0x16d [] show_trace+0xf/0x11 [] dump_stack+0x15/0x17 [] call_usermodehelper_keys+0xe3/0x114 [] kobject_uevent+0x3c7/0x405 [] kobject_register+0x2b/0x30 [] acpi_add_single_object+0x6e1/0x7e7 [] acpi_bus_scan+0x115/0x184 [] acpi_scan_init+0x16b/0x18d [] init+0x123/0x2bd [] kernel_thread_helper+0x5/0xb DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb Leftover inexact backtrace: ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0a: ioport range 0x680-0x6ff has been reserved pnp: 00:0a: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: fe900000-fe9fffff PREFETCH window: cff00000-efefffff PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fea00000-feafffff PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1173736517.676:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 192k freed Executing init=/init Time: tsc clocksource has been installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 hda: ST3120023A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 169 ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 169 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0xEFA7 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with journal data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP] FDC 0 is a post-1991 82077 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel i875 Chipset. agpgart: AGP aperture is 128M @ 0xf0000000 Real Time Clock Driver v1.12ac usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 185, io mem 0xfebffc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 193 sk98lin: Network Device Driver v8.36.1.3 (C)Copyright 1999-2006 Marvell(R). eth0: 3Com Gigabit LOM (3C940) PrefPort:A RlmtMode:Check Link State USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000ef00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ef20 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected 8139too Fast Ethernet driver 0.9.27 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ef40 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000ef80 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected gameport: EMU10K1 is pci0000:02:0c.1/gameport0, io 0xdfe0, speed 1065kHz ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 217 eth1: RealTek RTL8139 at 0xe0982c00, 00:40:f4:8f:21:60, IRQ 217 eth1: Identified 8139 chip type 'RTL-8100B/8139D' ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 225 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) usb 3-2: new full speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.9 usb 5-2: new low speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new driver hci_usb usbcore: registered new driver hiddev input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ts: Compaq touchscreen protocol output Adding 2000052k swap on /dev/sda6. Priority:-1 extents:1 across:2000052k EXT3 FS on sda5, internal journal CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] loop: loaded (max 32 devices) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with journal data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with journal data mode. IA-32 Microcode Update Driver: v1.14a Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (4089 buckets, 32712 max) - 228 bytes per conntrack ip_tables: (C) 2000-2006 Netfilter Core Team eth1: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: none irq moderation: disabled scatter-gather: enabled tx-checksum: enabled rx-checksum: enabled rx-polling: enabled w83627hf 9191-0290: Reading VID from GPIO5 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation) ata1: soft resetting port ata1.00: configured for UDMA/133 ata1: EH complete SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201 [drm] Initialized radeon 1.25.0 20060524 on minor 0: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present eth0: no IPv6 routers present QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard KQEMU installed, max_locked_mem=257788kB. [drm] Setting GART location based on new memory map [drm] Loading R300 Microcode [drm] writeback test succeeded in 1 usecs