Attachment 1854 Details for Bug 11055 – dmesg

dmesg

dmesg (text/plain), 26.08 KB, created by Sir Raorn on 2007-03-13 01:03:30 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Sir Raorn

Created: 2007-03-13 01:03:30 MSK

Size: 26.08 KB

patch

obsolete

>Linux version 2.6.18-std-smp-alt4 (raorn@inferno.immo) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Mon Mar 12 23:54:49 MSK 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
> BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
> BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
> BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 130864
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 126768 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f9e30
>ACPI: XSDT (v001 A M I  OEMXSDT  0x10000414 MSFT 0x00000097) @ 0x1ff30100
>ACPI: FADT (v003 A M I  OEMFACP  0x10000414 MSFT 0x00000097) @ 0x1ff30290
>ACPI: MADT (v001 A M I  OEMAPIC  0x10000414 MSFT 0x00000097) @ 0x1ff30390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x10000414 MSFT 0x00000097) @ 0x1ff40040
>ACPI: DSDT (v001  P4C8B P4C8B106 0x00000106 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
>Detected 2399.024 MHz processor.
>Built 1 zonelists.  Total pages: 130864
>Kernel command line: BOOT_IMAGE=2618-std-smp-4-test ro root=805 rootflags=data=journal elevator=cfq
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x30
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 514772k/523456k available (1577k kernel code, 8132k reserved, 602k data, 192k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4801.64 BogoMIPS (lpj=9603286)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 447k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4798.02 BogoMIPS (lpj=9596052)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
>Total of 2 processors activated (9599.66 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=93
>NET: Registered protocol family 16
>call_usermodehelper_keys /sbin/hotplug vtconsole
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c02125e6>] class_device_add+0x2ae/0x3ba
> [<c021277e>] class_device_create+0x7c/0x9c
> [<c0382f46>] vtconsole_class_init+0x76/0xb9
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>call_usermodehelper_keys /sbin/hotplug cpu
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c0210cbf>] sysdev_register+0x53/0xbb
> [<c02131ab>] register_cpu+0x22/0x48
> [<c03726e5>] topology_init+0x14/0x2b
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug cpu
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c0210cbf>] sysdev_register+0x53/0xbb
> [<c02131ab>] register_cpu+0x22/0x48
> [<c03726e5>] topology_init+0x14/0x2b
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c03806ef>] acpi_scan_init+0x61/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug acpi
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c02105bc>] device_add+0x1e3/0x2c8
> [<c0380756>] acpi_scan_init+0xc8/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c0380797>] acpi_scan_init+0x109/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c01efee1>] acpi_bus_scan+0x115/0x184
> [<c03807f9>] acpi_scan_init+0x16b/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c01efee1>] acpi_bus_scan+0x115/0x184
> [<c03807f9>] acpi_scan_init+0x16b/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c01efee1>] acpi_bus_scan+0x115/0x184
> [<c03807f9>] acpi_scan_init+0x16b/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>call_usermodehelper_keys /sbin/hotplug namespace
>BUG: warning at kernel/kmod.c:254/call_usermodehelper_keys()
> [<c010448a>] show_trace_log_lvl+0x5b/0x16d
> [<c0104b0a>] show_trace+0xf/0x11
> [<c0104c07>] dump_stack+0x15/0x17
> [<c012b6df>] call_usermodehelper_keys+0xe3/0x114
> [<c01b4406>] kobject_uevent+0x3c7/0x405
> [<c01b3e68>] kobject_register+0x2b/0x30
> [<c01efcc6>] acpi_add_single_object+0x6e1/0x7e7
> [<c01efee1>] acpi_bus_scan+0x115/0x184
> [<c03807f9>] acpi_scan_init+0x16b/0x18d
> [<c0100426>] init+0x123/0x2bd
> [<c0101005>] kernel_thread_helper+0x5/0xb
>DWARF2 unwinder stuck at kernel_thread_helper+0x5/0xb
>Leftover inexact backtrace:
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0a: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: cff00000-efefffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1173736517.676:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 192k freed
>Executing init=/init
>Time: tsc clocksource has been installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>input: AT Translated Set 2 keyboard as /class/input/input0
>hda: ST3120023A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xEFE0 ctl 0xEFAE bmdma 0xEF60 irq 169
>ata2: SATA max UDMA/133 cmd 0xEFA0 ctl 0xEFAA bmdma 0xEF68 irq 169
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0xEFA7
>  Vendor: ATA       Model: ST3250823AS       Rev: 3.03
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with journal data mode.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: PC Speaker as /class/input/input1
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>FDC 0 is a post-1991 82077
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Real Time Clock Driver v1.12ac
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 185, io mem 0xfebffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>hdc: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 193
>sk98lin: Network Device Driver v8.36.1.3
>(C)Copyright 1999-2006 Marvell(R).
>eth0: 3Com Gigabit LOM (3C940)
>      PrefPort:A  RlmtMode:Check Link State
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000ef00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 209
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ef20
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ef40
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 201, io base 0x0000ef80
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>gameport: EMU10K1 is pci0000:02:0c.1/gameport0, io 0xdfe0, speed 1065kHz
>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 217
>eth1: RealTek RTL8139 at 0xe0982c00, 00:40:f4:8f:21:60, IRQ 217
>eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
>ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 225
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>usb 5-2: configuration #1 chosen from 1 choice
>usbcore: registered new driver hci_usb
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.3-2
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ts: Compaq touchscreen protocol output
>Adding 2000052k swap on /dev/sda6.  Priority:-1 extents:1 across:2000052k
>EXT3 FS on sda5, internal journal
>CSLIP: code copyright 1989 Regents of the University of California
>PPP generic driver version 2.4.2
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>loop: loaded (max 32 devices)
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4089 buckets, 32712 max) - 228 bytes per conntrack
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>NET: Registered protocol family 17
>eth0: network connection up using port A
>    speed:           100
>    autonegotiation: yes
>    duplex mode:     full
>    flowctrl:        none
>    irq moderation:  disabled
>    scatter-gather:  enabled
>    tx-checksum:     enabled
>    rx-checksum:     enabled
>    rx-polling:      enabled
>w83627hf 9191-0290: Reading VID from GPIO5
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.00: tag 0 cmd 0xb0 Emask 0x2 stat 0x50 err 0x0 (HSM violation)
>ata1: soft resetting port
>ata1.00: configured for UDMA/133
>ata1: EH complete
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 201
>[drm] Initialized radeon 1.25.0 20060524 on minor 0: 
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>eth1: no IPv6 routers present
>eth0: no IPv6 routers present
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=257788kB.
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 11055: 1854