Attachment 1869 Details for Bug 10828 – загрузка с pci=noirq в 2.6.20

загрузка с pci=noirq в 2.6.20

dmesg (text/plain), 17.46 KB, created by stalker on 2007-03-20 00:02:29 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: stalker

Created: 2007-03-20 00:02:29 MSK

Size: 17.46 KB

patch

obsolete

>Linux version 2.6.20-std-smp-ant0.3 (stalker@f37.local) (gcc version 4.1.1 20061011 (ALT Linux, build 4.1.1-alt10)) #1 SMP Mon Mar 19 22:24:58 MSK 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fef0000 end: 000000007fff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fff0000 size: 0000000000003000 end: 000000007fff3000 type: 4
>copy_e820_map() start: 000000007fff3000 size: 000000000000d000 end: 0000000080000000 type: 3
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4060
>Entering add_active_range(0, 0, 524272) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>On node 0 totalpages: 524272
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292593 pages, LIFO batch:31
>DMI 2.2 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x000f8010
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff30c0
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x7fff9740
>ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9980
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff9680
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
>I/O APIC #2 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Detected 2009.344 MHz processor.
>Built 1 zonelists.  Total pages: 520177
>Kernel command line: BOOT_IMAGE=2620-std-smp-ant03 ro root=346 acpi=noirq root=/dev/hdd6
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2075364k/2097088k available (1615k kernel code, 20560k reserved, 641k data, 192k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xfff4f000 - 0xfffff000   ( 704 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc033c000 - 0xc036c000   ( 192 kB)
>      .data : 0xc0293f88 - 0xc0334754   ( 641 kB)
>      .text : 0xc0100000 - 0xc0293f88   (1615 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4021.95 BogoMIPS (lpj=8043916)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0e20 (from 0c20)
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4018.81 BogoMIPS (lpj=8037625)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
>Total of 2 processors activated (8040.77 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had 778 usecs TSC skew, fixed it up.
>CPU#1 had -778 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>migration_cost=127
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:0e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Probing PCI hardware
>pci 0000:00:04.0: Error creating sysfs bridge symlink, continuing...
>pci 0000:00:0e.0: Error creating sysfs bridge symlink, continuing...
>pci 0000:00:13.0: Error creating sysfs bridge symlink, continuing...
>pci 0000:00:15.0: Error creating sysfs bridge symlink, continuing...
>pci 0000:00:16.0: Error creating sysfs bridge symlink, continuing...
>pci 0000:00:17.0: Error creating sysfs bridge symlink, continuing...
>PCI->APIC IRQ transform: 0000:00:09.1[A] -> IRQ 5
>PCI->APIC IRQ transform: 0000:00:0a.0[A] -> IRQ 10
>PCI->APIC IRQ transform: 0000:00:0a.1[B] -> IRQ 11
>PCI->APIC IRQ transform: 0000:00:0d.0[A] -> IRQ 10
>PCI->APIC IRQ transform: 0000:00:0d.1[B] -> IRQ 11
>PCI->APIC IRQ transform: 0000:00:0d.2[C] -> IRQ 5
>PCI->APIC IRQ transform: 0000:00:0e.1[B] -> IRQ 5
>PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 10
>PCI->APIC IRQ transform: 0000:00:11.0[A] -> IRQ 11
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 10
>PCI->APIC IRQ transform: 0000:02:05.0[A] -> IRQ 5
>PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 11
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: a000-afff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: 8000-9fff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdf00000-fdffffff
>PCI: Bridge: 0000:00:13.0
>  IO window: 6000-7fff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:15.0
>  IO window: 5000-5fff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fda00000-fdafffff
>PCI: Bridge: 0000:00:16.0
>  IO window: 4000-4fff
>  MEM window: fd900000-fd9fffff
>  PREFETCH window: fd800000-fd8fffff
>PCI: Bridge: 0000:00:17.0
>  IO window: 3000-3fff
>  MEM window: fd700000-fd7fffff
>  PREFETCH window: fd600000-fd6fffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 369k freed
>audit: initializing netlink socket (disabled)
>audit(1174347635.788:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>0000:00:0a.1 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:13.0:pcie00]
>Allocate Port Service[0000:00:13.0:pcie03]
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:15.0:pcie00]
>Allocate Port Service[0000:00:15.0:pcie03]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>Allocate Port Service[0000:00:16.0:pcie03]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>Allocate Port Service[0000:00:17.0:pcie03]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>0000:02:05.0: ttyS1 at I/O 0x9c00 (irq = 5) is a 16550A
>0000:02:05.0: ttyS2 at I/O 0x9800 (irq = 5) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>input: AT Translated Set 2 keyboard as /class/input/input0
>ACPI: (supports S0 S1 S4 S5)
>Time: acpi_pm clocksource has been installed.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>JMB363: IDE controller at PCI slot 0000:03:00.0
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 11
>    ide0: BM-DMA at 0x6c00-0x6c07, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x6c08-0x6c0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: ST3160023A, ATA DISK drive
>hdd: MAXTOR 6L040J2, ATA DISK drive
>ide1 at 0x7400-0x7407,0x7002 on irq 11
>NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
>NFORCE-MCP55: chipset revision 161
>NFORCE-MCP55: not 100% native mode: will probe irqs later
>NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
>    ide2: BM-DMA at 0xf400-0xf407, BIOS settings: hde:DMA, hdf:DMA
>Probing IDE interface ide2...
>hde: TOSHIBA CD/DVDW SD-R5372, ATAPI CD/DVD-ROM drive
>ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide0...
>hdc: max request size: 512KiB
>hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
>hdc: cache flushes supported
> hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 >
>hdd: max request size: 128KiB
>hdd: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(133)
>hdd: cache flushes supported
> hdd: hdd1 hdd2 < hdd5 hdd6 >
>SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem hdd6
>Ending clean XFS mount for filesystem: hdd6
>VFS: Mounted root (xfs filesystem) readonly.
>Trying to move old root to /initrd ... /initrd does not exist. Ignored.
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 192k freed
>Real Time Clock Driver v1.12ac
>input: Power Button (FF) as /class/input/input1
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input2
>ACPI: Power Button (CM) [PWRB]
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>XFS mounting filesystem hdd1
>Ending clean XFS mount for filesystem: hdd1
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0a.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
>ehci_hcd 0000:00:0a.1: irq 11, io mem 0xfe02e000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>forcedeth: using HIGHDMA
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>eth0: forcedeth.c: subsystem: 01695:1026 bound to 0000:00:10.0
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>forcedeth: using HIGHDMA
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>eth1: forcedeth.c: subsystem: 01695:1026 bound to 0000:00:11.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0xfc00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0xf800
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:0a.0: irq 10, io mem 0xfe02f000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>ip_tables: (C) 2000-2006 Netfilter Core Team
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>NET: Registered protocol family 17
>input: PC Speaker as /class/input/input3
>FDC 0 is a post-1991 82077
>input: ImExPS/2 Logitech Wheel Mouse as /class/input/input4
>hde: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usb 1-7: new high speed USB device using ehci_hcd and address 2
>usb 1-7: configuration #1 chosen from 1 choice
>usbcore: registered new interface driver libusual
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
>SCSI device sda: 494592 512-byte hdwr sectors (253 MB)
>sda: Write Protect is off
>sda: Mode Sense: 0b 00 00 08
>sda: assuming drive cache: write through
>SCSI device sda: 494592 512-byte hdwr sectors (253 MB)
>sda: Write Protect is off
>sda: Mode Sense: 0b 00 00 08
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi removable disk sda
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0

Actions: View

Attachments on bug 10828: 1797 | 1798 | 1869