Linux version 2.6.18-std-smp-alt6 (builder@hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Apr 29 00:41:18 MSD 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
 BIOS-e820: 000000001ff60000 - 000000001ff7a000 (ACPI data)
 BIOS-e820: 000000001ff7a000 - 000000001ff7c000 (ACPI NVS)
 BIOS-e820: 000000001ff7c000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
On node 0 totalpages: 130912
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 126816 pages, LIFO batch:31
DMI present.
Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
Detected 1199.051 MHz processor.
Built 1 zonelists.  Total pages: 130912
Kernel command line: auto BOOT_IMAGE=linux-smp ro root=302 splash=verbose acpi=off
bootsplash: verbose mode.
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0140a000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 515128k/523648k available (1585k kernel code, 8068k reserved, 640k data, 192k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 2399.67 BogoMIPS (lpj=4799359)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 401k freed
CPU0: Intel(R) Pentium(R) III Mobile CPU      1200MHz stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd8fe, last bus=8
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f73e0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xa158, dseg 0x400
PnPBIOS: 23 nodes reported by PnP BIOS; 23 recorded by driver
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
PCI: Transparent bridge - 0000:00:1e.0
PCI: Discovered primary peer bus 09 [IRQ]
PCI: Using IRQ router PIIX/ICH [8086/248c] at 0000:00:1f.0
PCI: setting IRQ 11 as level-triggered
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0x1000-0x105f has been reserved
pnp: 00:0b: ioport range 0x1060-0x107f has been reserved
pnp: 00:0b: ioport range 0x1180-0x11bf has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: c0100000-c01fffff
  PREFETCH window: e0000000-e7ffffff
PCI: Bus 3, cardbus bridge: 0000:02:00.0
  IO window: 00004000-000040ff
  IO window: 00004400-000044ff
  PREFETCH window: e8000000-e9ffffff
  MEM window: c2000000-c3ffffff
PCI: Bus 7, cardbus bridge: 0000:02:00.1
  IO window: 00004800-000048ff
  IO window: 00004c00-00004cff
  PREFETCH window: ea000000-ebffffff
  MEM window: c4000000-c5ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-8fff
  MEM window: c0200000-cfffffff
  PREFETCH window: e8000000-f00fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Found IRQ 11 for device 0000:02:00.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: setting IRQ 5 as level-triggered
PCI: Found IRQ 5 for device 0000:02:00.1
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:00:1f.6
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1178197099.436:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, using 15000k, total 32768k
vesafb: mode is 1600x1200x16, linelength=3200, pages=7
vesafb: protected mode interface info at c000:5331
vesafb: pmi: set display start = c00c53c5, set palette = c00c5411
vesafb: pmi: ports = 3010 3016 3054 3038 303c 305c 3000 3004 30b0 30b2 30b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 231472 bytes,<6>...found (1600x1200, 33952 bytes, v3).
Console: switching to colour frame buffer device 200x72
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
00:13: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
PCI: Found IRQ 5 for device 0000:00:1f.6
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:02:00.1
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
Freeing unused kernel memory: 192k freed
Time: tsc clocksource has been installed.
Executing init=/init
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
PCI: Found IRQ 11 for device 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N030ATMR04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: max request size: 128KiB
hda: 58605120 sectors (30005 MB) w/1740KiB Cache, CHS=62016/15/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdc: TOSHIBA DVD-ROM SD-C2302, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
PCI: Unable to reserve mem region #1:8000000@e0000000 for device 0000:01:00.0
PCI: Found IRQ 11 for device 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:02:00.0
[drm] Initialized radeon 1.25.0 20060524 on minor 0: 
[drm] Used old pci detect: framebuffer loaded
NET: Registered protocol family 23
IrCOMM protocol (Dag Brattli)
speedstep: frequency transition measured seems out of range (4800 nSec), falling back to a safe one of 500000 nSec.
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: Found IRQ 11 for device 0000:00:1d.0
PCI: Sharing IRQ 11 with 0000:01:00.0
PCI: Sharing IRQ 11 with 0000:02:00.0
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: Found IRQ 11 for device 0000:00:1d.1
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
input: PC Speaker as /class/input/input1
PCI: Found IRQ 11 for device 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:02:02.0
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ieee80211_crypt: registered algorithm 'NULL'
PCI: Found IRQ 5 for device 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:00:1f.6
PCI: Sharing IRQ 5 with 0000:02:00.1
Yenta: CardBus bridge found at 0000:02:00.0 [1014:0184]
usb 2-1: new low speed USB device using uhci_hcd and address 2
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xf00fffff
Yenta: CardBus bridge found at 0000:02:00.1 [1014:0184]
ieee1394: Initialized config rom entry `ip1394'
usb 2-1: configuration #1 chosen from 1 choice
Yenta: ISA IRQ mask 0x0498, PCI irq 5
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xf00fffff
Real Time Clock Driver v1.12ac
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:02:08.0
e100: eth0: e100_probe: addr 0xc0200000, irq 9, MAC addr 00:D0:59:A9:1C:A6
PCI: Found IRQ 11 for device 0000:02:00.2
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:02.0
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[c0201000-c02017ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
PCI: Found IRQ 11 for device 0000:02:02.0
PCI: Sharing IRQ 11 with 0000:00:1d.2
PCI: Sharing IRQ 11 with 0000:00:1f.1
PCI: Sharing IRQ 11 with 0000:02:00.2
hostap_pci: Registered netdevice wifi0
wifi0: Original COR value: 0x0
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input2
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3f8
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
nsc_ircc_open(), can't get iobase of 0x3f8
pnp: Device 00:14 disabled.
prism2_hw_init: initialized in 324 ms
wifi0: NIC: id=0x8013 v1.0.0
wifi0: PRI: id=0x15 v1.0.5
wifi0: STA: id=0x1f v1.3.3
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000000000000000]
wifi0: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS
wifi0: Intersil Prism2.5 PCI: mem=0xf0000000, irq=11
wifi0: registered netdevice wlan0
usbcore: registered new driver hiddev
PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
PCI: Found IRQ 5 for device 0000:00:1f.5
PCI: Sharing IRQ 5 with 0000:00:1f.3
PCI: Sharing IRQ 5 with 0000:00:1f.6
PCI: Sharing IRQ 5 with 0000:02:00.1
PCI: Setting latency timer of device 0000:00:1f.5 to 64
input: Logitech USB Receiver as /class/input/input3
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ts: Compaq touchscreen protocol output
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
intel8x0_measure_ac97_clock: measured 428 usecs
intel8x0: measured clock 6228971 rejected
intel8x0: clocking to 48000
Adding 524936k swap on /dev/hda3.  Priority:-1 extents:1 across:524936k
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
XFS mounting filesystem hda6
Ending clean XFS mount for filesystem: hda6
subfs 0.9
TSC appears to be running slowly. Marking it as unstable
Time: pit clocksource has been installed.
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
NET: Registered protocol family 17
ttyS0: LSR safety check engaged!
QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
KQEMU installed, max_locked_mem=257900kB.
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x2000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x2000000
mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] writeback test succeeded in 1 usecs