Bootdata ok (command line is auto BOOT_IMAGE=2618-std-smp-6 ro root=802 panic=30) Linux version 2.6.18-std-smp-alt6 (builder@hint1.office.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Sun Apr 29 00:41:38 MSD 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f661000 (usable) BIOS-e820: 000000003f661000 - 000000003f6e8000 (ACPI NVS) BIOS-e820: 000000003f6e8000 - 000000003f6ec000 (usable) BIOS-e820: 000000003f6ec000 - 000000003f6ff000 (ACPI data) BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable) DMI 2.3 present. ACPI: RSDP (v000 INTEL ) @ 0x00000000000fe020 ACPI: RSDT (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6fde48 ACPI: FADT (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6fcf10 ACPI: MADT (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6fce10 ACPI: WDDT (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6f6f90 ACPI: MCFG (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6f6f10 ACPI: ASF! (v032 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6fcd10 ACPI: HPET (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x000000003f6f6e90 ACPI: SSDT (v001 INTEL CpuPm 0x00000fec MSFT 0x01000013) @ 0x000000003f6fdc10 ACPI: SSDT (v001 INTEL Cpu0Ist 0x00000fec MSFT 0x01000013) @ 0x000000003f6fda10 ACPI: SSDT (v001 INTEL Cpu1Ist 0x00000fec MSFT 0x01000013) @ 0x000000003f6fd810 ACPI: SSDT (v001 INTEL Cpu2Ist 0x00000fec MSFT 0x01000013) @ 0x000000003f6fd610 ACPI: SSDT (v001 INTEL Cpu3Ist 0x00000fec MSFT 0x01000013) @ 0x000000003f6fd410 ACPI: SSDT (v001 INTEL SetupVar 0x00000fec MSFT 0x01000013) @ 0x000000003f6f6e10 ACPI: DSDT (v001 INTEL D945GTP 0x00000fec MSFT 0x01000013) @ 0x0000000000000000 No NUMA configuration found Faking a node at 0000000000000000-000000003f700000 Bootmem setup node 0 0000000000000000-000000003f700000 On node 0 totalpages: 254938 DMA zone: 2844 pages, LIFO batch:0 DMA32 zone: 252094 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to physical flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Nosave address range: 000000000009f000 - 00000000000a0000 Nosave address range: 00000000000a0000 - 00000000000e0000 Nosave address range: 00000000000e0000 - 0000000000100000 Nosave address range: 000000003f661000 - 000000003f6e8000 Nosave address range: 000000003f6ec000 - 000000003f6ff000 Allocating PCI resources starting at 40000000 (gap: 3f700000:c0900000) SMP: Allowing 4 CPUs, 2 hotplug CPUs Built 1 zonelists. Total pages: 254938 Kernel command line: auto BOOT_IMAGE=2618-std-smp-6 ro root=802 panic=30 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer. time.c: Detected 3200.137 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Checking aperture... Memory: 1017864k/1039360k available (1852k kernel code, 20492k reserved, 1202k data, 196k init) Calibrating delay using timer specific routine.. 6406.65 BogoMIPS (lpj=12813312) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 481k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist. Using local APIC timer interrupts. result 12500462 Detected 12.500 MHz APIC timer. SMP alternatives: switching to SMP code Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6399.87 BogoMIPS (lpj=12799754) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 0a Brought up 2 CPUs testing NMI watchdog ... OK. migration_cost=14 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:00:02.0 PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Firmware left 0000:04:01.0 e100 interrupts enabled, disabling PCI: Firmware left 0000:04:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz PCI-GART: No AMD northbridge found. pnp: 00:06: ioport range 0x500-0x53f has been reserved pnp: 00:06: ioport range 0x400-0x47f could not be reserved pnp: 00:06: ioport range 0x680-0x6ff has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: 50300000-503fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: 50400000-504fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: 50500000-505fffff PREFETCH window: disabled. PCI: Bridge: 0000:04:00.0 IO window: 1000-1fff MEM window: disabled. PREFETCH window: 50600000-506fffff PCI: Bridge: 0000:00:1e.0 IO window: 1000-2fff MEM window: 50000000-501fffff PREFETCH window: 50600000-506fffff GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 GSI 17 sharing vector 0xB1 and IRQ 17 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.2 to 64 GSI 18 sharing vector 0xB9 and IRQ 18 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1178299215.460:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] vesafb: framebuffer at 0x40000000, mapped to 0xffffc20000080000, using 3750k, total 7872k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device hpet_resources: 0xfed00000 is busy Linux agpgart interface v0.101 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 196k freed Executing init=/init Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 177 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x30b0-0x30b7, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... input: AT Translated Set 2 keyboard as /class/input/input0 hda: LITE-ON DVD SHD-16P1S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... SCSI subsystem initialized libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x30C8 ctl 0x30EE bmdma 0x30A0 irq 185 ata2: SATA max UDMA/133 cmd 0x30C0 ctl 0x30EA bmdma 0x30A8 irq 185 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x30C7 Vendor: ATA Model: ST380815AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 sda7 sda8 sda9 > sd 0:0:0:0: Attached scsi disk sda kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] usbcore: registered new driver usbfs usbcore: registered new driver hub Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 185 agpgart: Detected an Intel 945G Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0x40000000 sd 0:0:0:0: Attached scsi generic sg0 type 0 e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation GSI 19 sharing vector 0xE1 and IRQ 19 ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 22 (level, low) -> IRQ 225 e100: eth0: e100_probe: addr 0x50101000, irq 225, MAC addr 00:02:A5:4C:3E:CB GSI 20 sharing vector 0xE9 and IRQ 20 ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 20 (level, low) -> IRQ 233 e100: eth1: e100_probe: addr 0x50100000, irq 233, MAC addr 00:19:D1:12:14:41 sundance.c:v1.1 27-Jun-2006 Written by Donald Becker http://www.scyld.com/network/sundance.html GSI 21 sharing vector 0x32 and IRQ 21 ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 21 (level, low) -> IRQ 50 eth2: D-Link DFE-580TX 4 port Server Adapter at 0000000000011180, 00:00:00:00:00:00, IRQ 50. eth2: No MII transceiver found, aborting. ASIC status ffffffff GSI 22 sharing vector 0x3A and IRQ 22 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 58, io mem 0x502c4000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 hda: ATAPI 48X DVD-ROM drive, 1727kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 22 (level, low) -> IRQ 225 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 58, io base 0x00003080 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected eth2: D-Link DFE-580TX 4 port Server Adapter at 0000000000011100, 00:00:00:00:00:00, IRQ 225. eth2: No MII transceiver found, aborting. ASIC status ffffffff ACPI: PCI Interrupt 0000:00:1d.1[B] -> <6>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 58 GSI 19 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 185, io base 0x00003060 eth2: D-Link DFE-580TX 4 port Server Adapter at 0000000000011080, 00:05:5d:7d:2f:7a, IRQ 58. usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected eth2: MII PHY found at address 1, status 0x7809 advertising 01e1. ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 177, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected GSI 23 sharing vector 0x42 and IRQ 23 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 66, io base 0x00003020 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 233 eth3: D-Link DFE-580TX 4 port Server Adapter at 0000000000011000, 00:05:5d:7d:2f:7b, IRQ 233. eth3: MII PHY found at address 1, status 0x7809 advertising 01e1. EXT3 FS on sda2, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sda7 Ending clean XFS mount for filesystem: sda7