Attachment 1943 Details for Bug 11687 – dmesg. С30/2.6.18-std-smp-alt3/старый компьютер

dmesg. С30/2.6.18-std-smp-alt3/старый компьютер

dmesg (text/plain), 9.64 KB, created by Sergey Y. Afonin on 2007-05-04 18:49:48 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Sergey Y. Afonin

Created: 2007-05-04 18:49:48 MSD

Size: 9.64 KB

patch

obsolete

>Linux version 2.6.18-std-smp-alt3 (asy@gw03.kraft-s.net) (gcc version 3.4.4 20050526 (ALT Linux, build 3.4.4-alt1)) #1 SMP Thu Jan 18 13:09:41 SAMT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
> BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
> BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>127MB LOWMEM available.
>found SMP MP-table at 000f4c00
>On node 0 totalpages: 32752
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 28656 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f6690
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3000
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff3040
>ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x07ff6800
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 17
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 10000000 (gap: 08000000:f6c00000)
>Detected 851.975 MHz processor.
>Built 1 zonelists.  Total pages: 32752
>Kernel command line: auto BOOT_IMAGE=2618-std-smp-3 ro root=302
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 512 (order: 9, 2048 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>Memory: 125832k/131008k available (1552k kernel code, 4644k reserved, 623k data, 192k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1705.32 BogoMIPS (lpj=3410640)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 226k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: Intel Celeron (Coppermine) stepping 0a
>Total of 1 processors activated (1705.32 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 4080-40bf claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:01.0 e100 interrupts enabled, disabling
>PCI: Firmware left 0000:02:04.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dc000000-ddffffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:02:03.0
>  IO window: 9000-9fff
>  MEM window: df000000-dfffffff
>  PREFETCH window: de100000-de1fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: de000000-e0ffffff
>  PREFETCH window: e1000000-e10fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
>TCP established hash table entries: 4096 (order: 3, 32768 bytes)
>TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
>TCP: Hash tables configured (established 4096 bind 2048)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1178307003.540:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: framebuffer at 0xd0000000, mapped to 0xc8880000, using 3072k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=0
>vesafb: protected mode interface info at c000:c200
>vesafb: pmi: set display start = c00cc245, set palette = c00cc2ca
>vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: tsc clocksource has been installed.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2: IDE controller at PCI slot 0000:00:1f.1
>ICH2: chipset revision 17
>ICH2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
>Probing IDE interface ide0...
>hda: ST340014A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdd: SAMSUNG SV1021H, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda4 < hda5 hda6 hda7 hda8 >
>hdd: max request size: 128KiB
>hdd: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=19774/16/63, UDMA(100)
>hdd: cache flushes not supported
> hdd: hdd1
> hdd1: <bsd: hdd5 hdd6 hdd7 hdd8 >
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... /initrd does not exist. Ignored.
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 192k freed
>Executing init=/sbin/init
>Adding 1020088k swap on /dev/hda7.  Priority:-1 extents:1 across:1020088k
>EXT3 FS on hda2, internal journal
>Real Time Clock Driver v1.12ac
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 11687: 1940 | 1941 | 1942 | 1943 | 1944