Attachment 2626 Details for Bug 14497 – dmesg c ядром std-def с учетом ifup eth0

dmesg c ядром std-def с учетом ifup eth0

dmesg.txt (text/plain), 16.21 KB, created by Владимир Гусев on 2008-05-14 16:22:41 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Владимир Гусев

Created: 2008-05-14 16:22:41 MSD

Size: 16.21 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Linux version 2.6.24-std-def-alt8 (builder@apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP Mon Apr 28 15:47:17 MSD 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable)
> BIOS-e820: 000000000ffe0000 - 000000000ffefc00 (ACPI data)
> BIOS-e820: 000000000ffefc00 - 000000000fff0000 (ACPI NVS)
> BIOS-e820: 000000000fff0000 - 000000000fff2000 (reserved)
> BIOS-e820: 000000000fff2000 - 0000000010000000 (usable)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>256MB LOWMEM available.
>Entering add_active_range(0, 0, 65536) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    65536
>  HighMem     65536 ->    65536
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->    65536
>On node 0 totalpages: 65536
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 480 pages used for memmap
>  Normal zone: 60960 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>  Movable zone: 0 pages used for memmap
>DMI 2.3 present.
>ACPI: RSDP 000F6490, 0014 (r0 FUJ   )
>ACPI: RSDT 0FFEC6E3, 0028 (r1 FUJ    QUILT     1560000 FUJ      1000)
>ACPI: FACP 0FFEFB8C, 0074 (r1 FUJ    QUILT     1560000 FUJ      1000)
>ACPI: DSDT 0FFEC70B, 3481 (r1 FUJ    QUILT     1560000 MSFT  1000007)
>ACPI: FACS 0FFEFFC0, 0040
>ACPI: PM-Timer IO Port: 0xff08
>Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
>swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
>swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
>swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
>swsusp: Registered nosave memory region: 000000000ffe0000 - 000000000ffef000
>swsusp: Registered nosave memory region: 000000000ffef000 - 000000000fff0000
>swsusp: Registered nosave memory region: 000000000fff0000 - 000000000fff2000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024
>Kernel command line: auto BOOT_IMAGE=2624-std-def-8 ro root=305 resume=/dev/hda1 panic=30 splash=silent
>bootsplash: silent mode.
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffb000 (0120c000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Detected 597.086 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 254872k/262144k available (2173k kernel code, 6756k reserved, 772k data, 312k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe13000 - 0xfffff000   (1968 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
>      .init : 0xc03e7000 - 0xc0435000   ( 312 kB)
>      .data : 0xc031f790 - 0xc03e0a44   ( 772 kB)
>      .text : 0xc0100000 - 0xc031f790   (2173 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1195.47 BogoMIPS (lpj=2390949)
>Security Framework initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 128K
>CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 11k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 8200)
>CPU0: Intel Celeron (Coppermine) stepping 0a
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 00000001
>  groups: 00000001
>net_namespace: 64 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd9ce, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: EC: GPE = 0x2c, I/O: command/status = 0x66, data = 0x62
>ACPI: EC: driver started in poll mode
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region ff00-ff3f claimed by PIIX4 ACPI
>PCI quirk: region ff80-ff8f claimed by PIIX4 SMB
>PIIX4 devres C PIO at fd60-fd67
>PIIX4 devres G PIO at 0118-011f
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *15)
>ACPI: Power Resource [USBP] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>system 00:01: ioport range 0x4d0-0x4d1 has been reserved
>system 00:01: ioport range 0xff00-0xff3f has been reserved
>system 00:01: ioport range 0xf800-0xf87f has been reserved
>system 00:01: ioport range 0xfd60-0xfd67 has been reserved
>system 00:01: ioport range 0xfe00-0xfe00 has been reserved
>system 00:01: ioport range 0xff80-0xff8f has been reserved
>PCI: Bus 1, cardbus bridge: 0000:00:13.0
>  IO window: 00001c00-00001cff
>  IO window: 00002000-000020ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>PCI: Bus 5, cardbus bridge: 0000:00:13.1
>  IO window: 00002400-000024ff
>  IO window: 00002800-000028ff
>  PREFETCH window: 28000000-2bffffff
>  MEM window: 2c000000-2fffffff
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 8192 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 625k freed
>audit: initializing netlink socket (disabled)
>audit(1210766314.464:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:00:14.0
>vesafb: framebuffer at 0xfd000000, mapped to 0xd0880000, using 3750k, total 4096k
>vesafb: mode is 800x600x16, linelength=1600, pages=3
>vesafb: protected mode interface info at c000:505c
>vesafb: pmi: set display start = c00c50c2, set palette = c00c511c
>vesafb: pmi: ports = 1485 141f 14b4 14b8 1418 1414 14c0 14c3 14c1 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>fbcon: VESA VGA (fb0) is primary device
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 107306 bytes
>bootsplash: ...found (800x600, 8288 bytes, v3).
>Console: switching to colour frame buffer device 97x34
>Switched to high resolution mode on CPU 0
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0f13:PS2M] at 0x0,0x0 irq 12
>PNP: PS/2 controller has invalid data port 0x0; using default 0x60
>PNP: PS/2 controller has invalid command port 0x0; using default 0x64
>PNP: PS/2 controller doesn't have KBD irq; using default 1
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 312k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller (0x8086:0x7199 rev 0x00) at  PCI slot 0000:00:07.1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
>PIIX4: IDE port disabled
>Probing IDE interface ide0...
>hda: IC25N020ATCS04-0, ATA DISK drive
>hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>hda: UDMA/33 mode selected
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63
>hda: cache flushes not supported
> hda: hda1 hda4 < hda5<7>Probing IDE interface ide1...
> hda6 hda7 hda8 >
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>libata version 3.00 loaded.
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>usbcore: registered new device driver usb
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>IBM TrackPoint firmware: 0x0b, buttons: 2/3
>input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input3
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
>PCI: setting IRQ 15 as level-triggered
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 15, io base 0x00001840
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10e6]
>Yenta O2: res at 0x94/0xD4: ea/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x08b8, PCI irq 9
>Socket status: 30000458
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>Yenta: CardBus bridge found at 0000:00:13.1 [10cf:10e6]
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
>Socket status: 30000006
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 2 ports detected
>pccard: PCMCIA card inserted into slot 0
>usb 1-2.1: new full speed USB device using uhci_hcd and address 4
>usb 1-2.1: configuration #1 chosen from 1 choice
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>parport_pc 00:0a: reported by Plug and Play ACPI
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>input: Power Button (FF) as /devices/virtual/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/virtual/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Lid Switch as /devices/virtual/input/input6
>ACPI: Lid Switch [LID]
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [CMB1] (battery present)
>NET: Registered protocol family 23
>found SMC SuperIO Chip (devid=0x28 rev=01 base=0x03f0): FDC37N769
>smsc_superio_flat(): fir: 0x118, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e
>smsc_ircc_present: can't get sir_base of 0x2e8
>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input7
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: PCI Interrupt 0000:00:00.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
>PCI: Setting latency timer of device 0000:00:00.1 to 64
>intel8x0_measure_ac97_clock: measured 55855 usecs
>intel8x0: clocking to 48000
>cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: memory probe 0xa0000000-0xa0ffffff: clean.
>pcmcia: registering new device pcmcia0.0
>cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>usbcore: registered new interface driver hiddev
>input: USB Mouse as /devices/pci0000:00/0000:00:07.2/usb1/1-1/1-1:1.0/input/input8
>input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:07.2-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>usbcore: registered new interface driver libusual
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>eth0: NE2000 (DL10022 rev 30): io 0x300, irq 5, hw_addr 00:40:05:8f:00:51
>Adding 787144k swap on /dev/hda1.  Priority:1 extents:1 across:787144k
>EXT3 FS on hda5, internal journal
>hda: UDMA/33 mode selected
>scsi 0:0:0:0: Direct-Access     IC25N040 ATMR04-0         MO2O PQ: 0 ANSI: 0
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
>sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
>sd 0:0:0:0: [sda] Assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: [sda] Attached SCSI disk
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=127940kB.
>Linux agpgart interface v0.102
>[drm] Initialized drm 1.1.0 20060810
>PCI: Unable to reserve mem region #1:1000000@fd000000 for device 0000:00:14.0
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
>[drm] Initialized mach64 2.0.0 20060718 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>[drm] descriptor ring: cpu addr cfb98000, bus addr: 0x0fb98000
>[drm] DMA test succeeded, using asynchronous DMA mode
>eth0: found link beat
>eth0: autonegotiation complete: 100baseT-FD selected
>NET: Registered protocol family 17

Actions: View

Attachments on bug 14497: 2616 | 2617 | 2618 | 2624 | 2625 | 2626