Linux version 2.6.18-ovz-smp-alt23.M40.1 (builder@apiary.rio.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt11)) #1 SMP Wed May 7 14:41:56 MSD 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003e413000 (usable) BIOS-e820: 000000003e413000 - 000000003e415000 (reserved) BIOS-e820: 000000003e415000 - 000000003e52a000 (usable) BIOS-e820: 000000003e52a000 - 000000003e5e5000 (ACPI NVS) BIOS-e820: 000000003e5e5000 - 000000003e5e8000 (usable) BIOS-e820: 000000003e5e8000 - 000000003e5f3000 (ACPI data) BIOS-e820: 000000003e5f3000 - 000000003e5f4000 (usable) BIOS-e820: 000000003e5f4000 - 000000003e5ff000 (ACPI data) BIOS-e820: 000000003e5ff000 - 000000003e600000 (usable) BIOS-e820: 000000003e600000 - 000000003f000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 102MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe200 Using x86 segment limits to approximate NX protection On node 0 totalpages: 255488 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 26112 pages, LIFO batch:7 DMI 2.4 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: APIC at: 0xFEE00000 Processor #0 6:15 APIC version 20 Enabling APIC mode: Flat. Using 0 I/O APICs BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor) Processors: 1 Allocating PCI resources starting at 40000000 (gap: 3f000000:b1000000) Detected 2200.187 MHz processor. Built 1 zonelists. Total pages: 255488 Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=900 nolapic noapic acpi=off panic=30 mapped APIC to ffffd000 (fee00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1006936k/1021952k available (1644k kernel code, 13576k reserved, 669k data, 200k init, 103604k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4403.54 BogoMIPS (lpj=8807099) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebf3ff 20100000 00000000 00000940 0000e39d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 16k freed Page beancounter hash is 65536 entries. checking if image is initramfs... it is Freeing initrd memory: 401k freed CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz stepping 0d Total of 1 processors activated (4403.54 BogoMIPS). Brought up 1 CPUs migration_cost=0 NET: Registered protocol family 16 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fe0e0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb081, dseg 0x400 PnPBIOS: 2 nodes reported by PnP BIOS; 2 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2912] at 0000:00:1f.0 PCI: setting IRQ 9 as level-triggered PCI: Found IRQ 9 for device 0000:00:1c.0 PCI: Sharing IRQ 9 with 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:00:1a.7 PCI: Sharing IRQ 9 with 0000:00:1c.4 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Found IRQ 9 for device 0000:00:1c.1 PCI: Sharing IRQ 9 with 0000:00:19.0 PCI: setting IRQ 10 as level-triggered PCI: Found IRQ 10 for device 0000:00:1c.2 PCI: Sharing IRQ 10 with 0000:00:1a.0 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: setting IRQ 11 as level-triggered PCI: Found IRQ 11 for device 0000:00:1c.3 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 1000-1fff MEM window: 50000000-500fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Found IRQ 9 for device 0000:00:1c.0 PCI: Sharing IRQ 9 with 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:00:1a.7 PCI: Sharing IRQ 9 with 0000:00:1c.4 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Found IRQ 9 for device 0000:00:1c.1 PCI: Sharing IRQ 9 with 0000:00:19.0 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Found IRQ 10 for device 0000:00:1c.2 PCI: Sharing IRQ 10 with 0000:00:1a.0 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1c.2 to 64 PCI: Found IRQ 11 for device 0000:00:1c.3 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Found IRQ 9 for device 0000:00:1c.4 PCI: Sharing IRQ 9 with 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:00:1a.7 PCI: Sharing IRQ 9 with 0000:00:1c.0 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Setting latency timer of device 0000:00:1c.4 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1213693953.396:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered NET: Registered protocol family 1 Using IPI Shortcut mode Freeing unused kernel memory: 200k freed Executing init=/init Time: tsc clocksource has been installed. SCSI subsystem initialized libata version 2.00 loaded. ahci 0000:00:1f.2: version 2.0 PCI: Found IRQ 11 for device 0000:00:1f.2 PCI: Sharing IRQ 11 with 0000:00:1a.1 input: AT Translated Set 2 keyboard as /class/input/input0 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp pio slum part ata1: SATA max UDMA/133 cmd 0xF8890100 ctl 0x0 bmdma 0x0 irq 105 ata2: SATA max UDMA/133 cmd 0xF8890180 ctl 0x0 bmdma 0x0 irq 105 ata3: SATA max UDMA/133 cmd 0xF8890200 ctl 0x0 bmdma 0x0 irq 105 ata4: SATA max UDMA/133 cmd 0xF8890280 ctl 0x0 bmdma 0x0 irq 105 ata5: SATA max UDMA/133 cmd 0xF8890300 ctl 0x0 bmdma 0x0 irq 105 ata6: SATA max UDMA/133 cmd 0xF8890380 ctl 0x0 bmdma 0x0 irq 105 scsi0 : ahci ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi1 : ahci ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 scsi2 : ahci ata3: SATA link down (SStatus 0 SControl 300) scsi3 : ahci ata4: SATA link down (SStatus 0 SControl 300) scsi4 : ahci ata5: SATA link down (SStatus 0 SControl 300) scsi5 : ahci ata6: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: ST3250820NS Rev: 3.AE Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: Attached scsi disk sda Vendor: ATA Model: ST3250820NS Rev: 3.AE Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 sdb7 > sd 1:0:0:0: Attached scsi disk sdb PCI: Found IRQ 9 for device 0000:02:00.0 PCI: Sharing IRQ 9 with 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:00:1a.7 PCI: Setting latency timer of device 0000:02:00.0 to 64 ata7: PATA max UDMA/100 cmd 0x1018 ctl 0x1026 bmdma 0x1000 irq 9 scsi6 : pata_marvell BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 ATA: abnormal status 0x8 on port 0x101F md: raid1 personality registered for level 1 md: Autodetecting RAID arrays. md: autorun ... md: considering sdb7 ... md: adding sdb7 ... md: sdb6 has different UUID to sdb7 md: sdb5 has different UUID to sdb7 md: sdb1 has different UUID to sdb7 md: adding sda7 ... md: sda6 has different UUID to sdb7 md: sda5 has different UUID to sdb7 md: sda1 has different UUID to sdb7 md: created md3 md: bind md: bind md: running: raid1: raid set md3 active with 2 out of 2 mirrors md: considering sdb6 ... md: adding sdb6 ... md: sdb5 has different UUID to sdb6 md: sdb1 has different UUID to sdb6 md: adding sda6 ... md: sda5 has different UUID to sdb6 md: sda1 has different UUID to sdb6 md: created md2 md: bind md: bind md: running: raid1: raid set md2 active with 2 out of 2 mirrors md: considering sdb5 ... md: adding sdb5 ... md: sdb1 has different UUID to sdb5 md: adding sda5 ... md: sda1 has different UUID to sdb5 md: created md1 md: bind md: bind md: running: raid1: raid set md1 active with 2 out of 2 mirrors md: considering sdb1 ... md: adding sdb1 ... md: adding sda1 ... md: created md0 md: bind md: bind md: running: raid1: raid set md0 active with 2 out of 2 mirrors md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0 e1000e: Copyright (c) 1999-2007 Intel Corporation. PCI: Found IRQ 9 for device 0000:00:19.0 PCI: Setting latency timer of device 0000:00:19.0 to 64 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 Linux agpgart interface v0.102 (c) Dave Jones 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:2f:cb:7d 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff PCI: Found IRQ 9 for device 0000:00:1a.7 PCI: Sharing IRQ 9 with 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 9, io mem 0x502a1c00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected input: PC Speaker as /class/input/input1 PCI: Found IRQ 10 for device 0000:00:1d.7 PCI: Sharing IRQ 10 with 0000:00:1d.0 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 10, io mem 0x502a1800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected PCI: Found IRQ 10 for device 0000:00:1f.3 PCI: Sharing IRQ 10 with 0000:00:1a.0 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Found IRQ 10 for device 0000:00:1a.0 PCI: Sharing IRQ 10 with 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 10, io base 0x000020e0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1a.1 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 11, io base 0x000020c0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1a.2 PCI: Sharing IRQ 9 with 0000:00:1a.7 PCI: Sharing IRQ 9 with 0000:02:00.0 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 9, io base 0x000020a0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.0 PCI: Sharing IRQ 10 with 0000:00:1d.7 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00002080 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.2 PCI: Sharing IRQ 10 with 0000:00:1a.0 PCI: Sharing IRQ 10 with 0000:00:1f.3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 10, io base 0x00002040 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected agpgart: Detected an Intel G33 Chipset. agpgart: Detected 7164K stolen memory. agpgart: AGP aperture is 256M @ 0x40000000 Real Time Clock Driver v1.12ac Adding 522104k swap on /dev/sda2. Priority:-1 extents:1 across:522104k Adding 522104k swap on /dev/sdb2. Priority:-2 extents:1 across:522104k EXT3 FS on md0, internal journal device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "md1": Disabling barriers, not supported by the underlying device XFS mounting filesystem md1 Ending clean XFS mount for filesystem: md1 Filesystem "md2": Disabling barriers, not supported by the underlying device XFS mounting filesystem md2 Ending clean XFS mount for filesystem: md2 Filesystem "md3": Disabling barriers, not supported by the underlying device XFS mounting filesystem md3 Ending clean XFS mount for filesystem: md3