Attachment 2713 Details for Bug 16422 – dmesg kernel-image-std-smp-2.6.18-alt10.x86_64

dmesg kernel-image-std-smp-2.6.18-alt10.x86_64

dmesg.18 (text/plain), 15.51 KB, created by solo on 2008-07-23 13:03:47 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: solo

Created: 2008-07-23 13:03:47 MSD

Size: 15.51 KB

patch

obsolete

>Bootdata ok (command line is BOOT_IMAGE=2618-std-smp-10 ro root=305 panic=30)
>Linux version 2.6.18-std-smp-alt10 (builder@apiary.armor.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Wed Dec 12 23:42:12 MSK 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077fd0000 (usable)
> BIOS-e820: 0000000077fd0000 - 0000000077fde000 (ACPI data)
> BIOS-e820: 0000000077fde000 - 0000000078000000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v000 M S I                                 ) @ 0x00000000000f9ab0
>ACPI: RSDT (v001 M S I  1058     0x04162004 MSFT 0x00000097) @ 0x0000000077fd0000
>ACPI: FADT (v002 M S I  1058     0x04162004 MSFT 0x00000097) @ 0x0000000077fd0200
>ACPI: MADT (v001 M S I  OEMAPIC  0x04162004 MSFT 0x00000097) @ 0x0000000077fd0390
>ACPI: MCFG (v001 M S I  OEMMCFG  0x04162004 MSFT 0x00000097) @ 0x0000000077fd03f0
>ACPI: OEMB (v001 M S I  AMI_OEM  0x04162004 MSFT 0x00000097) @ 0x0000000077fde040
>ACPI: DSDT (v001 M S I  1058     0x04162004 INTL 0x02002026) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 0000000077fd0000
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-0000000077fd0000
>On node 0 totalpages: 483580
>  DMA zone: 2867 pages, LIFO batch:0
>  DMA32 zone: 480713 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:8 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 78000000:87f80000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 483580
>Kernel command line: BOOT_IMAGE=2618-std-smp-10 ro root=305 panic=30
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 1596.054 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ d442000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 1931056k/1965888k available (1859k kernel code, 34444k reserved, 1212k data, 196k init)
>Calibrating delay using timer specific routine.. 3196.10 BogoMIPS (lpj=6392218)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>checking if image is initramfs... it is
>Freeing initrd memory: 358k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>Using local APIC timer interrupts.
>result 12469185
>Detected 12.469 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3192.32 BogoMIPS (lpj=6384648)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 484 cycles)
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>migration_cost=138
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
>ACPI: Embedded Controller [EC] (gpe 6) interrupt mode.
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: ff300000-ff3fffff
>  PREFETCH window: cdf00000-ddefffff
>PCI: Bridge: 0000:00:06.0
>  IO window: a000-afff
>  MEM window: ff400000-ffbfffff
>  PREFETCH window: ddf00000-dfefffff
>PCI: Bridge: 0000:00:07.0
>  IO window: b000-bfff
>  MEM window: ffc00000-ffcfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: disabled.
>  MEM window: ffd00000-ffdfffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1216796128.620:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. pci_msi_quirk set.
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>assign_interrupt_mode Found MSI capability
>PCI: MSI quirk detected. MSI disabled.
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000080000, using 3750k, total 16384k
>vesafb: mode is 800x600x16, linelength=1600, pages=16
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>Real Time Clock Driver v1.12ac
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Executing init=/init
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>GSI 16 sharing vector 0xB1 and IRQ 16
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 177
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD1600BEVE-00UYT0, ATA DISK drive
>input: AT Translated Set 2 keyboard as /class/input/input0
>hdb: HL-DT-ST DVDRAM GMA-4082N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda4 < hda5 hda6 >
>Probing IDE interface ide1...
>ReiserFS: hda5: found reiserfs format "3.6" with standard journal
>ReiserFS: hda5: using ordered data mode
>ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda5: checking transaction log (hda5)
>ReiserFS: hda5: Using r5 hash to sort names
>Losing some ticks... checking if CPU frequency changed.
>ACPI: duty_cycle spans bit 4
>powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID0]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Thermal Zone [THRM] (54 C)
>hdb: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>GSI 17 sharing vector 0xB9 and IRQ 17
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 185, io mem 0xffeff000
>input: PC Speaker as /class/input/input1
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 185
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 185, io mem 0xffefe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 185
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 185, io mem 0xffefd000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc20000040000, 00:dc:dc:8f:aa:ab, XID 30000000 IRQ 185
>ieee1394: Initialized config rom entry `ip1394'
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 177
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 1765 MBytes.
>[fglrx] USWC is disabled in module parameters
>[fglrx] PAT is disabled!
>[fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x116eb1, caps: 0xa04713/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>psmouse.c: TouchPad at isa0060/serio2/input0 lost sync at byte 1
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>ts: Compaq touchscreen protocol output
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>sdhci: SDHCI controller found at 0000:05:04.2 [1217:7120] (rev 1)
>GSI 18 sharing vector 0xC1 and IRQ 18
>ACPI: PCI Interrupt 0000:05:04.2[A] -> GSI 20 (level, low) -> IRQ 193
>sdhci:slot0: Unknown controller version (16). You may experience problems.
>sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
>mmc0: SDHCI at 0xffdfe400 irq 193 PIO
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 20 (level, low) -> IRQ 193
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193]  MMIO=[ffdff000-ffdff7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00dc1000b036ec00]
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>ReiserFS: dm-5: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-5: using ordered data mode
>ReiserFS: dm-5: journal params: device dm-5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-5: checking transaction log (dm-5)
>ReiserFS: dm-5: Using r5 hash to sort names
>ReiserFS: dm-8: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-8: using ordered data mode
>ReiserFS: dm-8: journal params: device dm-8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-8: checking transaction log (dm-8)
>ReiserFS: dm-8: Using r5 hash to sort names
>ReiserFS: dm-9: found reiserfs format "3.6" with standard journal
>ReiserFS: dm-9: using ordered data mode
>ReiserFS: dm-9: journal params: device dm-9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: dm-9: checking transaction log (dm-9)
>ReiserFS: dm-9: Using r5 hash to sort names
>JFS: nTxBlock = 8192, nTxLock = 65536
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 4194296k swap on /dev/evms/lvm2/notesol/swap.  Priority:-1 extents:1 across:4194296k
>r8169: eth0: link down
>ACPI: AC Adapter [ADP1] (off-line)
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=965804kB.
>psmouse.c: TouchPad at isa0060/serio2/input0 - driver resynched.
>r8169: eth0: link up
>NET: Registered protocol family 17
>atkbd.c: Unknown key pressed (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e071 <keycode>' to make it known.

Actions: View

Attachments on bug 16422: 2713 | 2714 | 2715 | 2716 | 2717 | 2718 | 2719 | 2720 | 2721 | 2722 | 2723 | 2724 | 2725 | 2726