Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25-std-def-alt10 (builder@apiary.egro.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt3)) #1 SMP Sat Oct 11 09:47:35 UTC 2008 Command line: auto BOOT_IMAGE=2625-std-def-10 ro root=821 resume=/dev/sda2 panic=30 splash=silent BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable) BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data) BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524240) 1 entries of 3200 used end_pfn_map = 1048576 ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:254 generic_get_mtrr+0xf9/0x100() Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.25-std-def-alt10 #1 Call Trace: [] warn_on_slowpath+0x5f/0x80 [] ? printk+0x67/0x70 [] ? printk+0x67/0x70 [] ? printk+0x67/0x70 [] generic_get_mtrr+0xf9/0x100 [] mtrr_trim_uncached_memory+0xab/0x1f0 [] ? get_mtrr_state+0x28f/0x2a0 [] setup_arch+0x387/0x6c0 [] ? raw_notifier_chain_register+0x9/0x10 [] start_kernel+0x65/0x340 [] _sinittext+0x1c1/0x210 ---[ end trace ca143223eefdc828 ]--- ------------[ cut here ]------------ WARNING: at arch/x86/kernel/cpu/mtrr/generic.c:254 generic_get_mtrr+0xf9/0x100() Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.25-std-def-alt10 #1 Call Trace: [] warn_on_slowpath+0x5f/0x80 [] ? printk+0x67/0x70 [] ? printk+0x67/0x70 [] ? printk+0x67/0x70 [] generic_get_mtrr+0xf9/0x100 [] mtrr_trim_uncached_memory+0xab/0x1f0 [] ? get_mtrr_state+0x28f/0x2a0 [] setup_arch+0x387/0x6c0 [] ? raw_notifier_chain_register+0x9/0x10 [] start_kernel+0x65/0x340 [] _sinittext+0x1c1/0x210 ---[ end trace ca143223eefdc828 ]--- DMI present. ACPI: RSDP 000F9480, 0014 (r0 ACPIAM) ACPI: RSDT 7FFD0000, 0034 (r1 A M I OEMRSDT 10000620 MSFT 97) ACPI: FACP 7FFD0200, 0084 (r2 A M I OEMFACP 10000620 MSFT 97) ACPI: DSDT 7FFD0440, 50F7 (r1 1ADGH 1ADGH000 0 INTL 2002026) ACPI: FACS 7FFDE000, 0040 ACPI: APIC 7FFD0390, 0070 (r1 A M I OEMAPIC 10000620 MSFT 97) ACPI: MCFG 7FFD0400, 003C (r1 A M I OEMMCFG 10000620 MSFT 97) ACPI: OEMB 7FFDE040, 005B (r1 A M I AMI_OEM 10000620 MSFT 97) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000007ffd0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 524240) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000007ffd0000 NODE_DATA [000000000000c000 - 0000000000013fff] bootmap [0000000000014000 - 0000000000023fff] pages 10 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-77cb6b] TEXT DATA BSS early res: 3 [e4e000-eff60d] RAMDISK early res: 4 [9fc00-a0bff] EBDA early res: 5 [8000-bfff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 524240 On node 0 totalpages: 524143 DMA zone: 56 pages used for memmap DMA zone: 1768 pages reserved DMA zone: 2175 pages, LIFO batch:0 DMA32 zone: 7111 pages used for memmap DMA32 zone: 513033 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Movable zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x2008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) ACPI: IRQ9 used by override. ACPI: IRQ14 used by override. ACPI: IRQ15 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) SMP: Allowing 2 CPUs, 0 hotplug CPUs PERCPU: Allocating 42544 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 515208 Policy zone: DMA32 Kernel command line: auto BOOT_IMAGE=2625-std-def-10 ro root=821 resume=/dev/sda2 panic=30 splash=silent bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC calibrated against PM_TIMER Marking TSC unstable due to TSCs unsynchronized time.c: Detected 2211.335 MHz processor. spurious 8259A interrupt: IRQ7. Console: colour dummy device 80x25 console [tty0] enabled Checking aperture... Node 0: aperture @ 76c000000 size 32 MB Aperture beyond 4GB. Ignoring. No AGP bridge found Memory: 2061240k/2096960k available (2695k kernel code, 35332k reserved, 1373k data, 400k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay using timer specific routine.. 4426.57 BogoMIPS (lpj=8853145) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12564402 Detected 12.564 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4422.70 BogoMIPS (lpj=8845419) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02 Brought up 2 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=6272 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000001 00000000,00000002 domain 1: span 00000000,00000003 groups: 00000000,00000003 CPU1 attaching sched-domain: domain 0: span 00000000,00000003 groups: 00000000,00000002 00000000,00000001 domain 1: span 00000000,00000003 groups: 00000000,00000003 net_namespace: 1016 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Error attaching device data ACPI: Error attaching device data ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:06.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15 ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10 ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 73, should be 68 [20070126] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. ACPI: RTC can wake from S4 system 00:08: ioport range 0x4d0-0x4d1 has been reserved system 00:08: ioport range 0x800-0x80f has been reserved system 00:08: ioport range 0x2000-0x207f has been reserved system 00:08: ioport range 0x2080-0x20ff has been reserved system 00:08: ioport range 0x2400-0x247f has been reserved system 00:08: ioport range 0x2480-0x24ff has been reserved system 00:08: ioport range 0x2800-0x287f has been reserved system 00:08: ioport range 0x2880-0x28ff has been reserved system 00:08: ioport range 0x2c00-0x2c7f has been reserved system 00:08: ioport range 0x2c80-0x2cff has been reserved system 00:08: iomem range 0xfbe80000-0xfbebffff has been reserved system 00:08: iomem range 0xfee01000-0xfeefffff has been reserved system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0c: ioport range 0xa00-0xa0f has been reserved system 00:0c: ioport range 0xa10-0xa1f has been reserved system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved system 00:0e: iomem range 0x0-0x9ffff could not be reserved system 00:0e: iomem range 0xc0000-0xcffff has been reserved system 00:0e: iomem range 0xe0000-0xfffff could not be reserved system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: 0xfbf00000-0xfbffffff PREFETCH window: 0x00000000cff00000-0x00000000cfffffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:0f.0 IO window: e000-efff MEM window: 0xfc000000-0xfebfffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 PCI: Setting latency timer of device 0000:00:0f.0 to 64 NET: Registered protocol family 2 Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 709k freed audit: initializing netlink socket (disabled) type=2000 audit(1226188234.396:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:05.1: Enabling HT MSI Mapping pci 0000:00:06.0: Enabling HT MSI Mapping pci 0000:00:06.1: Enabling HT MSI Mapping pci 0000:00:08.0: Enabling HT MSI Mapping pci 0000:00:0b.0: Enabling HT MSI Mapping pci 0000:00:0c.0: Enabling HT MSI Mapping pci 0000:00:0d.0: Enabling HT MSI Mapping pci 0000:00:0e.0: Enabling HT MSI Mapping pci 0000:00:0f.0: Enabling HT MSI Mapping pci 0000:06:00.0: Boot video device PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] PCI: Setting latency timer of device 0000:00:0f.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0f.0:pcie00] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20000900000, using 3750k, total 262144k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture... bootsplash: silentjpeg size 133202 bytes bootsplash: ...found (800x600, 12886 bytes, v3). Console: switching to colour frame buffer device 97x34 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12ac Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Driver for HIFN 795x crypto accelerator chip has been successfully registered. TCP bic registered NET: Registered protocol family 1 registered taskstats version 1 Freeing unused kernel memory: 400k freed Executing init=/init input: AT Translated Set 2 keyboard as /class/input/input1 No dock devices found. SCSI subsystem initialized libata version 3.00 loaded. sata_nv 0000:00:05.0: version 3.5 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:05.0 to 64 scsi0 : sata_nv scsi1 : sata_nv ata1: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23 ata2: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-7: Hitachi HDT725040VLA360, V5COA52A, max UDMA/133 ata1.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133 ata2.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32) ata2.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5 pata_amd 0000:00:04.0: version 0.3.10 PCI: Setting latency timer of device 0000:00:04.0 to 64 scsi2 : pata_amd scsi3 : pata_amd ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 ata4: port disabled. ignoring. ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:05.1 to 64 scsi4 : sata_nv scsi5 : sata_nv ata5: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 22 ata6: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 22 ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5.00: ATA-6: ST3160827AS, 3.42, max UDMA/133 ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) ata5.00: configured for UDMA/133 ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66 ata6.00: configured for UDMA/66 scsi 4:0:0:0: Direct-Access ATA ST3160827AS 3.42 PQ: 0 ANSI: 5 scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7173S 1-00 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 < sdb5 > sd 1:0:0:0: [sdb] Attached SCSI disk sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB) sd 4:0:0:0: [sdc] Write Protect is off sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 > sd 4:0:0:0: [sdc] Attached SCSI disk PM: Starting manual resume from disk kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 input: Power Button (FF) as /class/input/input2 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input3 ACPI: Power Button (CM) [PWRB] sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 4:0:0:0: Attached scsi generic sg2 type 0 scsi 5:0:0:0: Attached scsi generic sg3 type 5 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:08.0 to 64 Driver 'sr' needs updating - please use bus_type methods ath_hal: module license 'Proprietary' taints kernel. sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:0: Attached scsi CD-ROM sr0 ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.9.4 ath_pci: 0.9.4 input: PC Speaker as /class/input/input4 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux video capture interface: v2.00 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture NET: Registered protocol family 23 forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:ed:71:32 forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 20, io mem 0xfbefac00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23 ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:06.1 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 ACPI: PCI Interrupt 0000:01:00.1[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 bt87x0: Using board 5, analog, digital (rate 48000 Hz) bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19 bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 19, latency: 64, mmio: 0xcffff000 bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003 bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00fefff3 [init] bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes bttv0: tuner type=5 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tuner' 2-0061: chip found @ 0xc2 (bt878 #0 [sw]) hub 1-0:1.0: unable to enumerate USB device on port 5 tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok input: bttv IR (card=41) as /class/input/input5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:01.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:02.0: irq 22, io mem 0xfbefb000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ath_rate_sample: 1.2 (0.9.4) wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: H/W encryption support: WEP AES AES_CCM TKIP wifi0: mac 5.9 phy 4.3 radio 4.6 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Atheros 5212: mem=0xfbff0000, irq=18 input: ImPS/2 Generic Wheel Mouse as /class/input/input6 Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k usb 2-5: new full speed USB device using ohci_hcd and address 2 Adding 522104k swap on /dev/sdc2. Priority:-2 extents:1 across:522104k usb 2-5: configuration #1 chosen from 1 choice usbcore: registered new interface driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new interface driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) option 2-5:1.0: GSM modem (1-port) converter detected usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0 option 2-5:1.1: GSM modem (1-port) converter detected usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1 usbcore: registered new interface driver option drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 EXT3 FS on sdc1, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem sdc5 Ending clean XFS mount for filesystem: sdc5 XFS mounting filesystem sdc6 Ending clean XFS mount for filesystem: sdc6 kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. XFS mounting filesystem sda5 Ending clean XFS mount for filesystem: sda5 XFS mounting filesystem sda6 Ending clean XFS mount for filesystem: sda6 XFS mounting filesystem sda7 Ending clean XFS mount for filesystem: sda7 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! XFS mounting filesystem sdb5 Ending clean XFS mount for filesystem: sdb5 XFS mounting filesystem sdc3 Ending clean XFS mount for filesystem: sdc3 eth0: no link during initialization. NET: Registered protocol family 17