Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-std-def-alt2 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt5) (GCC) ) #1 SMP Mon Nov 10 17:46:03 UTC 2008 Command line: auto BOOT_IMAGE=2627-std-def-2 ro root=805 panic=30 nolapic noapic acpi=off KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fcf0000 (usable) BIOS-e820: 000000003fcf0000 - 000000003fd96000 (ACPI NVS) BIOS-e820: 000000003fd96000 - 000000003fdfd000 (usable) BIOS-e820: 000000003fdfd000 - 000000003fe5f000 (reserved) BIOS-e820: 000000003fe5f000 - 000000003fe6a000 (usable) BIOS-e820: 000000003fe6a000 - 000000003fedf000 (ACPI NVS) BIOS-e820: 000000003fedf000 - 000000003fee7000 (usable) BIOS-e820: 000000003fee7000 - 000000003feff000 (ACPI data) BIOS-e820: 000000003feff000 - 000000003ff00000 (usable) BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fff80000 - 00000000fff8c000 (reserved) last_pfn = 0x3ff00 max_arch_pfn = 0x3ffffffff x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping 0000000000 - 003fe00000 page 2M 003fe00000 - 003ff00000 page 4k kernel direct mapping tables up to 3ff00000 @ 8000-b000 last_map_addr: 3ff00000 end: 3ff00000 RAMDISK: 00e81000 - 00effc55 DMI 2.5 present. No NUMA configuration found Faking a node at 0000000000000000-000000003ff00000 Bootmem setup node 0 0000000000000000-000000003ff00000 NODE_DATA [0000000000001000 - 0000000000005fff] bootmap [0000000000009000 - 0000000000010fdf] pages 8 (6 early reservations) ==> bootmem [0000000000 - 003ff00000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000815cec] TEXT DATA BSS ==> [0000200000 - 0000815cec] #3 [0000e81000 - 0000effc55] RAMDISK ==> [0000e81000 - 0000effc55] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] found SMP MP-table at [ffff8800000fd1e0] 000fd1e0 [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0003fcf0 0: 0x0003fd96 -> 0x0003fdfd 0: 0x0003fe5f -> 0x0003fe6a 0: 0x0003fedf -> 0x0003fee7 0: 0x0003feff -> 0x0003ff00 On node 0 totalpages: 261386 DMA zone: 2158 pages, LIFO batch:0 DMA32 zone: 253862 pages, LIFO batch:31 Intel MultiProcessor Specification v1.4 MPTABLE: OEM ID: INTEL MPTABLE: Product ID: S3200SHC MPTABLE: APIC at: 0xFEE00000 Processor #0 (Bootup-CPU) I/O APIC #5 Version 32 at 0xFEC00000. Setting APIC routing to flat Processors: 1 SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 000000003fcf0000 - 000000003fd96000 PM: Registered nosave memory: 000000003fdfd000 - 000000003fe5f000 PM: Registered nosave memory: 000000003fe6a000 - 000000003fedf000 PM: Registered nosave memory: 000000003fee7000 - 000000003feff000 Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) PERCPU: Allocating 52256 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 256020 Policy zone: DMA32 Kernel command line: auto BOOT_IMAGE=2627-std-def-2 ro root=805 panic=30 nolapic noapic acpi=off Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) TSC: Using PIT calibration value Detected 1994.977 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! Memory: 1024212k/1047552k available (2962k kernel code, 21332k reserved, 1590k data, 488k init) CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.95 BogoMIPS (lpj=7979908) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. SMP alternatives: switching to UP code Freeing SMP alternatives: 23k freed BIOS bug, local APIC #0 not detected!... ... forcing use of dummy APIC emulation.(tell your hw vendor) SMP disabled Brought up 1 CPUs Total of 1 processors activated (3989.95 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 1552 bytes NET: Registered protocol family 16 PCI: Using configuration type 1 for base access ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: 0000:00:19.0 reg 10 32bit mmio: [41a00000, 41a1ffff] PCI: 0000:00:19.0 reg 14 32bit mmio: [41a20000, 41a20fff] PCI: 0000:00:19.0 reg 18 io port: [20e0, 20ff] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled PCI: 0000:00:1a.0 reg 20 io port: [20c0, 20df] PCI: 0000:00:1a.1 reg 20 io port: [20a0, 20bf] PCI: 0000:00:1a.2 reg 20 io port: [2080, 209f] PCI: 0000:00:1a.7 reg 10 32bit mmio: [41a21400, 41a217ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [2060, 207f] PCI: 0000:00:1d.1 reg 20 io port: [2040, 205f] PCI: 0000:00:1d.2 reg 20 io port: [2020, 203f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [41a21000, 41a213ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [2458, 245f] PCI: 0000:00:1f.2 reg 14 io port: [246c, 246f] PCI: 0000:00:1f.2 reg 18 io port: [2450, 2457] PCI: 0000:00:1f.2 reg 1c io port: [2468, 246b] PCI: 0000:00:1f.2 reg 20 io port: [2430, 243f] PCI: 0000:00:1f.2 reg 24 io port: [2420, 242f] PCI: 0000:00:1f.3 reg 10 64bit mmio: [41a21800, 41a218ff] PCI: 0000:00:1f.3 reg 20 io port: [2000, 201f] PCI: 0000:00:1f.5 reg 10 io port: [2448, 244f] PCI: 0000:00:1f.5 reg 14 io port: [2464, 2467] PCI: 0000:00:1f.5 reg 18 io port: [2440, 2447] PCI: 0000:00:1f.5 reg 1c io port: [2460, 2463] PCI: 0000:00:1f.5 reg 20 io port: [2410, 241f] PCI: 0000:00:1f.5 reg 24 io port: [2400, 240f] PCI: 0000:02:00.0 reg 10 32bit mmio: [40000000, 40ffffff] PCI: 0000:02:00.0 reg 14 32bit mmio: [41800000, 41803fff] PCI: 0000:02:00.0 reg 18 32bit mmio: [41000000, 417fffff] PCI: 0000:02:00.0 reg 30 32bit mmio: [ffff0000, ffffffff] Pre-1.1 PCIe device detected, disable ASPM for 0000:00:1c.4. It can be enabled forcedly with 'pcie_aspm=force' PCI: bridge 0000:00:1c.4 32bit mmio: [41000000, 418fffff] PCI: bridge 0000:00:1c.4 64bit mmio pref: [40000000, 40ffffff] PCI: 0000:03:00.0 reg 10 32bit mmio: [41981000, 41981fff] PCI: 0000:03:00.0 reg 14 io port: [1080, 10bf] PCI: 0000:03:00.0 reg 18 32bit mmio: [41960000, 4197ffff] PCI: 0000:03:00.0 reg 30 32bit mmio: [0, ffff] pci 0000:03:00.0: supports D1 pci 0000:03:00.0: supports D2 pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:00.0: PME# disabled PCI: 0000:03:01.0 reg 10 32bit mmio: [41980000, 41980fff] PCI: 0000:03:01.0 reg 14 io port: [1040, 107f] PCI: 0000:03:01.0 reg 18 32bit mmio: [41940000, 4195ffff] PCI: 0000:03:01.0 reg 30 32bit mmio: [ffff0000, ffffffff] pci 0000:03:01.0: supports D1 pci 0000:03:01.0: supports D2 pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:03:01.0: PME# disabled PCI: 0000:03:02.0 reg 10 32bit mmio: [41920000, 4193ffff] PCI: 0000:03:02.0 reg 14 32bit mmio: [41900000, 4191ffff] PCI: 0000:03:02.0 reg 18 io port: [1000, 103f] PCI: 0000:03:02.0 reg 30 32bit mmio: [fffe0000, ffffffff] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold pci 0000:03:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [1000, 1fff] PCI: bridge 0000:00:1e.0 32bit mmio: [41900000, 419fffff] PCI: Discovered primary peer bus ff [IRQ] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086/2916] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default DMAR:parse DMAR table failure. PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 64-bit timers, 14318180 Hz ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread FFFF88003F9C4040 could not acquire Mutex [1] [20080609] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0x41000000-0x418fffff pci 0000:00:1c.4: PREFETCH window: 0x00000040000000-0x00000040ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0x41900000-0x419fffff pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x000000500fffff PCI: setting IRQ 11 as level-triggered pci 0000:00:1c.0: found PCI INT A -> IRQ 11 pci 0000:00:1c.0: sharing IRQ 11 with 0000:00:1c.4 pci 0000:00:1c.0: sharing IRQ 11 with 0000:02:00.0 pci 0000:00:1c.0: sharing IRQ 11 with 0000:03:00.0 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.4: found PCI INT A -> IRQ 11 pci 0000:00:1c.4: sharing IRQ 11 with 0000:00:1c.0 pci 0000:00:1c.4: sharing IRQ 11 with 0000:02:00.0 pci 0000:00:1c.4: sharing IRQ 11 with 0000:03:00.0 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [0, 0] bus: 01 index 2 mmio: [0, 0] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [41000000, 418fffff] bus: 02 index 2 mmio: [40000000, 40ffffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [1000, 1fff] bus: 03 index 1 mmio: [41900000, 419fffff] bus: 03 index 2 mmio: [50000000, 500fffff] bus: 03 index 3 io port: [0, ffff] bus: 03 index 4 mmio: [0, ffffffffffffffff] bus: ff index 0 io port: [0, ffff] bus: ff index 1 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 507k freed platform rtc_cmos: registered platform RTC device (no PNP device found) audit: initializing netlink socket (disabled) type=2000 audit(1227646982.131:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 2001 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:02:00.0: Boot video device pci 0000:03:00.0: Firmware left e100 interrupts enabled; disabling pci 0000:03:01.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service Linux agpgart interface v0.103 Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Switched to high resolution mode on CPU 0 serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu Driver for HIFN 795x crypto accelerator chip has been successfully registered. TCP bic registered registered taskstats version 1 Freeing unused kernel memory: 488k freed Executing init=/init SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 PCI: setting IRQ 10 as level-triggered ata_piix 0000:00:1f.2: found PCI INT A -> IRQ 10 ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1a.1 ata_piix 0000:00:1f.2: sharing IRQ 10 with 0000:00:1f.5 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2430 irq 14 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2438 irq 15 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST380815AS, 4.AAB, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA ST380815AS 4.AA PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.5: found PCI INT A -> IRQ 10 ata_piix 0000:00:1f.5: sharing IRQ 10 with 0000:00:1a.1 ata_piix 0000:00:1f.5: sharing IRQ 10 with 0000:00:1f.2 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x2448 ctl 0x2464 bmdma 0x2410 irq 10 ata4: SATA max UDMA/133 cmd 0x2440 ctl 0x2460 bmdma 0x2418 irq 10 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 PCI: setting IRQ 9 as level-triggered uhci_hcd 0000:00:1a.0: found PCI INT A -> IRQ 9 uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:00:1d.2 uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:00:1f.3 uhci_hcd 0000:00:1a.0: sharing IRQ 9 with 0000:03:02.0 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1a.0: irq 9, io base 0x000020c0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after uhci_hcd 0000:00:1a.1: found PCI INT B -> IRQ 10 uhci_hcd 0000:00:1a.1: sharing IRQ 10 with 0000:00:1f.2 uhci_hcd 0000:00:1a.1: sharing IRQ 10 with 0000:00:1f.5 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.1: irq 10, io base 0x000020a0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected uhci_hcd 0000:00:1a.2: found PCI INT C -> IRQ 10 uhci_hcd 0000:00:1a.2: sharing IRQ 10 with 0000:00:1a.7 uhci_hcd 0000:00:1a.2: sharing IRQ 10 with 0000:03:01.0 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.2: irq 10, io base 0x00002080 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ehci_hcd 0000:00:1a.7: found PCI INT C -> IRQ 10 ehci_hcd 0000:00:1a.7: sharing IRQ 10 with 0000:00:1a.2 ehci_hcd 0000:00:1a.7: sharing IRQ 10 with 0000:03:01.0 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 10, io mem 0x41a21400 input: PC Speaker as /class/input/input1 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, hpet irqs uhci_hcd 0000:00:1d.0: found PCI INT A -> IRQ 11 uhci_hcd 0000:00:1d.0: sharing IRQ 11 with 0000:00:1d.7 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00002060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: found PCI INT B -> IRQ 11 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002040 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: found PCI INT C -> IRQ 9 uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:00:1a.0 uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:00:1f.3 uhci_hcd 0000:00:1d.2: sharing IRQ 9 with 0000:03:02.0 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 9, io base 0x00002020 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: found PCI INT A -> IRQ 11 ehci_hcd 0000:00:1d.7: sharing IRQ 11 with 0000:00:1d.0 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 11, io mem 0x41a21000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 6 ports detected i801_smbus 0000:00:1f.3: found PCI INT B -> IRQ 9 i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:00:1a.0 i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:00:1d.2 i801_smbus 0000:00:1f.3: sharing IRQ 9 with 0000:03:02.0 Adding 2048248k swap on /dev/sda7. Priority:-1 extents:1 across:2048248k EXT3 FS on sda5, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (8192 buckets, 32768 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it.