Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27-std-def-alt3 (builder@apiary.armor.altlinux.org) (gcc version 4.3.2 20081105 (ALT Linux 4.3.2-alt6) (GCC) ) #1 SMP Tue Nov 25 17:05:26 UTC 2008 PAT WC disabled due to known CPU erratum. BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffeb000 (usable) BIOS-e820: 000000000ffeb000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) DMI 2.3 present. last_pfn = 0xffeb max_arch_pfn = 0x100000 kernel direct mapping tables up to ffeb000 @ 7000-d000 RAMDISK: 0ff43000 - 0ffda4d7 ACPI: RSDP 000F7B40, 0014 (r0 ASUS ) ACPI: RSDT 0FFEB000, 0030 (r1 ASUS TUSL2-C 30303031 MSFT 31313031) ACPI: FACP 0FFEB100, 0074 (r1 ASUS TUSL2-C 30303031 MSFT 31313031) ACPI: DSDT 0FFEB180, 3A5C (r1 ASUS TUSL2-C 1000 MSFT 100000B) ACPI: FACS 0FFFF000, 0040 ACPI: BOOT 0FFEB040, 0028 (r1 ASUS TUSL2-C 30303031 MSFT 31313031) ACPI: APIC 0FFEB080, 005A (r1 ASUS TUSL2-C 30303031 MSFT 31313031) 0MB HIGHMEM available. 255MB LOWMEM available. mapped low ram: 0 - 0ffeb000 low ram: 00000000 - 0ffeb000 bootmap 00002000 - 00004000 (9 early reservations) ==> bootmem [0000000000 - 000ffeb000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 00006bd2c0] TEXT DATA BSS ==> [0000200000 - 00006bd2c0] #4 [000ff43000 - 000ffda4d7] RAMDISK ==> [000ff43000 - 000ffda4d7] #5 [00006be000 - 00006c1000] INIT_PG_TABLE ==> [00006be000 - 00006c1000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0000ffeb HighMem 0x0000ffeb -> 0x0000ffeb Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0000ffeb On node 0 totalpages: 65418 free_area_init_node: node 0, pgdat c058a380, node_mem_map c1000000 DMA zone: 3963 pages, LIFO batch:0 Normal zone: 60879 pages, LIFO batch:15 ACPI: PM-Timer IO Port: 0xe408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) PERCPU: Allocating 38428 bytes of per cpu data NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64842 Kernel command line: root=LABEL=NEWROOT vga=788 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 1005.024 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 253520k/262060k available (2495k kernel code, 8064k reserved, 1215k data, 404k init, 0k highmem) virtual kernel memory layout: fixmap : 0xffe18000 - 0xfffff000 (1948 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB) lowmem : 0xc0000000 - 0xcffeb000 ( 255 MB) .init : 0xc05a7000 - 0xc060c000 ( 404 kB) .data : 0xc046fea0 - 0xc059fd40 (1215 kB) .text : 0xc0200000 - 0xc046fea0 (2495 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 2010.04 BogoMIPS (lpj=4020096) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 18k freed ACPI: Core revision 20080609 ACPI: Checking initramfs for custom DSDT ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Pentium III (Coppermine) stepping 0a APIC calibration not consistent with PM Timer: 87ms instead of 100ms APIC delta adjusted to PM-Timer: 837517 (731228) Brought up 1 CPUs Total of 1 processors activated (2010.04 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0 level CPU groups: 0 net_namespace: 840 bytes NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0e30, last bus=2 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: 0000:00:00.0 reg 10 32bit mmio: [f8000000, fbffffff] pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO PCI: 0000:00:1f.1 reg 20 io port: [a800, a80f] PCI: 0000:00:1f.2 reg 20 io port: [a400, a41f] PCI: 0000:00:1f.3 reg 20 io port: [e800, e80f] PCI: 0000:00:1f.4 reg 20 io port: [a000, a01f] PCI: 0000:01:00.0 reg 10 32bit mmio: [f4000000, f4ffffff] PCI: 0000:01:00.0 reg 14 32bit mmio: [f6000000, f7ffffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [f5ff0000, f5ffffff] PCI: bridge 0000:00:01.0 32bit mmio: [f4000000, f5dfffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [f5f00000, f7ffffff] PCI: 0000:02:0a.0 reg 10 io port: [d800, d8ff] PCI: 0000:02:0a.0 reg 14 32bit mmio: [f3800000, f38000ff] pci 0000:02:0a.0: supports D1 pci 0000:02:0a.0: supports D2 pci 0000:02:0a.0: PME# supported from D1 D2 D3hot D3cold pci 0000:02:0a.0: PME# disabled PCI: 0000:02:0c.0 reg 10 io port: [d400, d41f] pci 0000:02:0c.0: supports D1 pci 0000:02:0c.0: supports D2 PCI: 0000:02:0c.1 reg 10 io port: [d000, d007] pci 0000:02:0c.1: supports D1 pci 0000:02:0c.1: supports D2 PCI: 0000:02:0d.0 reg 10 io port: [b800, b8ff] PCI: 0000:02:0d.0 reg 14 32bit mmio: [f3000000, f30000ff] pci 0000:02:0d.0: supports D1 pci 0000:02:0d.0: supports D2 pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:0d.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [b000, dfff] PCI: bridge 0000:00:1e.0 32bit mmio: [f3000000, f3ffffff] PCI: bridge 0000:00:1e.0 32bit mmio pref: [f5e00000, f5efffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *6 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default tracer: 772 pages allocated for 65536 entries of 48 bytes actual entries 65620 ACPI: RTC can wake from S4 system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0xfffffff could not be reserved system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved system 00:02: ioport range 0x3f0-0x3f1 has been reserved system 00:02: ioport range 0x4d0-0x4d1 has been reserved system 00:03: ioport range 0xe400-0xe47f has been reserved system 00:03: ioport range 0xec00-0xec3f has been reserved PM-Timer running at invalid rate: 87% of normal - aborting. pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xf4000000-0xf5dfffff pci 0000:00:01.0: PREFETCH window: 0x000000f5f00000-0x000000f7ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1e.0: IO window: 0xb000-0xdfff pci 0000:00:1e.0: MEM window: 0xf3000000-0xf3ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f5e00000-0x000000f5efffff pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 mmio: [0, 0] bus: 01 index 1 mmio: [f4000000, f5dfffff] bus: 01 index 2 mmio: [f5f00000, f7ffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [b000, dfff] bus: 02 index 1 mmio: [f3000000, f3ffffff] bus: 02 index 2 mmio: [f5e00000, f5efffff] bus: 02 index 3 io port: [0, ffff] bus: 02 index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 605k freed Simple Boot Flag at 0x3a set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1228012018.404:1): initialized HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 496 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device vesafb: framebuffer at 0xf6000000, mapped to 0xd0880000, using 3750k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 404k freed Write protecting the kernel text: 2496k Write protecting the kernel read-only data: 1020k Executing init=/init Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x02) piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa800-0xa807 ide1: BM-DMA at 0xa808-0xa80f Probing IDE interface ide0... hda: probing with STATUS(0x50) instead of ALTSTATUS(0x00) hda: WDC WD3200AAKB-00WHA0, ATA DISK drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected Probing IDE interface ide1... hdc: SAMSUNG SP1203N, ATA DISK drive hdd: TEAC DW-552G, ATAPI CD/DVD-ROM drive hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdc: UDMA/100 mode selected hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdd: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: Host Protected Area detected. current capacity is 625142448 sectors (320072 MB) native capacity is 73575730178736 sectors (37670773851 MB) hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } ide: failed opcode was: 0x37 hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 <<6>ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide_generic: I/O resource 0x1F0-0x1F7 not free. ide_generic: I/O resource 0x170-0x177 not free. hda5 hda6 > hdc: max request size: 512KiB hdc: Host Protected Area detected. current capacity is 234490943 sectors (120059 MB) native capacity is 234493056 sectors (120060 MB) hdc: Host Protected Area disabled. hdc: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63 hdc: cache flushes supported hdc: hdc1 hdc2 hdc3 < hdc5 hdc6 hdc7 hdc8 hdc9 hdc10 > SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 ACPI: Power Button (CM) [PWRB] fuse init (API version 7.9) Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel i815 Chipset agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000 ACPI: Invalid PBLK length [5] processor ACPI0007:00: registered as cooling_device0 parport_pc 00:08: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] 8139too Fast Ethernet driver 0.9.28 8139too 0000:02:0a.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 eth0: RealTek RTL8139 at 0xd087e000, 00:11:95:5c:b3:57, IRQ 22 eth0: Identified 8139 chip type 'RTL-8100B/8139D' gameport: EMU10K1 is pci0000:02:0c.1/gameport0, io 0xd000, speed 1125kHz via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker via-rhine 0000:02:0d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 eth1: VIA Rhine III at 0x1b800, 00:13:46:ec:f8:87, IRQ 21. eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. hdd: ATAPI 52X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 input: PC Speaker as /devices/platform/pcspkr/input/input3 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ACPI: I/O resource 0000:00:1f.3 [0xe800-0xe80f] conflicts with ACPI region SM00 [0xe800-0xe806] ACPI: Device needs an ACPI driver Error: Driver 'pcspkr' is already registered, aborting... USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1f.2: setting latency timer to 64 uhci_hcd 0000:00:1f.2: UHCI Host Controller uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000a400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: UHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd usb usb1: SerialNumber: 0000:00:1f.2 uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1f.4: setting latency timer to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000a000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-std-def-alt3 uhci_hcd usb usb2: SerialNumber: 0000:00:1f.4 EMU10K1_Audigy 0000:02:0c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 usb 1-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 usb 1-1: Product: BT2.0 usb 2-1: new low speed USB device using uhci_hcd and address 2 input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 usb 2-1: configuration #1 chosen from 1 choice usb 2-1: New USB device found, idVendor=1241, idProduct=1603 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: USB Keyboard usb 2-1: Manufacturer: ppdev: user-space parallel port driver Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb usbcore: registered new interface driver hiddev input: USB Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.0/input/input5 input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1f.4-1 input: USB Keyboard as /devices/pci0000:00/0000:00:1f.4/usb2/2-1/2-1:1.1/input/input6 input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1f.4-1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Adding 522072k swap on /dev/hda1. Priority:-1 extents:1 across:522072k EXT3 FS on hda2, internal journal device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. ReiserFS: hda5: found reiserfs format "3.6" with standard journal ReiserFS: hda5: using ordered data mode ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda5: checking transaction log (hda5) ReiserFS: hda5: Using r5 hash to sort names SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda6 Ending clean XFS mount for filesystem: hda6 ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (4096 buckets, 16384 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ori: link up, 100Mbps, full-duplex, lpa 0x41E1 tech: link up, 100Mbps, full-duplex, lpa 0x45E1 PPP generic driver version 2.4.2 padlock: VIA PadLock Hash Engine not detected. PPP MPPE Compression module registered usb 1-2: new full speed USB device using uhci_hcd and address 3 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=0421, idProduct=043e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: SerialNumber: 357576002050589 usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning scsi 0:0:0:0: Direct-Access Nokia Nokia 6270 0000 PQ: 0 ANSI: 4 sd 0:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled sd 0:0:0:0: [sda] Assuming drive cache: write through sd 0:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 0:0:0:0: [sda] Attached SCSI removable disk usb-storage: device scan complete sd 0:0:0:0: Attached scsi generic sg0 type 0 usb 1-2: USB disconnect, address 3 usb 1-2: new full speed USB device using uhci_hcd and address 4 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: can't set config #1, error -84 usb 1-2: New USB device found, idVendor=0421, idProduct=043d usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: USB disconnect, address 4 usb 1-2: new full speed USB device using uhci_hcd and address 5 usb 1-2: device descriptor read/64, error -71 hub 1-0:1.0: unable to enumerate USB device on port 2 subfs 0.9 usb 1-2: new full speed USB device using uhci_hcd and address 6 usb 1-2: configuration #1 chosen from 1 choice scsi1 : SCSI emulation for USB Mass Storage devices usb 1-2: New USB device found, idVendor=0421, idProduct=043e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: SerialNumber: 357576002050589 usb-storage: device found at 6 usb-storage: waiting for device to settle before scanning scsi 1:0:0:0: Direct-Access Nokia Nokia 6270 0000 PQ: 0 ANSI: 4 sd 1:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 1:0:0:0: [sda] Test WP failed, assume Write Enabled sd 1:0:0:0: [sda] Assuming drive cache: write through sd 1:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 1:0:0:0: [sda] Test WP failed, assume Write Enabled sd 1:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 1:0:0:0: [sda] Attached SCSI removable disk sd 1:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-2: USB disconnect, address 6 usb 1-2: new full speed USB device using uhci_hcd and address 7 usb 1-2: unable to read config index 0 descriptor/all usb 1-2: can't read configurations, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 8 hub 1-0:1.0: unable to enumerate USB device on port 2 usb 1-2: new full speed USB device using uhci_hcd and address 9 usb 1-2: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb 1-2: New USB device found, idVendor=1307, idProduct=0163 usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: USB Flash Drive usb 1-2: Manufacturer: USB 2.0 usb 1-2: SerialNumber: 9915d546e42199 usb-storage: device found at 9 usb-storage: waiting for device to settle before scanning scsi 2:0:0:0: Direct-Access USB 2.0 USB Flash Drive 0.00 PQ: 0 ANSI: 2 sd 2:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00 sd 2:0:0:0: [sda] Assuming drive cache: write through sd 2:0:0:0: [sda] 7897087 512-byte hardware sectors (4043 MB) sd 2:0:0:0: [sda] Write Protect is off sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00 sd 2:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 2:0:0:0: [sda] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! UDP: short packet: From 169.130.116.42:63331 25649/289 to 94.73.192.77:46880 FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-2: USB disconnect, address 9 usb 1-2: new full speed USB device using uhci_hcd and address 10 usb 1-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb 1-2: New USB device found, idVendor=0421, idProduct=043e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: SerialNumber: 357576002050589 usb-storage: device found at 10 usb-storage: waiting for device to settle before scanning scsi 3:0:0:0: Direct-Access Nokia Nokia 6270 0000 PQ: 0 ANSI: 4 sd 3:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 3:0:0:0: [sda] Test WP failed, assume Write Enabled sd 3:0:0:0: [sda] Assuming drive cache: write through sd 3:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 3:0:0:0: [sda] Test WP failed, assume Write Enabled sd 3:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 3:0:0:0: [sda] Attached SCSI removable disk sd 3:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! usb 1-2: USB disconnect, address 10 usb 1-2: new full speed USB device using uhci_hcd and address 11 usb 1-2: configuration #1 chosen from 1 choice usb 1-2: New USB device found, idVendor=0421, idProduct=043d usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: USB disconnect, address 11 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver rndis_host usbcore: registered new interface driver rndis_wlan usb 1-2: new full speed USB device using uhci_hcd and address 12 usb 1-2: device descriptor read/64, error -71 usb 1-2: device descriptor read/64, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 13 usb 1-2: device descriptor read/64, error -71 usb 1-2: device descriptor read/64, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 14 usb 1-2: device not accepting address 14, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 15 usb 1-2: device not accepting address 15, error -71 hub 1-0:1.0: unable to enumerate USB device on port 2 usb 1-2: new full speed USB device using uhci_hcd and address 16 usb 1-2: device descriptor read/64, error -71 usb 1-2: device descriptor read/64, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 17 usb 1-2: device descriptor read/64, error -71 usb 1-2: device descriptor read/64, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 18 usb 1-2: device not accepting address 18, error -71 usb 1-2: new full speed USB device using uhci_hcd and address 19 usb 1-2: device not accepting address 19, error -71 hub 1-0:1.0: unable to enumerate USB device on port 2 usb 1-2: new full speed USB device using uhci_hcd and address 20 usb 1-2: configuration #1 chosen from 1 choice scsi4 : SCSI emulation for USB Mass Storage devices usb 1-2: New USB device found, idVendor=0421, idProduct=043e usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-2: Product: Nokia 6270 usb 1-2: Manufacturer: Nokia usb 1-2: SerialNumber: 357576002050589 usb-storage: device found at 20 usb-storage: waiting for device to settle before scanning scsi 4:0:0:0: Direct-Access Nokia Nokia 6270 0000 PQ: 0 ANSI: 4 sd 4:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled sd 4:0:0:0: [sda] Assuming drive cache: write through sd 4:0:0:0: [sda] 1939457 512-byte hardware sectors (993 MB) sd 4:0:0:0: [sda] Test WP failed, assume Write Enabled sd 4:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 4:0:0:0: [sda] Attached SCSI removable disk sd 4:0:0:0: Attached scsi generic sg0 type 0 usb-storage: device scan complete FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!