Attachment 3124 Details for Bug 18132 – Вывод lspci -vvv

Вывод lspci -vvv

lspci.txt (text/plain), 9.93 KB, created by Михаил on 2008-12-07 22:07:45 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Михаил

Created: 2008-12-07 22:07:45 MSK

Size: 9.93 KB

patch

obsolete

>00:00.0 Host bridge: ATI Technologies Inc Device 5a31 (rev 01)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 64
>	Region 3: Memory at <ignored> (64-bit, non-prefetchable)
>	Kernel modules: ati-agp
>
>00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00009000-00009fff
>	Memory behind bridge: fe100000-fe1fffff
>	Prefetchable memory behind bridge: cdf00000-ddefffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Kernel modules: shpchp
>
>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>		Bridge: PM- B3+
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: I/O ports at 0b00 [size=16]
>	Region 1: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]
>	Kernel driver in use: piix4_smbus
>	Kernel modules: i2c-piix4
>
>00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) (prog-if 8a [Master SecP PriP])
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at ff00 [size=16]
>	Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Kernel driver in use: ATIIXP_IDE
>	Kernel modules: atiixp, pata_atiixp
>
>00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64, Cache Line Size: 64 bytes
>	Interrupt: pin ? routed to IRQ 16
>	Region 0: Memory at febf8000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
>	I/O behind bridge: 0000a000-0000bfff
>	Memory behind bridge: fe200000-feafffff
>	Prefetchable memory behind bridge: ddf00000-dfefffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M] (prog-if 00 [VGA controller])
>	Subsystem: ASUSTeK Computer Inc. Device 1392
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 255 (2000ns min), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at 9800 [size=256]
>	Region 2: Memory at fe1f0000 (32-bit, non-prefetchable) [size=64K]
>	Expansion ROM at fe1c0000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Kernel driver in use: fglrx_pci
>	Kernel modules: radeonfb, fglrx
>
>02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>	Subsystem: ASUSTeK Computer Inc. L8400B or L3C/S notebook
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 20
>	Region 0: I/O ports at b800 [size=256]
>	Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: 8139too
>	Kernel modules: 8139cp, 8139too
>
>02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 168
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: 24000000-27fff000 (prefetchable)
>	Memory window 1: 28000000-2bfff000
>	I/O window 0: 0000a000-0000a0ff
>	I/O window 1: 0000a400-0000a4ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>	Kernel driver in use: yenta_cardbus
>	Kernel modules: yenta_socket
>
>02:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 13)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>	Kernel driver in use: sdhci
>	Kernel modules: sdhci
>
>02:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 04)
>	Subsystem: ASUSTeK Computer Inc. Device 13d7
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Interrupt: pin B routed to IRQ 10
>	Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>

Actions: View

Attachments on bug 18132: 3124