Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25-std-def-alt8.M41.1 (builder@apiary.rio.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP Thu Sep 11 01:14:41 MSD 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f670000 (usable) BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 1142MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f6b80] 000f6b80 Entering add_active_range(0, 0, 521840) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 521840 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 521840 On node 0 totalpages: 521840 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 2284 pages used for memmap HighMem zone: 290180 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F6AB0, 0024 (r2 PTLTD ) ACPI: XSDT 7F676624, 0084 (r1 Sony VAIO 6040000 PTL 0) ACPI: FACP 7F67CC06, 00F4 (r3 Sony VAIO 20070412 PTL 1) ACPI: DSDT 7F6774D0, 56B2 (r1 Sony VAIO 20070412 PTL 20050624) ACPI: FACS 7F67DFC0, 0040 ACPI: APIC 7F67CCFA, 0068 (r1 Sony VAIO 20070412 PTL 5A) ACPI: HPET 7F67CD62, 0038 (r1 Sony VAIO 20070412 PTL 5A) ACPI: MCFG 7F67CD9A, 003C (r1 Sony VAIO 20070412 PTL 5A) ACPI: TCPA 7F67CDD6, 0032 (r1 Sony VAIO 20070412 PTL 5A52) ACPI: SLIC 7F67CE08, 0176 (r1 Sony VAIO 20070412 PTL 1000000) ACPI: APIC 7F67CF7E, 005A (r1 Sony VAIO 20070412 PTL 0) ACPI: BOOT 7F67CFD8, 0028 (r1 Sony VAIO 20070412 PTL 1) ACPI: SSDT 7F6772DA, 01F6 (r1 Sony VAIO 20070412 PTL 20050624) ACPI: SSDT 7F676DED, 04ED (r1 Sony VAIO 20070412 PTL 20050624) ACPI: SSDT 7F676B8E, 025F (r1 Sony VAIO 20070412 PTL 20050624) ACPI: SSDT 7F6766A8, 04E6 (r1 Sony VAIO 20070412 PTL 20050624) ACPI: BIOS bug: multiple APIC/MADT found, using 0 ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org ACPI: DMI detected: Sony ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517764 Kernel command line: auto BOOT_IMAGE=failsafe ro root=UUID=5b605783-17d0-437b-8c3c-9ab6cd7ebec1 resume=/dev/sda3 panic=30 splash=off failsafe single mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1330.040 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2063828k/2087360k available (2298k kernel code, 22460k reserved, 804k data, 392k init, 1169856k highmem) virtual kernel memory layout: fixmap : 0xffe13000 - 0xfffff000 (1968 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc050f000 - 0xc0571000 ( 392 kB) .data : 0xc043ea0e - 0xc0507ba0 ( 804 kB) .text : 0xc0200000 - 0xc043ea0e (2298 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated hpet clockevent registered Calibrating delay using timer specific routine.. 2663.57 BogoMIPS (lpj=5327151) Security Framework initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 17k freed ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM) Solo CPU U1500 @ 1.33GHz stepping 0c Total of 1 processors activated (2663.57 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=180 bytes sizeof(task_struct)=1792 bytes CPU0 attaching sched-domain: domain 0: span 00000001 groups: 00000001 net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xfddef, last bus=8 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: BIOS _OSI(Linux) query ignored via DMI ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *10) ACPI: PCI Interrupt Link [LNKB] (IRQs *10) ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs *10) ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *10) ACPI: PCI Interrupt Link [LNKG] (IRQs *10) ACPI: PCI Interrupt Link [LNKH] (IRQs *10) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz ACPI: RTC can wake from S4 system 00:01: iomem range 0xe0000000-0xefffffff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved system 00:06: ioport range 0x680-0x6ff has been reserved system 00:06: ioport range 0x800-0x80f has been reserved system 00:06: ioport range 0x1000-0x107f has been reserved system 00:06: ioport range 0x1180-0x11bf has been reserved system 00:06: ioport range 0x1640-0x164f has been reserved system 00:06: ioport range 0xfe00-0xfe01 has been reserved PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: 0xf2000000-0xf3ffffff PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff PCI: Bridge: 0000:00:1c.1 IO window: 3000-3fff MEM window: 0xf4000000-0xf40fffff PREFETCH window: 0x000000008c000000-0x000000008c0fffff PCI: Bus 8, cardbus bridge: 0000:07:04.0 IO window: 0x00004000-0x000040ff IO window: 0x00004400-0x000044ff PREFETCH window: 0x88000000-0x8bffffff MEM window: 0x90000000-0x93ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: 0xf4100000-0xf41fffff PREFETCH window: 0x0000000088000000-0x000000008bffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 20 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 1074k freed Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1229808310.432:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 cpuidle: using governor ladder cpuidle: using governor menu TCP bic registered NET: Registered protocol family 1 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 392k freed Write protecting the kernel read-only data: 616k Executing init=/init input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods No dock devices found. libata version 3.00 loaded. ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ACPI: PCI interrupt for device 0000:00:1f.1 disabled ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata1.00: ATA-7: TOSHIBA MK1011GAH, BK002A, max UDMA/100 ata1.00: 195371568 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2: port disabled. ignoring. scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1011GA BK00 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver libusual Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4544000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb 1-3: new high speed USB device using ehci_hcd and address 2 usb 1-3: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb 1-3: New USB device found, idVendor=054c, idProduct=02d5 usb 1-3: New USB device strings: Mfr=0, Product=57, SerialNumber=44 usb 1-3: Product: Sony VAIO USB Internal Optical Drive usb 1-3: SerialNumber: 0013A9912A52 usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning hub 1-0:1.0: unable to enumerate USB device on port 5 hub 1-0:1.0: unable to enumerate USB device on port 7 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-std-def-alt8.M41.1 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.71 PQ: 0 ANSI: 0 usb-storage: device scan complete usb 4-1: new full speed USB device using uhci_hcd and address 2 usb 4-1: configuration #1 chosen from 1 choice usb 4-1: New USB device found, idVendor=0483, idProduct=2016 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: Biometric Coprocessor usb 4-1: Manufacturer: STMicroelectronics usb 5-1: new full speed USB device using uhci_hcd and address 2 usb 5-1: configuration #1 chosen from 1 choice usb 5-1: New USB device found, idVendor=044e, idProduct=300d usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1: Product: UGX usb 5-1: Manufacturer: ALPS usb 5-1: SerialNumber: 019bef3c PM: Starting manual resume from disk XFS mounting filesystem sda5 Starting XFS recovery on filesystem: sda5 (logdev: internal) Ending XFS recovery on filesystem: sda5 (logdev: internal)