Dec 20 22:52:48 ns kernel: scsi0 : ahci
Dec 20 22:52:48 ns kernel: scsi1 : ahci
Dec 20 22:52:48 ns kernel: scsi2 : ahci
Dec 20 22:52:48 ns kernel: scsi3 : ahci
Dec 20 22:52:48 ns kernel: ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22
Dec 20 22:52:48 ns kernel: ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 22
Dec 20 22:52:48 ns kernel: ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22
Dec 20 22:52:48 ns kernel: ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22
Dec 20 22:52:48 ns kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 20 22:52:48 ns kernel: ata1.00: ATA-7: SAMSUNG HD250HJ, FH100-06, max UDMA7
Dec 20 22:52:48 ns kernel: ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 20 22:52:48 ns kernel: ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata1.00: configured for UDMA/133
Dec 20 22:52:48 ns kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 20 22:52:48 ns kernel: ata2.00: ATA-7: SAMSUNG SP2504C, VT100-38, max UDMA7
Dec 20 22:52:48 ns kernel: ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 20 22:52:48 ns kernel: ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns /etc/net: ERROR: /etc/net/scripts/ifup-removable: USE_HOTPLUG is disabled for eth0
Dec 20 22:52:48 ns kernel: ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata2.00: configured for UDMA/133
Dec 20 22:52:48 ns kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 20 22:52:48 ns kernel: ata3.00: ATA-7: SAMSUNG SP2504C, VT100-38, max UDMA7
Dec 20 22:52:48 ns kernel: ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 20 22:52:48 ns kernel: ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata3.00: configured for UDMA/133
Dec 20 22:52:48 ns kernel: ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 20 22:52:48 ns kernel: ata4.00: ATA-8: ST31000340AS, SD15, max UDMA/133
Dec 20 22:52:48 ns kernel: ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Dec 20 22:52:48 ns kernel: ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 20 22:52:48 ns kernel: ata4.00: configured for UDMA/133
Dec 20 22:52:48 ns kernel: scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD250HJ  FH10 PQ: 0 ANSI: 5
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel:  sda: sda1 sda2 sda3
Dec 20 22:52:48 ns kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Dec 20 22:52:48 ns kernel: scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel:  sdb: sdb1 sdb2 sdb3
Dec 20 22:52:48 ns kernel: sd 1:0:0:0: [sdb] Attached SCSI disk
Dec 20 22:52:48 ns kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel:  sdc: sdc1 sdc2 sdc3
Dec 20 22:52:48 ns kernel: sd 2:0:0:0: [sdc] Attached SCSI disk
Dec 20 22:52:48 ns kernel: scsi 3:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] Write Protect is off
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 20 22:52:48 ns kernel:  sdd: unknown partition table
Dec 20 22:52:48 ns kernel: sd 3:0:0:0: [sdd] Attached SCSI disk
Dec 20 22:52:48 ns kernel: ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
Dec 20 22:52:48 ns kernel: scsi4 : pata_atiixp
Dec 20 22:52:48 ns kernel: scsi5 : pata_atiixp
Dec 20 22:52:48 ns kernel: ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
Dec 20 22:52:48 ns kernel: ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
...
Dec 21 05:46:58 ns kernel: ata3.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x6 frozen
Dec 21 05:46:59 ns kernel: ata3: SError: { HostInt }
Dec 21 05:46:59 ns kernel: ata3.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Dec 21 05:46:59 ns kernel:          res 40/00:00:90:b2:32/00:00:00:00:00/40 Emask 0x44 (timeout)
Dec 21 05:46:59 ns kernel: ata3.00: status: { DRDY }
Dec 21 05:46:59 ns kernel: ata3: hard resetting link
Dec 21 05:46:59 ns kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Dec 21 05:46:59 ns kernel: ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 21 05:46:59 ns kernel: ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
Dec 21 05:46:59 ns kernel: ata3.00: configured for UDMA/133
Dec 21 05:46:59 ns kernel: ata3: EH complete
Dec 21 05:46:59 ns kernel: sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Dec 21 05:46:59 ns kernel: sd 2:0:0:0: [sdc] Write Protect is off
Dec 21 05:46:59 ns kernel: sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA