Jan  8 15:26:03 ns kernel: ahci 0000:00:09.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
Jan  8 15:26:03 ns kernel: ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
Jan  8 15:26:03 ns kernel: ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
Jan  8 15:26:03 ns kernel: scsi2 : ahci
Jan  8 15:26:03 ns kernel: scsi3 : ahci
Jan  8 15:26:03 ns kernel: scsi4 : ahci
Jan  8 15:26:03 ns kernel: scsi5 : ahci
Jan  8 15:26:03 ns kernel: ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2303
Jan  8 15:26:03 ns kernel: ata4: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2303
Jan  8 15:26:03 ns kernel: ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2303
Jan  8 15:26:03 ns kernel: ata6: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 2303
Jan  8 15:26:03 ns kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 15:26:03 ns kernel: ata3.00: ATA-7: SAMSUNG HD250HJ, FH100-06, max UDMA7
Jan  8 15:26:03 ns kernel: ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan  8 15:26:03 ns kernel: ata3.00: configured for UDMA/133
Jan  8 15:26:03 ns kernel: ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 15:26:03 ns kernel: ata4.00: ATA-7: SAMSUNG SP2504C, VT100-38, max UDMA7
Jan  8 15:26:03 ns kernel: ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan  8 15:26:03 ns kernel: ata4.00: configured for UDMA/133
Jan  8 15:26:03 ns kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 15:26:03 ns kernel: ata5.00: ATA-7: SAMSUNG SP2504C, VT100-38, max UDMA7
Jan  8 15:26:03 ns kernel: ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan  8 15:26:03 ns kernel: ata5.00: configured for UDMA/133
Jan  8 15:26:03 ns kernel: ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan  8 15:26:03 ns kernel: ata6.00: ATA-8: ST31000340AS, SD15, max UDMA/133
Jan  8 15:26:03 ns kernel: ata6.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jan  8 15:26:03 ns kernel: ata6.00: configured for UDMA/133
Jan  8 15:26:03 ns kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD250HJ  FH10 PQ: 0 ANSI: 5
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel:  sda: sda1 sda2 sda3
Jan  8 15:26:03 ns kernel: sd 2:0:0:0: [sda] Attached SCSI disk
Jan  8 15:26:03 ns kernel: scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel:  sdb: sdb1 sdb2 sdb3
Jan  8 15:26:03 ns kernel: sd 3:0:0:0: [sdb] Attached SCSI disk
Jan  8 15:26:03 ns kernel: scsi 4:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel:  sdc: sdc1 sdc2 sdc3
Jan  8 15:26:03 ns kernel: sd 4:0:0:0: [sdc] Attached SCSI disk
Jan  8 15:26:03 ns kernel: scsi 5:0:0:0: Direct-Access     ATA      ST31000340AS     SD15 PQ: 0 ANSI: 5
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] Write Protect is off
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:26:03 ns kernel:  sdd: unknown partition table
Jan  8 15:26:03 ns kernel: sd 5:0:0:0: [sdd] Attached SCSI disk
...
Jan  8 15:27:58 ns kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan  8 15:27:58 ns kernel: ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Jan  8 15:27:58 ns kernel:          res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jan  8 15:27:58 ns kernel: ata5.00: status: { DRDY }
Jan  8 15:27:58 ns kernel: ata5: hard resetting link
Jan  8 15:27:58 ns kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 15:27:58 ns kernel: ata5.00: configured for UDMA/133
Jan  8 15:27:58 ns kernel: end_request: I/O error, dev sdc, sector 488391872
Jan  8 15:27:58 ns kernel: md: super_written gets error=-5, uptodate=0
Jan  8 15:27:58 ns kernel: raid5: Disk failure on sdc3, disabling device.
Jan  8 15:27:58 ns kernel: raid5: Operation continuing on 2 devices.
Jan  8 15:27:58 ns kernel: ata5: EH complete
Jan  8 15:27:58 ns kernel: sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 15:27:58 ns mdmonitor: Fail event on /dev/md1, related to disc /dev/sdc3
Jan  8 15:27:58 ns kernel: sd 4:0:0:0: [sdc] Write Protect is off
Jan  8 15:27:58 ns kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 15:27:58 ns kernel: md: recovery of RAID array md1
Jan  8 15:27:58 ns kernel: md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
Jan  8 15:27:58 ns kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
Jan  8 15:27:58 ns kernel: md: using 128k window, over a total of 243681856 blocks.
Jan  8 15:27:58 ns kernel: md: resuming recovery of md1 from checkpoint.
Jan  8 15:27:58 ns kernel: md: md1: recovery done.
Jan  8 15:27:58 ns kernel: RAID5 conf printout:
Jan  8 15:27:58 ns kernel:  --- rd:3 wd:2
Jan  8 15:27:58 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 15:27:58 ns kernel:  disk 1, o:0, dev:sdc3
Jan  8 15:27:58 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 15:27:58 ns kernel: RAID5 conf printout:
Jan  8 15:27:58 ns kernel:  --- rd:3 wd:2
Jan  8 15:27:58 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 15:27:58 ns kernel:  disk 1, o:0, dev:sdc3
Jan  8 15:27:58 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 15:27:58 ns kernel: RAID5 conf printout:
Jan  8 15:27:58 ns kernel:  --- rd:3 wd:2
Jan  8 15:27:58 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 15:27:58 ns kernel:  disk 2, o:1, dev:sdb3
...
Jan  8 17:29:34 ns kernel: md: bind<sdc3>
Jan  8 17:29:34 ns kernel: RAID5 conf printout:
Jan  8 17:29:34 ns kernel:  --- rd:3 wd:2
Jan  8 17:29:34 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:29:34 ns kernel:  disk 1, o:1, dev:sdc3
Jan  8 17:29:34 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 17:29:34 ns kernel: md: recovery of RAID array md1
Jan  8 17:29:34 ns kernel: md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
Jan  8 17:29:34 ns kernel: md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
Jan  8 17:29:34 ns kernel: md: using 128k window, over a total of 243681856 blocks.
Jan  8 17:29:34 ns mdmonitor: RebuildStarted event on /dev/md1
Jan  8 17:31:23 ns sshd[11959]: Accepted publickey for lioka from 195.112.124.104 port 58831 ssh2
Jan  8 17:36:45 ns kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan  8 17:36:45 ns kernel: ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Jan  8 17:36:45 ns kernel:          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan  8 17:36:45 ns kernel: ata5.00: status: { DRDY }
Jan  8 17:36:45 ns kernel: ata5: hard resetting link
Jan  8 17:36:45 ns kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 17:36:45 ns kernel: ata5.00: configured for UDMA/133
Jan  8 17:36:45 ns kernel: end_request: I/O error, dev sdc, sector 488391872
Jan  8 17:36:45 ns kernel: md: super_written gets error=-5, uptodate=0
Jan  8 17:36:45 ns kernel: raid5: Disk failure on sdc3, disabling device.
Jan  8 17:36:45 ns mdmonitor: FailSpare event on /dev/md1, related to disc /dev/sdc3
Jan  8 17:36:45 ns kernel: raid5: Operation continuing on 2 devices.
Jan  8 17:36:45 ns kernel: ata5: EH complete
Jan  8 17:36:45 ns kernel: sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 17:36:45 ns kernel: sd 4:0:0:0: [sdc] Write Protect is off
Jan  8 17:36:45 ns kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 17:36:45 ns kernel: md: md1: recovery done.
Jan  8 17:36:45 ns kernel: RAID5 conf printout:
Jan  8 17:36:45 ns kernel:  --- rd:3 wd:2
Jan  8 17:36:45 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:36:45 ns kernel:  disk 1, o:0, dev:sdc3
Jan  8 17:36:45 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 17:36:45 ns kernel: RAID5 conf printout:
Jan  8 17:36:45 ns kernel:  --- rd:3 wd:2
Jan  8 17:36:45 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:36:45 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 17:36:45 ns mdmonitor: RebuildFinished event on /dev/md1
Jan  8 17:44:07 ns kernel: md: unbind<sdc3>
Jan  8 17:44:07 ns kernel: md: export_rdev(sdc3)
Jan  8 17:44:07 ns kernel: md: bind<sdc3>
Jan  8 17:44:07 ns kernel: RAID5 conf printout:
Jan  8 17:44:07 ns kernel:  --- rd:3 wd:2
Jan  8 17:44:07 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:44:07 ns kernel:  disk 1, o:1, dev:sdc3
Jan  8 17:44:07 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 17:44:07 ns kernel: md: recovery of RAID array md1
Jan  8 17:44:07 ns kernel: md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
Jan  8 17:44:07 ns kernel: md: using maximum available idle IO bandwidth (but not more than 6000 KB/sec) for recovery.
Jan  8 17:44:07 ns kernel: md: using 128k window, over a total of 243681856 blocks.
Jan  8 17:44:07 ns mdmonitor: RebuildStarted event on /dev/md1
Jan  8 17:50:50 ns kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
Jan  8 17:50:51 ns kernel: ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
Jan  8 17:50:51 ns kernel:          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Jan  8 17:50:51 ns kernel: ata5.00: status: { DRDY }
Jan  8 17:50:51 ns kernel: ata5: hard resetting link
Jan  8 17:50:51 ns kernel: ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan  8 17:50:51 ns kernel: ata5.00: configured for UDMA/133
Jan  8 17:50:51 ns kernel: end_request: I/O error, dev sdc, sector 488391872
Jan  8 17:50:51 ns kernel: md: super_written gets error=-5, uptodate=0
Jan  8 17:50:51 ns kernel: raid5: Disk failure on sdc3, disabling device.
Jan  8 17:50:51 ns kernel: raid5: Operation continuing on 2 devices.
Jan  8 17:50:51 ns kernel: ata5: EH complete
Jan  8 17:50:51 ns kernel: sd 4:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB)
Jan  8 17:50:51 ns mdmonitor: FailSpare event on /dev/md1, related to disc /dev/sdc3
Jan  8 17:50:51 ns kernel: sd 4:0:0:0: [sdc] Write Protect is off
Jan  8 17:50:51 ns kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan  8 17:50:51 ns kernel: md: md1: recovery done.
Jan  8 17:50:51 ns kernel: RAID5 conf printout:
Jan  8 17:50:51 ns kernel:  --- rd:3 wd:2
Jan  8 17:50:51 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:50:51 ns kernel:  disk 1, o:0, dev:sdc3
Jan  8 17:50:51 ns kernel:  disk 2, o:1, dev:sdb3
Jan  8 17:50:51 ns kernel: RAID5 conf printout:
Jan  8 17:50:51 ns mdmonitor: RebuildFinished event on /dev/md1
Jan  8 17:50:51 ns kernel:  --- rd:3 wd:2
Jan  8 17:50:51 ns kernel:  disk 0, o:1, dev:sda3
Jan  8 17:50:51 ns kernel:  disk 2, o:1, dev:sdb3