Attachment 379 Details for Bug 3854 – dmesg from 2.4.25 kernel

dmesg from 2.4.25 kernel

dmesg.2.4.25 (text/plain), 6.25 KB, created by Yury Aliaev on 2004-04-05 14:07:29 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Yury Aliaev

Created: 2004-04-05 14:07:29 MSD

Size: 6.25 KB

patch

obsolete

>Linux version 2.4.25-std-up-alt1 (builder@salto.malta.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Sun Feb 29 20:06:30 MSK 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>128MB LOWMEM available.
>ACPI: have wakeup address 0xc0001000
>On node 0 totalpages: 32768
>zone(0): 4096 pages.
>zone(1): 28672 pages.
>zone(2): 0 pages.
>DMI 2.2 present.
>49 structures occupying 1180 bytes.
>DMI table at 0x000F0800.
>BIOS Vendor: Award Software International, Inc.
>BIOS Version: 6.00 PG
>BIOS Release: 02/02/2000
>System Vendor:  
>Product Name:  
>Version:  
>Serial Number:  
>Board Vendor:  
>Board Name: ALADDIN5
>Board Version:  
>ACPI: Unable to locate RSDP
>Kernel command line: BOOT_IMAGE=2425-std-up-1 ro root=803 hdd=ide-scsi
>ide_setup: hdd=ide-scsi
>No local APIC present or hardware disabled
>Initializing CPU#0
>Detected 524.093 MHz processor.
>Console: colour VGA+ 80x50
>Calibrating delay loop... 1045.29 BogoMIPS
>Memory: 126824k/131072k available (1226k kernel code, 3860k reserved, 506k data, 136k init, 0k highmem)
>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
>Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
>CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
>CPU:             Common caps: 008021bf 808029bf 00000000 00000002
>CPU: AMD-K6(tm) 3D processor stepping 0c
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: AMD K6
>ACPI: Subsystem revision 20040211
>ACPI: Interpreter disabled.
>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>PCI: ACPI tables contain no PCI IRQ routing entries
>PCI: Probing PCI hardware (bus 00)
>PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Starting kswapd
>kinoded started
>VFS: Disk quotas vdquot_6.5.1
>pty: 256 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>ttyS03 at 0x02e8 (irq = 3) is a 16550A
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 00:0f.0
>PCI: Assigned IRQ 5 for device 00:0f.0
>ALI15X3: chipset revision 194
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:DMA
>hda: C/H/S=1024/16/255 from BIOS ignored
>hda: WDC WD400PB-00EPA0, ATA DISK drive
>blk: queue c0301a80, I/O limit 4095Mb (mask 0xffffffff)
>hdd: CD-W540E, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 78165360 sectors (40021 MB) w/8192KiB Cache, CHS=4865/255/63, UDMA(66)
>Partition check:
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 1024 buckets, 8Kbytes
>TCP: Hash tables configured (established 8192 bind 16384)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>RAMDISK: Compressed image found at block 0
>Freeing initrd memory: 131k freed
>VFS: Mounted root (romfs filesystem) readonly.
>SCSI subsystem driver Revision: 1.00
>kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
>PCI: Found IRQ 10 for device 00:0b.0
>ncr53c8xx: at PCI bus 0, device 11, function 0
>ncr53c8xx: 53c810 detected 
>ncr53c810-0: rev 0x2 on pci bus 0 device 11 function 0 irq 10
>ncr53c810-0: ID 7, Fast-10, Parity Checking
>scsi0 : ncr53c8xx-3.4.3b-20010512
>  Vendor: QUANTUM   Model: VP32210           Rev: 81H8
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
>SCSI device sda: 4308352 512-byte hdwr sectors (2206 MB)
> sda: sda1 sda2 < sda5 > sda3 sda4
>VFS: Mounted root (ext2 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 136k freed
>Executing init=/sbin/init
>Real Time Clock Driver v1.10f
>Adding Swap: 184736k swap-space (priority -1)
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 96M
>agpgart: Detected Ali M1541 chipset
>agpgart: AGP aperture is 64M @ 0xd0000000
>hdd: attached ide-scsi driver.
>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: TEAC      Model: CD-W540E          Rev: 1.0C
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.12
>aty128fb: Rage128 BIOS located at segment C00C0000
>aty128fb: Rage128 Pro PF (AGP) [chip rev 0x1] 16M 128-bit SDR SGRAM (1:1)
>Console: switching to colour frame buffer device 80x30
>fb0: ATY Rage128 frame buffer device on PCI
>aty128fb: Rage128 MTRR set to ON
>MSDOS FS: Using codepage 866
>MSDOS FS: IO charset koi8-r
>MSDOS FS: Using codepage 866
>MSDOS FS: IO charset koi8-r
>SGI XFS with ACLs, realtime, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem ide0(3,9)
>Ending clean XFS mount for filesystem: ide0(3,9)
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
>i8253 count too high! resetting..

Actions: View

Attachments on bug 3854: 361 | 367 | 368 | 369 | 370 | 374 | 375 | 378 | 379 | 383 | 384 | 385 | 397 | 408 | 409 | 417 | 418 | 419 | 420 | 1469 | 1618 | 1633