X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: ALT Linux Sisyphus (20081222) i686
Current Operating System: Linux ildar.innovations.kz 2.6.30-std-def-alt14 #1 SMP Wed Oct 7 06:44:21 UTC 2009 i686
Build Date: 05 November 2009  01:48:11PM
 
	Before reporting problems, check https://bugzilla.altlinux.org/
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 17 11:04:55 2009
(II) Loader magic: 0x3fac0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 5.0
	X.Org XInput driver : 4.0
	X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:0:2:0) 8086:2a02:1025:011b Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a03:1025:011b Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xf0100000/1048576
(==) Using default built-in configuration (21 lines)
(==) --- Start of built-in configuration ---
	Section "Device"
		Identifier	"Builtin Default intel Device 0"
		Driver	"intel"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default intel Screen 0"
		Device	"Builtin Default intel Device 0"
	EndSection
	Section "Device"
		Identifier	"Builtin Default vesa Device 0"
		Driver	"vesa"
	EndSection
	Section "Screen"
		Identifier	"Builtin Default vesa Screen 0"
		Device	"Builtin Default vesa Device 0"
	EndSection
	Section "ServerLayout"
		Identifier	"Builtin Default Layout"
		Screen	"Builtin Default intel Screen 0"
		Screen	"Builtin Default vesa Screen 0"
	EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
	Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
	Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
	catalogue:/etc/X11/fontpath.d
(==) ModulePath set to "/usr/lib/X11/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) System resource ranges:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Executed /usr/libexec/X11/drv.d/x11
(II) LoadModule: "extmod"
(II) Loading /usr/lib/X11/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/X11/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/X11/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/X11/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/X11/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/X11/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 2.9.1
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/X11/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
	compiled for 1.6.0, module version = 2.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/X11/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 0.1.0
	ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenByBusid: drmOpenMinor returns 6
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
	"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF0000000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 02:3C.06, clock range 25.0MHz - 200.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0   89.00  1440 1488 1520 1600  900 903 909 926 +hsync +vsync (55.6 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1400x1050"x0.0  156.00  1400 1504 1648 1896  1050 1053 1057 1099 -hsync +vsync (82.3 kHz)
(II) intel(0): Modeline "1440x900"x0.0  136.75  1440 1536 1688 1936  900 903 909 942 -hsync +vsync (70.6 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1280x800"x0.0  106.50  1280 1360 1488 1696  800 803 809 838 -hsync +vsync (62.8 kHz)
(II) intel(0): Modeline "1280x800"x0.0   83.50  1280 1352 1480 1680  800 803 809 831 -hsync +vsync (49.7 kHz)
(II) intel(0): Modeline "1152x921"x76.0  113.47  1152 1224 1352 1552  921 922 925 962 -hsync +vsync (73.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1280x800
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (410, 260) mm
(**) intel(0): DPI set to (79, 78)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/X11/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000207 to 0x80000237
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS OFIELD_INT_STATUS EFIELD_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000246 to 0x80000246
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/X11/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II)         solid
(II)         copy
(II)         composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/X11/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 261 x 163
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/X11/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
	compiled for 1.6.5, module version = 2.2.6
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/X11/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
	compiled for 1.6.3, module version = 1.1.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.3
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1700"
(**) Option "RightEdge" "5300"
(**) Option "TopEdge" "1700"
(**) Option "BottomEdge" "4200"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "VertScrollDelta" "100"
(**) Option "VertEdgeScroll" "true"
(**) Option "HorizEdgeScroll" "true"
(**) Option "TouchpadOff" "0"
(**) Option "RTCornerButton" "2"
(**) Option "RBCornerButton" "3"
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(**) Option "MinSpeed" "0.25"
(**) Option "MaxSpeed" "0.7"
(**) Option "AccelFactor" "0.0010"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event12"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "AccelerationScheme" "lightweight"
(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
(II) USB-compliant keyboard: initialized for relative axes.
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event11"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
(**) Primax Electronics Apple Optical USB Mouse: always reports core events
(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event13"
(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
(**) Option "AccelerationScheme" "lightweight"
(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x1024 stride 1280
(II) intel(0): New front buffer at 0x271b000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
(II) intel(0): New front buffer at 0x2f1b000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0x3f1b000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xee88000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
(II) Primax Electronics Apple Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
(**) Primax Electronics Apple Optical USB Mouse: always reports core events
(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event11"
(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
(**) Option "AccelerationScheme" "lightweight"
(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event12"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event13"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "AccelerationScheme" "lightweight"
(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
(II) USB-compliant keyboard: initialized for relative axes.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x960 stride 1280
(II) intel(0): New front buffer at 0x5500000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
(II) intel(0): New front buffer at 0x6500000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0x9e0e000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xb55d000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
(II) Primax Electronics Apple Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event11"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event12"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "AccelerationScheme" "lightweight"
(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
(II) USB-compliant keyboard: initialized for relative axes.
(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
(**) Primax Electronics Apple Optical USB Mouse: always reports core events
(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event13"
(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
(**) Option "AccelerationScheme" "lightweight"
(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x960 stride 1280
(II) intel(0): New front buffer at 0x6ff4000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
(II) intel(0): New front buffer at 0x89f4000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0xb114000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
(II) intel(0): New front buffer at 0xeb8a000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0x4d61000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
(II) intel(0): New front buffer at 0xa8c8000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0xb8c8000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x960 stride 2560
(II) intel(0): New front buffer at 0xeb88000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0xb238000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xc238000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
(II) Primax Electronics Apple Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SEC", prod id 41235
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SEC", prod id 41235
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SEC", prod id 41235
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SEC", prod id 41235
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2304x800 stride 2304
(II) intel(0): New front buffer at 0x446d000
(II) config/hal: Adding input device Logitech USB wireless Mouse & Presenter
(**) Logitech USB wireless Mouse & Presenter: always reports core events
(**) Logitech USB wireless Mouse & Presenter: Device: "/dev/input/event12"
(II) Logitech USB wireless Mouse & Presenter: Found 3 mouse buttons
(II) Logitech USB wireless Mouse & Presenter: Found x and y relative axes
(II) Logitech USB wireless Mouse & Presenter: Found scroll wheel(s)
(II) Logitech USB wireless Mouse & Presenter: Configuring as mouse
(**) Logitech USB wireless Mouse & Presenter: YAxisMapping: buttons 4 and 5
(**) Logitech USB wireless Mouse & Presenter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB wireless Mouse & Presenter" (type: MOUSE)
(**) Option "AccelerationScheme" "lightweight"
(**) Logitech USB wireless Mouse & Presenter: (accel) selected scheme lightweight/2
(II) Logitech USB wireless Mouse & Presenter: initialized for relative axes.
(II) config/hal: Adding input device Logitech USB wireless Mouse & Presenter
(**) Logitech USB wireless Mouse & Presenter: always reports core events
(**) Logitech USB wireless Mouse & Presenter: Device: "/dev/input/event11"
(II) Logitech USB wireless Mouse & Presenter: Found 1 mouse buttons
(II) Logitech USB wireless Mouse & Presenter: Found scroll wheel(s)
(II) Logitech USB wireless Mouse & Presenter: Found keys
(II) Logitech USB wireless Mouse & Presenter: Configuring as keyboard
(II) Logitech USB wireless Mouse & Presenter: Adding scrollwheel support
(**) Logitech USB wireless Mouse & Presenter: YAxisMapping: buttons 4 and 5
(**) Logitech USB wireless Mouse & Presenter: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB wireless Mouse & Presenter" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(EE) Logitech USB wireless Mouse & Presenter: failed to initialize for relative axes.
(II) config/hal: removing device Logitech USB wireless Mouse & Presenter
(II) Logitech USB wireless Mouse & Presenter: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device Logitech USB wireless Mouse & Presenter
(II) Logitech USB wireless Mouse & Presenter: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00ea6fff: front buffer (7200 kB) X tiled
(II) intel(0): 0x00f9f000-0x00f9ffff: overlay registers (4 kB)
(II) intel(0): 0x00fa0000-0x00fa9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0x34a5000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Primax Electronics Apple Optical USB Mouse
(**) Primax Electronics Apple Optical USB Mouse: always reports core events
(**) Primax Electronics Apple Optical USB Mouse: Device: "/dev/input/event11"
(II) Primax Electronics Apple Optical USB Mouse: Found 8 mouse buttons
(II) Primax Electronics Apple Optical USB Mouse: Found x and y relative axes
(II) Primax Electronics Apple Optical USB Mouse: Found scroll wheel(s)
(II) Primax Electronics Apple Optical USB Mouse: Configuring as mouse
(**) Primax Electronics Apple Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Primax Electronics Apple Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Primax Electronics Apple Optical USB Mouse" (type: MOUSE)
(**) Option "AccelerationScheme" "lightweight"
(**) Primax Electronics Apple Optical USB Mouse: (accel) selected scheme lightweight/2
(II) Primax Electronics Apple Optical USB Mouse: initialized for relative axes.
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event12"
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device USB-compliant keyboard
(**) USB-compliant keyboard: always reports core events
(**) USB-compliant keyboard: Device: "/dev/input/event13"
(II) USB-compliant keyboard: Found 14 mouse buttons
(II) USB-compliant keyboard: Found x and y relative axes
(II) USB-compliant keyboard: Found scroll wheel(s)
(II) USB-compliant keyboard: Found keys
(II) USB-compliant keyboard: Configuring as mouse
(II) USB-compliant keyboard: Configuring as keyboard
(**) USB-compliant keyboard: YAxisMapping: buttons 4 and 5
(**) USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "USB-compliant keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "AccelerationScheme" "lightweight"
(**) USB-compliant keyboard: (accel) selected scheme lightweight/2
(II) USB-compliant keyboard: initialized for relative axes.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x1024 stride 1280
(II) intel(0): New front buffer at 0x4a8f000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2560x1024 stride 2560
(II) intel(0): New front buffer at 0x5e8f000
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 2720x900 stride 2816
(II) intel(0): New front buffer at 0x6e8f000
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(WW) config/hal: device AT Translated Set 2 keyboard already added. Ignoring.
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "ACR", prod id 44416
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x01149fff: front buffer (9900 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017a9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) Primax Electronics Apple Optical USB Mouse: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) USB-compliant keyboard: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Allocate new frame buffer 1280x800 stride 1280
(II) intel(0): New front buffer at 0xf09f000
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) config/hal: removing device Primax Electronics Apple Optical USB Mouse
(II) Primax Electronics Apple Optical USB Mouse: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) config/hal: removing device USB-compliant keyboard
(II) USB-compliant keyboard: Close
(II) UnloadModule: "evdev"
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000:            end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000:            start of memory manager
(II) intel(0): 0x0079f000-0x00b86fff: front buffer (4000 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000:            end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is off
(II) intel(0):   Display plane A is now disabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe none
(II) intel(0):   Output TV is connected to pipe none
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): EDID vendor "AUO", prod id 13588
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   68.90  1280 1301 1333 1408  800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "AUO", prod id 13588
(WW) intel(0): i830_uxa_prepare_access: bo map failed

Backtrace:
0: /usr/bin/Xorg(xorg_backtrace+0x3b) [0x812c56b]
1: /usr/bin/Xorg(xf86SigHandler+0x9e) [0x80ca32e]
2: [0xb7f4c400]
3: /usr/lib/X11/modules/libfb.so(fbCopyNtoN+0x24c) [0xb77c377c]
4: /usr/lib/X11/modules/drivers/intel_drv.so(uxa_copy_n_to_n+0x73a) [0xb79b092a]
5: /usr/lib/X11/modules/libfb.so(fbCopyRegion+0x213) [0xb77c2703]
6: /usr/lib/X11/modules/libfb.so(fbDoCopy+0x44d) [0xb77c2c2d]
7: /usr/lib/X11/modules/drivers/intel_drv.so(uxa_copy_area+0x98) [0xb79b0188]
8: /usr/bin/Xorg [0x8179573]
9: /usr/bin/Xorg(ProcCopyArea+0x165) [0x8084be5]
10: /usr/bin/Xorg(Dispatch+0x35f) [0x808694f]
11: /usr/bin/Xorg(main+0x395) [0x806bb05]
12: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7b3ab26]
13: /usr/bin/Xorg [0x806afb1]

Fatal server error:
Caught signal 11.  Server aborting


Please consult the The X.Org Foundation support 
	 at https://bugzilla.altlinux.org/
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) AIGLX: Suspending AIGLX clients for VT switch