Attachment 420 Details for Bug 3854 – dmesg from 2.6.5 kernel after "setpci" command implementation, ohci-hcd loading and usbdevfs mounting

dmesg from 2.6.5 kernel after "setpci" command implementation, ohci-hcd loading and usbdevfs mounting

dmesg.2.6.5.new (text/plain), 7.11 KB, created by Yury Aliaev on 2004-05-27 11:48:33 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Yury Aliaev

Created: 2004-05-27 11:48:33 MSD

Size: 7.11 KB

patch

obsolete

>Linux version 2.6.5-std26-up-alt1 (builder@penalty.malta.altlinux.ru) (gcc version 3.3.3 20040216 (ALT Linux, build 3.3.3-alt2)) #1 Mon Apr 5 20:19:51 MSD 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>128MB LOWMEM available.
>On node 0 totalpages: 32768
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 28672 pages, LIFO batch:7
>  HighMem zone: 0 pages, LIFO batch:1
>DMI 2.2 present.
>ACPI disabled because your bios is from 2000 and too old
>You can enable it with acpi=force
>Built 1 zonelists
>Kernel command line: BOOT_IMAGE=265-std26-up-1 ro root=803 hdd=ide-scsi
>ide_setup: hdd=ide-scsi
>No local APIC present or hardware disabled
>Initializing CPU#0
>PID hash table entries: 1024 (order 10: 8192 bytes)
>Detected 523.956 MHz processor.
>Using tsc for high-res timesource
>Console: colour VGA+ 80x25
>Memory: 126364k/131072k available (1517k kernel code, 4144k reserved, 761k data, 184k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 1034.24 BogoMIPS
>Security Scaffold v1.0.0 initialized
>Capability LSM initialized
>Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 138k freed
>CPU:     After generic identify, caps: 008021bf 808029bf 00000000 00000000
>CPU:     After vendor identify, caps: 008021bf 808029bf 00000000 00000000
>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
>CPU:     After all inits, caps: 008021bf 808029bf 00000000 00000002
>CPU: AMD-K6(tm) 3D processor stepping 0c
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040326
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>PnPBIOS: Scanning system for PnP BIOS support...
>PnPBIOS: Found PnP BIOS installation structure at 0xc00fbeb0
>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbed8, dseg 0xf0000
>pnp: 00:0a: ioport range 0x40b-0x40b has been reserved
>pnp: 00:0a: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:0a: ioport range 0x5000-0x501f has been reserved
>pnp: 00:0a: ioport range 0x4000-0x403f has been reserved
>PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver
>ACPI: ACPI tables contain no PCI IRQ routing entries
>PCI: Invalid ACPI-PCI IRQ routing table
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0
>PCI: IRQ 0 for device 0000:00:0f.0 doesn't match PIRQ mask - try pci=usepirqmask
>Total HugeTLB memory allocated, 0
>ikconfig 0.7 with /proc/config*
>VFS: Disk quotas dquot_6.5.1
>Initializing Cryptographic API
>Activating ISA DMA hang workarounds.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 0000:00:0f.0
>PCI: IRQ 0 for device 0000:00:0f.0 doesn't match PIRQ mask - try pci=usepirqmask
>PCI: Assigned IRQ 5 for device 0000:00:0f.0
>ALI15X3: chipset revision 194
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:DMA
>hda: WDC WD400PB-00EPA0, ATA DISK drive
>Using anticipatory io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hdd: CD-W540E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 78165360 sectors (40020 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(66)
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
>mice: PS/2 mouse device common for all mice
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 1024 buckets, 8Kbytes
>TCP: Hash tables configured (established 8192 bind 16384)
>NET: Registered protocol family 1
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>SCSI subsystem initialized
>PCI: Found IRQ 10 for device 0000:00:0b.0
>sym0: <810> rev 0x2 at pci 0000:00:0b.0 irq 10
>sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
>sym0: SCSI BUS has been reset.
>scsi0 : sym-2.1.18i
>  Vendor: QUANTUM   Model: VP32210           Rev: 81H8
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>sym0:1:0: tagged command queuing enabled, command queue depth 16.
>sym0:1: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 8)
>SCSI device sda: 4308352 512-byte hdwr sectors (2206 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 > sda3 sda4
>Attached scsi disk sda at scsi0, channel 0, id 1, lun 0
>VFS: Mounted root (ext2 filesystem) readonly.
>Trying to move old root to /initrd ... failed
>Unmounting old root
>VFS: Busy inodes after unmount. Self-destruct in 5 seconds.  Have a nice day...
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 184k freed
>Executing init=/sbin/init
>Real Time Clock Driver v1.12
>Adding 184736k swap on /dev/sda4.  Priority:-1 extents:1
>Linux agpgart interface v0.100 (c) Dave Jones
>ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device
>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>  Vendor: TEAC      Model: CD-W540E          Rev: 1.0C
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 1, lun 0,  type 0
>Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0,  type 5
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>PCI: Found IRQ 11 for device 0000:00:0a.0
>warning: process `update' used the obsolete bdflush system call
>Fix your initscripts?
>warning: process `update' used the obsolete bdflush system call
>Fix your initscripts?
>drivers/usb/core/usb.c: registered new driver usbfs
>drivers/usb/core/usb.c: registered new driver hub
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd: block sizes: ed 64 td 64
>PCI: Found IRQ 5 for device 0000:00:02.0
>ohci_hcd 0000:00:02.0: ALi Corporation USB 1.1 Controller
>ohci_hcd 0000:00:02.0: irq 5, pci mem c88b4000
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected

Actions: View

Attachments on bug 3854: 361 | 367 | 368 | 369 | 370 | 374 | 375 | 378 | 379 | 383 | 384 | 385 | 397 | 408 | 409 | 417 | 418 | 419 | 420 | 1469 | 1618 | 1633