Attachment 4233 Details for Bug 22854 – dmesg после загрузки ядра 2.6.24-wks-smp-alt2.4

dmesg после загрузки ядра 2.6.24-wks-smp-alt2.4

dmesg.save (text/plain), 20.53 KB, created by Ivan Donchevskiy on 2010-01-29 16:12:18 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Ivan Donchevskiy

Created: 2010-01-29 16:12:18 MSK

Size: 20.53 KB

patch

obsolete

>[    0.000000] Linux version 2.6.24-wks-smp-alt2.4 (builder@yalt64.vps) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt2)) #1 SMP PREEMPT Wed May 21 01:22:44 MSD 2008
>[    0.000000] BIOS-provided physical RAM map:
>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
>[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
>[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
>[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bf20000 (usable)
>[    0.000000]  BIOS-e820: 000000001bf20000 - 000000001bf26000 (ACPI data)
>[    0.000000]  BIOS-e820: 000000001bf26000 - 000000001bf80000 (ACPI NVS)
>[    0.000000]  BIOS-e820: 000000001bf80000 - 0000000020000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>[    0.000000] 0MB HIGHMEM available.
>[    0.000000] 447MB LOWMEM available.
>[    0.000000] found SMP MP-table at 000f8410
>[    0.000000] Entering add_active_range(0, 0, 114464) 0 entries of 256 used
>[    0.000000] Zone PFN ranges:
>[    0.000000]   DMA             0 ->     4096
>[    0.000000]   Normal       4096 ->   114464
>[    0.000000]   HighMem    114464 ->   114464
>[    0.000000] Movable zone start PFN for each node
>[    0.000000] early_node_map[1] active PFN ranges
>[    0.000000]     0:        0 ->   114464
>[    0.000000] On node 0 totalpages: 114464
>[    0.000000]   DMA zone: 32 pages used for memmap
>[    0.000000]   DMA zone: 0 pages reserved
>[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
>[    0.000000]   Normal zone: 862 pages used for memmap
>[    0.000000]   Normal zone: 109506 pages, LIFO batch:31
>[    0.000000]   HighMem zone: 0 pages used for memmap
>[    0.000000]   Movable zone: 0 pages used for memmap
>[    0.000000] DMI present.
>[    0.000000] ACPI: RSDP 000F83E0, 0014 (r0 PTLTD )
>[    0.000000] ACPI: RSDT 1BF2260F, 0038 (r1 PTLTD    RSDT    6040000  LTP        0)
>[    0.000000] ACPI: FACP 1BF25D8E, 0074 (r1 NVIDIA MCP51M    6040000 PTL_    F4240)
>[    0.000000] ACPI: DSDT 1BF22647, 3747 (r1 NVIDIA   MCP51M  6040000 MSFT  100000E)
>[    0.000000] ACPI: FACS 1BF26FC0, 0040
>[    0.000000] ACPI: APIC 1BF25E02, 0050 (r1 NVIDIA NV_APIC_  6040000  LTP        0)
>[    0.000000] ACPI: SSDT 1BF25E52, 00D6 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>[    0.000000] ACPI: MCFG 1BF25F28, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>[    0.000000] ACPI: APIC 1BF25F64, 0074 (r1 PTLTD  	 APIC    6040000  LTP        0)
>[    0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
>[    0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
>[    0.000000] If you got timer trouble try acpi_use_timer_override
>[    0.000000] ACPI: PM-Timer IO Port: 0x1008
>[    0.000000] ACPI: Local APIC address 0xfee00000
>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>[    0.000000] Processor #0 15:12 APIC version 16
>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>[    0.000000] ACPI: IRQ9 used by override.
>[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>[    0.000000] Using ACPI (MADT) for SMP configuration information
>[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
>[    0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113570
>[    0.000000] Kernel command line: BOOT_IMAGE=2624-wks-smp-24 ro root=802 3
>[    0.000000] mapped APIC to ffffb000 (fee00000)
>[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
>[    0.000000] Enabling fast FPU save and restore... done.
>[    0.000000] Enabling unmasked SIMD FPU exception support... done.
>[    0.000000] Initializing CPU#0
>[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
>[    0.000000] Detected 1808.283 MHz processor.
>[   12.522666] spurious 8259A interrupt: IRQ7.
>[   12.526070] Console: colour VGA+ 80x25
>[   12.526073] console [tty0] enabled
>[   12.537132] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>[   12.537725] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>[   12.571747] Memory: 448948k/457856k available (1824k kernel code, 7872k reserved, 737k data, 260k init, 0k highmem, 0k BadRAM)
>[   12.572043] virtual kernel memory layout:
>[   12.572044]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
>[   12.572045]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>[   12.572046]     vmalloc : 0xcc800000 - 0xff7fe000   ( 815 MB)
>[   12.572048]     lowmem  : 0xb0000000 - 0xcbf20000   ( 447 MB)
>[   12.572049]       .init : 0xb0387000 - 0xb03c8000   ( 260 kB)
>[   12.572050]       .data : 0xb02c817a - 0xb03805e4   ( 737 kB)
>[   12.572051]       .text : 0xb0100000 - 0xb02c817a   (1824 kB)
>[   12.573367] Checking if this processor honours the WP bit even in supervisor mode... Ok.
>[   12.573726] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
>[   12.624879] Calibrating delay using timer specific routine.. 3609.62 BogoMIPS (lpj=180481)
>[   12.625236] Security Framework initialized
>[   12.625413] Capability LSM initialized
>[   12.625592] Mount-cache hash table entries: 512
>[   12.625906] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
>[   12.625916] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>[   12.626094] CPU: L2 Cache: 128K (64 bytes/line)
>[   12.626275] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
>[   12.626282] Intel machine check architecture supported.
>[   12.626459] Intel machine check reporting enabled on CPU#0.
>[   12.626635] Compat vDSO mapped to ffffe000.
>[   12.626818] Checking 'hlt' instruction... OK.
>[   12.627534] SMP alternatives: switching to UP code
>[   12.628837] Freeing SMP alternatives: 10k freed
>[   12.629142] Early unpacking initramfs... done
>[   12.655362] Freeing initrd memory: 521k freed
>[   12.655539] ACPI: Core revision 20070126
>[   12.655772] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>[   12.662739] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
>[   12.663029] Total of 1 processors activated (3609.62 BogoMIPS).
>[   12.663602] ENABLING IO-APIC IRQs
>[   12.664024] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>[   12.765076] Brought up 1 CPUs
>[   12.765461] net_namespace: 64 bytes
>[   12.765627] Booting paravirtualized kernel on bare hardware
>[   12.766239] NET: Registered protocol family 16
>[   12.766594] ACPI: bus type pci registered
>[   12.766844] PCI: Using MMCONFIG
>[   12.767014] Setting up standard PCI resources
>[   12.768943] ACPI: EC: Look up EC in DSDT
>[   12.770118] ACPI: Interpreter enabled
>[   12.770286] ACPI: (supports S0 S3 S4 S5)
>[   12.770581] ACPI: Using IOAPIC for interrupt routing
>[   12.771404] ACPI: EC: non-query interrupt received, switching to interrupt mode
>[   12.776960] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
>[   12.777134] ACPI: EC: driver started in interrupt mode
>[   12.777374] ACPI: PCI Root Bridge [PCI0] (0000:00)
>[   12.778889] PCI: Transparent bridge - 0000:00:10.0
>[   12.779111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>[   12.779224] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>[   12.803153] ACPI: PCI Interrupt Link [LNK1] (IRQs 10) *0, disabled.
>[   12.803661] ACPI: PCI Interrupt Link [LNK2] (IRQs 17) *11
>[   12.804123] ACPI: PCI Interrupt Link [LNK3] (IRQs 18) *0, disabled.
>[   12.804614] ACPI: PCI Interrupt Link [LNK4] (IRQs 19) *0, disabled.
>[   12.805100] ACPI: PCI Interrupt Link [LK1E] (IRQs 20 21 22 23) *0, disabled.
>[   12.805681] ACPI: PCI Interrupt Link [LK2E] (IRQs 20 21 22 23) *0
>[   12.806229] ACPI: PCI Interrupt Link [LK3E] (IRQs 20 21 22 23) *5, disabled.
>[   12.806819] ACPI: PCI Interrupt Link [LK4E] (IRQs 20 21 22 23) *0, disabled.
>[   12.807402] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
>[   12.807946] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11
>[   12.808497] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *10
>[   12.809046] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
>[   12.809607] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
>[   12.810186] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>[   12.810763] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
>[   12.811338] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
>[   12.811931] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *7
>[   12.812489] ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0
>[   12.813049] Linux Plug and Play Support v0.97 (c) Adam Belay
>[   12.813248] pnp: PnP ACPI init
>[   12.813425] ACPI: bus type pnp registered
>[   12.816062] pnp: PnP ACPI: found 11 devices
>[   12.816232] ACPI: ACPI bus type pnp unregistered
>[   12.816398] PnPBIOS: Disabled by ACPI PNP
>[   12.816810] PCI: Using ACPI for IRQ routing
>[   12.816980] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>[   12.817673] NetLabel: Initializing
>[   12.817837] NetLabel:  domain hash size = 128
>[   12.818001] NetLabel:  protocols = UNLABELED CIPSOv4
>[   12.818174] NetLabel:  unlabeled traffic allowed by default
>[   12.818362] Time: tsc clocksource has been installed.
>[   12.818807] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
>[   12.819098] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
>[   12.819385] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
>[   12.819669] system 00:00: iomem range 0x0-0x0 could not be reserved
>[   12.819841] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
>[   12.820008] system 00:03: ioport range 0xfe10-0xfe11 has been reserved
>[   12.820172] system 00:03: ioport range 0xfe00-0xfe00 has been reserved
>[   12.850758] PCI: Bus 5, cardbus bridge: 0000:04:07.0
>[   12.850924]   IO window: 00001000-000010ff
>[   12.851088]   IO window: 00001400-000014ff
>[   12.851252]   PREFETCH window: 34000000-37ffffff
>[   12.851419]   MEM window: 38000000-3bffffff
>[   12.851587] PCI: Bridge: 0000:00:10.0
>[   12.851747]   IO window: disabled.
>[   12.851908]   MEM window: c3000000-c30fffff
>[   12.852072]   PREFETCH window: disabled.
>[   12.852246] PCI: Setting latency timer of device 0000:00:10.0 to 64
>[   12.852259] PCI: Enabling device 0000:04:07.0 (0104 -> 0107)
>[   12.852666] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
>[   12.852842] ACPI: PCI Interrupt 0000:04:07.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>[   12.856153] NET: Registered protocol family 2
>[   12.857211] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>[   12.857623] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>[   12.858027] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
>[   12.858389] TCP: Hash tables configured (established 16384 bind 16384)
>[   12.858559] TCP reno registered
>[   12.859672] audit: initializing netlink socket (disabled)
>[   12.859857] audit(1264769923.175:1): initialized
>[   12.860147] Total HugeTLB memory allocated, 0
>[   12.862175] VFS: Disk quotas dquot_6.5.1
>[   12.862430] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>[   12.862897] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>[   12.863192] io scheduler noop registered
>[   12.863357] io scheduler anticipatory registered
>[   12.863519] io scheduler deadline registered
>[   12.863690] io scheduler cfq registered (default)
>[   12.863868] pci 0000:00:00.0: Enabling HT MSI Mapping
>[   12.864063] Boot video device is 0000:00:05.0
>[   12.864090] pci 0000:00:09.0: Enabling HT MSI Mapping
>[   13.076418] pci 0000:00:0e.0: Enabling HT MSI Mapping
>[   13.076591] pci 0000:00:10.0: Enabling HT MSI Mapping
>[   13.076767] pci 0000:00:10.1: Enabling HT MSI Mapping
>[   13.077340] isapnp: Scanning for PnP cards...
>[   13.432925] isapnp: No Plug & Play device found
>[   13.435325] Real Time Clock Driver v1.12ac
>[   13.435606] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>[   13.436071] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   13.436680] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>[   13.437546] RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>[   13.437930] input: Macintosh mouse button emulation as /devices/virtual/input/input0
>[   13.438318] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>[   13.440663] i8042.c: Detected active multiplexing controller, rev 1.1.
>[   13.441920] serio: i8042 KBD port at 0x60,0x64 irq 1
>[   13.442086] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>[   13.442251] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>[   13.442414] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>[   13.442579] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>[   13.443070] mice: PS/2 mouse device common for all mice
>[   13.443269] cpuidle: using governor ladder
>[   13.443436] cpuidle: using governor menu
>[   13.443729] TCP bic registered
>[   13.443902] NET: Registered protocol family 1
>[   13.444078] Using IPI No-Shortcut mode
>[   13.444270] registered taskstats version 1
>[   13.444790] Freeing unused kernel memory: 260k freed
>[   13.445141] Executing init=/init
>[   13.466913] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>[   13.561209] Switched to high resolution mode on CPU 0
>[   13.650880] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>[   13.651054] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>[   13.655196] NFORCE-MCP51: IDE controller (0x10de:0x0265 rev 0xa1) at  PCI slot 0000:00:0d.0
>[   13.655526] NFORCE-MCP51: not 100% native mode: will probe irqs later
>[   13.655692] NFORCE-MCP51: BIOS didn't set cable bits correctly. Enabling workaround.
>[   13.655983] NFORCE-MCP51: 0000:00:0d.0 (rev a1) UDMA133 controller
>[   13.656149] NFORCE-MCP51: IDE port disabled
>[   13.656312]     ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:DMA, hdd:pio
>[   13.656663] Probing IDE interface ide1...
>[   14.922448] hdc: TSSTcorpCD/DVDW SN-S082D, ATAPI CD/DVD-ROM drive
>[   14.922735] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
>[   14.923461] hdc: UDMA/33 mode selected
>[   14.924484] ide1 at 0x170-0x177,0x376 on irq 15
>[   14.957450] Probing IDE interface ide0...
>[   15.476421] SCSI subsystem initialized
>[   15.482369] Driver 'sd' needs updating - please use bus_type methods
>[   15.495176] libata version 3.00 loaded.
>[   15.504107] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
>[   15.504583] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
>[   15.504766] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 16
>[   15.505167] PCI: Setting latency timer of device 0000:00:0e.0 to 64
>[   15.505179] ACPI: PCI interrupt for device 0000:00:0e.0 disabled
>[   15.510940] sata_nv 0000:00:0e.0: version 3.5
>[   15.510959] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 16
>[   15.511377] PCI: Setting latency timer of device 0000:00:0e.0 to 64
>[   15.512157] scsi0 : sata_nv
>[   15.513246] scsi1 : sata_nv
>[   15.513592] ata1: SATA max UDMA/133 cmd 0x30b0 ctl 0x30a4 bmdma 0x3090 irq 16
>[   15.513764] ata2: SATA max UDMA/133 cmd 0x30a8 ctl 0x30a0 bmdma 0x3098 irq 16
>[   15.967150] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>[   15.985751] ata1.00: ATA-7: SAMSUNG HM080JI, YC100-09, max UDMA7
>[   15.985920] ata1.00: 156368016 sectors, multi 16: LBA48 NCQ (depth 0/32)
>[   16.006694] ata1.00: configured for UDMA/133
>[   16.319688] ata2: SATA link down (SStatus 0 SControl 300)
>[   16.340832] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM080JI  YC10 PQ: 0 ANSI: 5
>[   16.341209] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
>[   16.341390] sd 0:0:0:0: [sda] Write Protect is off
>[   16.341558] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   16.341573] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   16.341918] sd 0:0:0:0: [sda] 156368016 512-byte hardware sectors (80060 MB)
>[   16.342095] sd 0:0:0:0: [sda] Write Protect is off
>[   16.342263] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>[   16.342277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>[   16.342579]  sda: sda1 sda2 sda3 < sda5 > sda4
>[   16.390991] sd 0:0:0:0: [sda] Attached SCSI disk
>[   16.832419] ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>[   16.832597] ReiserFS: sda2: using ordered data mode
>[   16.855996] ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>[   16.857526] ReiserFS: sda2: checking transaction log (sda2)
>[   16.881502] ReiserFS: sda2: Using r5 hash to sort names
>[   19.645622] fuse init (API version 7.9)
>[   20.484421] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input2
>[   25.169434] device-mapper: uevent: version 1.0.3
>[   25.169461] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
>[   25.327614] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
>[   25.328013] SGI XFS Quota Management subsystem
>[   25.476454] XFS mounting filesystem sda5
>[   25.610514] Ending clean XFS mount for filesystem: sda5
>[   31.981607] ath_hal: module license 'Proprietary' taints kernel.
>[   31.982368] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>[   31.997993] wlan: 0.9.4
>[   32.003077] ath_pci: 0.9.4
>[   32.003138] ACPI: PCI Interrupt 0000:04:08.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>[   32.590095] ath_rate_sample: 1.2 (0.9.4)
>[   32.590547] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>[   32.590553] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>[   32.590565] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>[   32.590569] wifi0: mac 7.8 phy 4.5 radio 5.6
>[   32.590574] wifi0: Use hw queue 1 for WME_AC_BE traffic
>[   32.590576] wifi0: Use hw queue 0 for WME_AC_BK traffic
>[   32.590578] wifi0: Use hw queue 2 for WME_AC_VI traffic
>[   32.590580] wifi0: Use hw queue 3 for WME_AC_VO traffic
>[   32.590582] wifi0: Use hw queue 8 for CAB traffic
>[   32.590584] wifi0: Use hw queue 9 for beacons
>[   32.598309] wifi0: Atheros 5212: mem=0xc3010000, irq=10
>[   33.417912] NET: Registered protocol family 17
>[   33.545065] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>[   33.545383] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
>[   33.545395] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 22 (level, high) -> IRQ 17
>[   33.545403] PCI: Setting latency timer of device 0000:00:14.0 to 64
>[   34.057592] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:90:f5:38:8d:e0
>[   34.057597] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
>[   34.124931] eth0: no link during initialization.
>[   37.155982] Bluetooth: Core ver 2.11
>[   37.159753] NET: Registered protocol family 31
>[   37.159757] Bluetooth: HCI device and connection manager initialized
>[   37.159762] Bluetooth: HCI socket layer initialized
>[   37.185972] Bluetooth: L2CAP ver 2.9
>[   37.185976] Bluetooth: L2CAP socket layer initialized
>[   37.272842] Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>[   37.272847] Bluetooth: BNEP filters: protocol multicast
>[   37.307930] Bridge firewalling registered
>[   37.308077] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>[   37.362155] Bluetooth: SCO (Voice Link) ver 0.5
>[   37.362159] Bluetooth: SCO socket layer initialized
>[   42.179515] hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
>[   42.179523] Uniform CD-ROM driver Revision: 3.20
>[   47.381396] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>[   47.381447] KQEMU installed, max_locked_mem=225192kB.
>[   47.550536] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>[   47.550550] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 18
>[   47.550575] PCI: Setting latency timer of device 0000:00:10.1 to 64
>[   47.557452] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...

Actions: View

Attachments on bug 22854: 4233