Attachment 4369 Details for Bug 23401 – dmesg

dmesg

dmesg (text/plain), 15.08 KB, created by Герман Иванов on 2010-04-28 21:02:30 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Герман Иванов

Created: 2010-04-28 21:02:30 MSD

Size: 15.08 KB

patch

obsolete

>, 20cf]
>PCI: 0000:00:1f.2 reg 18 io port: [20b0, 20b7]
>PCI: 0000:00:1f.2 reg 1c io port: [20c8, 20cb]
>PCI: 0000:00:1f.2 reg 20 io port: [20a0, 20af]
>PCI: 0000:00:1f.2 reg 24 32bit mmio: [e0284000, e02843ff]
>pci 0000:00:1f.2: PME# supported from D3hot
>pci 0000:00:1f.2: PME# disabled
>PCI: 0000:00:1f.3 reg 20 io port: [2000, 201f]
>PCI: 0000:01:00.0 reg 10 io port: [1000, 10ff]
>PCI: 0000:01:00.0 reg 18 64bit mmio: [e0010000, e0010fff]
>PCI: 0000:01:00.0 reg 20 64bit mmio: [e0000000, e000ffff]
>PCI: 0000:01:00.0 reg 30 32bit mmio: [fffe0000, ffffffff]
>pci 0000:01:00.0: supports D1
>pci 0000:01:00.0: supports D2
>pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:01:00.0: PME# disabled
>PCI: bridge 0000:00:1c.0 io port: [1000, 1fff]
>PCI: bridge 0000:00:1c.0 64bit mmio pref: [e0000000, e00fffff]
>pci 0000:00:1e.0: transparent bridge
>bus 00 -> node 0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 12 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
>system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:01: iomem range 0xc0000-0xdffff could not be reserved
>system 00:01: iomem range 0xe0000-0xfffff could not be reserved
>system 00:01: iomem range 0xfff00000-0xffffffff could not be reserved
>system 00:06: ioport range 0x500-0x53f has been reserved
>system 00:06: ioport range 0x400-0x47f has been reserved
>system 00:06: ioport range 0x680-0x6ff has been reserved
>pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
>pci 0000:00:1c.0:   MEM window: 0x30000000-0x300fffff
>pci 0000:00:1c.0:   PREFETCH window: 0x000000e0000000-0x000000e00fffff
>pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>pci 0000:00:1c.1:   IO window: disabled
>pci 0000:00:1c.1:   MEM window: disabled
>pci 0000:00:1c.1:   PREFETCH window: disabled
>pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
>pci 0000:00:1c.2:   IO window: disabled
>pci 0000:00:1c.2:   MEM window: disabled
>pci 0000:00:1c.2:   PREFETCH window: disabled
>pci 0000:00:1c.3: PCI bridge, secondary bus 0000:04
>pci 0000:00:1c.3:   IO window: disabled
>pci 0000:00:1c.3:   MEM window: disabled
>pci 0000:00:1c.3:   PREFETCH window: disabled
>pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:1e.0:   IO window: disabled
>pci 0000:00:1e.0:   MEM window: disabled
>pci 0000:00:1e.0:   PREFETCH window: disabled
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>pci 0000:00:1c.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
>pci 0000:00:1c.0: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>pci 0000:00:1c.1: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:1c.1: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
>pci 0000:00:1c.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>pci 0000:00:1c.2: setting latency timer to 64
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>pci 0000:00:1c.3: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:1c.3: setting latency timer to 64
>pci 0000:00:1e.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffff]
>bus: 01 index 0 io port: [1000, 1fff]
>bus: 01 index 1 mmio: [30000000, 300fffff]
>bus: 01 index 2 mmio: [e0000000, e00fffff]
>bus: 01 index 3 mmio: [0, 0]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [0, 0]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [0, 0]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [0, 0]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 mmio: [0, 0]
>bus: 05 index 1 mmio: [0, 0]
>bus: 05 index 2 mmio: [0, 0]
>bus: 05 index 3 io port: [0, ffff]
>bus: 05 index 4 mmio: [0, ffffffff]
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Unpacking initramfs... done
>Freeing initrd memory: 1331k freed
>msgmni has been set to 977
>io scheduler noop registered
>io scheduler deadline registered (default)
>pci 0000:00:02.0: Boot video device
>Switched to high resolution mode on CPU 0
>pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
>pcieport-driver 0000:00:1c.0: setting latency timer to 64
>pcieport-driver 0000:00:1c.0: found MSI capability
>pci_express 0000:00:1c.0:pcie00: allocate port service
>pci_express 0000:00:1c.0:pcie02: allocate port service
>pci_express 0000:00:1c.0:pcie03: allocate port service
>pcieport-driver 0000:00:1c.1: setting latency timer to 64
>pcieport-driver 0000:00:1c.1: found MSI capability
>pci_express 0000:00:1c.1:pcie00: allocate port service
>pci_express 0000:00:1c.1:pcie02: allocate port service
>pci_express 0000:00:1c.1:pcie03: allocate port service
>pcieport-driver 0000:00:1c.2: setting latency timer to 64
>pcieport-driver 0000:00:1c.2: found MSI capability
>pci_express 0000:00:1c.2:pcie00: allocate port service
>pci_express 0000:00:1c.2:pcie02: allocate port service
>pci_express 0000:00:1c.2:pcie03: allocate port service
>pcieport-driver 0000:00:1c.3: setting latency timer to 64
>pcieport-driver 0000:00:1c.3: found MSI capability
>pci_express 0000:00:1c.3:pcie00: allocate port service
>pci_express 0000:00:1c.3:pcie02: allocate port service
>pci_express 0000:00:1c.3:pcie03: allocate port service
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
>ACPI: Sleep Button (CM) [SLPB]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing disabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP cubic registered
>Using IPI Shortcut mode
>IP-Config: No network devices available.
>Freeing unused kernel memory: 180k freed
>r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>r8169 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>r8169 0000:01:00.0: setting latency timer to 64
>r8169 0000:01:00.0: unknown MAC (27e00600)
>r8169 0000:01:00.0: no MSI. Back to INTx.
>eth0: RTL8169 at 0xcf820000, 00:27:0e:04:82:85, XID 24e00000 IRQ 11
>RPC: Registered udp transport module.
>RPC: Registered tcp transport module.
>NET: Registered protocol family 17
>r8169: eth0: link up
>No dock devices found.
>i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:1d.0: setting latency timer to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 10, io base 0x00002080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>SCSI subsystem initialized
>Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
>Monitor-Mwait will be used to enter C-1 state
>processor ACPI0007:00: registered as cooling_device0
>ACPI: Processor [CPU0] (supports 8 throttling states)
>libata version 3.00 loaded.
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.27-tmc-tc-alt9 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1d.0
>uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.1: setting latency timer to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00002060
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.27-tmc-tc-alt9 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1d.1
>uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 9 (level, low) -> IRQ 9
>uhci_hcd 0000:00:1d.2: setting latency timer to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 9, io base 0x00002040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>usb 1-1: configuration #1 chosen from 1 choice
>usb 1-1: New USB device found, idVendor=099a, idProduct=610c
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB Multimedia Keyboard 
>usb 1-1: Manufacturer:  
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.27-tmc-tc-alt9 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1d.2
>uhci_hcd 0000:00:1d.3: PCI INT D -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:1d.3: setting latency timer to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00002020
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.27-tmc-tc-alt9 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.3
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
>HDA Intel 0000:00:1b.0: PCI INT A -> Link[LNKG] -> GSI 9 (level, low) -> IRQ 9
>HDA Intel 0000:00:1b.0: setting latency timer to 64
>hda_codec: Unknown model for ALC662, trying auto-probe from BIOS...
>ehci_hcd 0000:00:1d.7: PCI INT A -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:1d.7: setting latency timer to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>ehci_hcd 0000:00:1d.7: irq 10, io mem 0xe0284400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: EHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.27-tmc-tc-alt9 ehci_hcd
>usb usb5: SerialNumber: 0000:00:1d.7
>ata_piix 0000:00:1f.2: version 2.12
>ata_piix 0000:00:1f.2: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ata_piix 0000:00:1f.2: setting latency timer to 64
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: SATA max UDMA/133 cmd 0x20b8 ctl 0x20cc bmdma 0x20a0 irq 11
>ata2: SATA max UDMA/133 cmd 0x20b0 ctl 0x20c8 bmdma 0x20a8 irq 11
>usb 1-2: device not accepting address 3, error -71
>hub 1-0:1.0: unable to enumerate USB device on port 2
>usb 1-1: USB disconnect, address 2
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>Uniform Multi-Platform E-IDE driver
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>usb 5-6: New USB device found, idVendor=0930, idProduct=6544
>usb 5-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 5-6: Product: DataTraveler 2.0
>usb 5-6: Manufacturer: Kingston
>usb 5-6: SerialNumber: 001AA0A06E88C8C1256100AB
>Initializing USB Mass Storage driver...
>usb 1-1: new low speed USB device using uhci_hcd and address 5
>usb 1-1: configuration #1 chosen from 1 choice
>input:   USB Multimedia Keyboard  as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input3
>input: USB HID v1.00 Keyboard [  USB Multimedia Keyboard ] on usb-0000:00:1d.0-1
>input:   USB Multimedia Keyboard  as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.1/input/input4
>input: USB HID v1.00 Device [  USB Multimedia Keyboard ] on usb-0000:00:1d.0-1
>usb 1-1: New USB device found, idVendor=099a, idProduct=610c
>usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-1: Product: USB Multimedia Keyboard 
>usb 1-1: Manufacturer:  
>usb 1-2: new low speed USB device using uhci_hcd and address 6
>usb 1-2: configuration #1 chosen from 1 choice
>input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.0/input/input5
>input: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-2
>usb 1-2: New USB device found, idVendor=09da, idProduct=000a
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 1-2: Product: PS/2+USB Mouse
>usb 1-2: Manufacturer: A4Tech
>scsi2 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning

Actions: View

Attachments on bug 23401: 4367 | 4368 | 4369