Linux version 2.4.26-std-up-alt4 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Mon Jun 21 01:50:56 MSD 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable) BIOS-e820: 000000000f7f0000 - 000000000f800000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 247MB LOWMEM available. found SMP MP-table at 000f9bf0 hm, page 000f9000 reserved twice. hm, page 000fa000 reserved twice. hm, page 000ed000 reserved twice. hm, page 000ee000 reserved twice. On node 0 totalpages: 63472 zone(0): 4096 pages. zone(1): 59376 pages. zone(2): 0 pages. DMI 2.3 present. 46 structures occupying 1338 bytes. DMI table at 0x000F811F. BIOS Vendor: Compaq BIOS Version: 686O2 v3.12 BIOS Release: 10/30/2002 System Vendor: Compaq Product Name: Evo D310 Version: Serial Number: 6S31LB5ZR0EL Board Vendor: Compaq Board Name: 0804h Board Version: ACPI: RSDP (v000 COMPAQ ) @ 0x000eaa10 ACPI: RSDT (v001 COMPAQ CPQ0053 0x20021030 0x00000000) @ 0x000e6740 ACPI: FADT (v001 COMPAQ BROOKDG 0x00000001 0x00000000) @ 0x000e67f8 ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @ 0x000e7447 ACPI: SSDT (v001 COMPAQ CORE_PNP 0x00000001 MSFT 0x0100000e) @ 0x000e7b97 ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000e) @ 0x000e80d1 ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000e) @ 0x000e826c ACPI: SSDT (v001 COMPAQ LGCYLITE 0x00000001 MSFT 0x0100000e) @ 0x000e8574 ACPI: SSDT (v001 COMPAQ UART2 0x00000001 MSFT 0x0100000e) @ 0x000e8ab3 ACPI: SSDT (v001 COMPAQ FLOPPY 0x00000001 MSFT 0x0100000e) @ 0x000e8c1a ACPI: MADT (v001 COMPAQ BROOKDG 0x00000001 0x00000000) @ 0x000e686c ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000e) @ 0x000ea6df ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e91d6 ACPI: SSDT (v001 COMPAQ UR2_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e95fa ACPI: SSDT (v001 COMPAQ FPY_PRSS 0x00000001 MSFT 0x0100000e) @ 0x000e9767 ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000e) @ 0x000e9918 ACPI: SSDT (v001 COMPAQ CORE_S3 0x00000001 MSFT 0x0100000e) @ 0x000e9a4d ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000e) @ 0x000e9b88 ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000e) @ 0x000e9e73 ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000e) @ 0x000e9cfb ACPI: SSDT (v001 COMPAQ GTF2 0x00000001 MSFT 0x0100000e) @ 0x000ea178 ACPI: SSDT (v001 COMPAQ L08 0x00000001 MSFT 0x0100000e) @ 0x000ea482 ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000e) @ 0x000ea87a ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 8 IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information Kernel command line: root=/dev/hda5 vga=788 Initializing CPU#0 Detected 2391.477 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 248200k/253888k available (1235k kernel code, 5300k reserved, 508k data, 136k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 8-0, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2391.5730 MHz. ..... host bus clock speed is 132.8649 MHz. cpu: 0, clocks: 1328649, slice: 664324 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.20 entry at 0xeca98, last bus=5 PCI: Using configuration type 1 Looking for DSDT in initrd ... not found! ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] PCI: Probing PCI hardware 00:00:1f[A] -> 8-18 -> IRQ 18 level low 00:00:1f[B] -> 8-17 -> IRQ 17 level low 00:00:1d[A] -> 8-16 -> IRQ 16 level low 00:00:1d[B] -> 8-19 -> IRQ 19 level low 00:00:1d[D] -> 8-23 -> IRQ 23 level low 00:05:04[C] -> 8-21 -> IRQ 21 level low 00:05:04[D] -> 8-22 -> IRQ 22 level low 00:05:08[A] -> 8-20 -> IRQ 20 level low number of MP IRQ sources: 15. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 B9 11 001 01 1 1 0 1 0 1 1 B1 12 001 01 1 1 0 1 0 1 1 A9 13 001 01 1 1 0 1 0 1 1 C1 14 001 01 1 1 0 1 0 1 1 E1 15 001 01 1 1 0 1 0 1 1 D1 16 001 01 1 1 0 1 0 1 1 D9 17 001 01 1 1 0 1 0 1 1 C9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd kinoded started VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xf0000000, mapped to 0xd0000000, size 1875k vesafb: mode is 800x600x16, linelength=1600, pages=7 vesafb: protected mode interface info at a5f3:1f5f vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 22172 bytes, v2). Console: switching to colour frame buffer device 82x26 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 PCI: Enabling device 00:1f.1 (0005 -> 0007) ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x24a0-0x24a7, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x24a8-0x24af, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 2F040J0, ATA DISK drive blk: queue c03039e0, I/O limit 4095Mb (mask 0xffffffff) hdc: LTN486S, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Partition check: hda: hda1 hda2 hda3 < hda5 > hda2: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 121k freed VFS: Mounted root (romfs filesystem) readonly. Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 136k freed Executing init=/sbin/init EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal Real Time Clock Driver v1.10f Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected an Intel(R) 845G Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1, 8 throttling states) ACPI: Processor [CPU1] (supports C1, 8 throttling states) MSDOS FS: IO charset koi8-r MSDOS FS: Using codepage 866