Attachment 5447 Details for Bug 27240 – Вывод lspci -vv

Вывод lspci -vv

lspci (text/plain), 20.67 KB, created by Gennadij Redko on 2012-04-18 13:40:56 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Gennadij Redko

Created: 2012-04-18 13:40:56 MSK

Size: 20.67 KB

patch

obsolete

>00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR+ <PERR- INTx-
>	Latency: 32
>	Kernel modules: ati-agp
>
>00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Graphics Port 0) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 00001000-00001fff
>	Memory behind bridge: c2000000-c51fffff
>	Prefetchable memory behind bridge: 00000000a0000000-00000000c01fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #  2, PowerLimit 75.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd Off, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4129
>	Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 12ff
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
>		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- onfig- - - TableOffset=0
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 3) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
>	Memory behind bridge: c0200000-c04fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
>			ExtTag+ RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep+ BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #  6, PowerLimit 25.000000; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd Off, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
>		Address: fee0300c  Data: 4141
>	Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 12ff
>	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
>		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- onfig- - - TableOffset=0
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Kernel driver in use: pcieport
>	Kernel modules: shpchp
>
>00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
>	Subsystem: Hewlett-Packard Company Device 2812
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 2100 [size=16]
>	Region 5: Memory at c0509000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: ahci
>	Kernel modules: ahci
>
>00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at c0504000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at c0505000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at c0506000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 17
>	Region 0: Memory at c0507000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) (prog-if 10 [OHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 18
>	Region 0: Memory at c0508000 (32-bit, non-prefetchable) [size=4K]
>	Kernel driver in use: ohci_hcd
>	Kernel modules: ohci-hcd
>
>00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin D routed to IRQ 19
>	Region 0: Memory at c0509400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>	Capabilities: [e4] Debug port: BAR=1 offset=00e0
>	Kernel driver in use: ehci_hcd
>	Kernel modules: ehci-hcd
>
>00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13)
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Region 0: I/O ports at fc00 [size=16]
>	Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
>	Kernel driver in use: piix4_smbus
>	Kernel modules: sp5100_tco, i2c-piix4
>
>00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at 2140 [size=8]
>	Region 1: I/O ports at 2158 [size=4]
>	Region 2: I/O ports at 2148 [size=8]
>	Region 3: I/O ports at 215c [size=4]
>	Region 4: I/O ports at 2120 [size=16]
>	Kernel driver in use: pata_atiixp
>	Kernel modules: pata_atiixp
>
>00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at c0500000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Kernel driver in use: HDA Intel
>	Kernel modules: snd-hda-intel
>
>00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>
>00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 64
>	Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Revision ID: 1.02
>		Link Frequency: 1.0GHz
>		Link Error: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Capabilities: [f0] Secure device <?>
>	Kernel modules: k8temp
>
>02:00.0 VGA compatible controller: nVidia Corporation G84 [Quadro FX 1700] (rev a1) (prog-if 00 [VGA controller])
>	Subsystem: nVidia Corporation Device 049a
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 18
>	Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at a0000000 (64-bit, prefetchable) [size=512M]
>	Region 3: Memory at c2000000 (64-bit, non-prefetchable) [size=32M]
>	Region 5: I/O ports at 1100 [size=128]
>	[virtual] Expansion ROM at c0000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express (v2) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
>		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- onfig- - - TableOffset=0
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [128 v1] Power Budgeting <?>
>	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
>	Kernel driver in use: nvidia
>	Kernel modules: nvidia, nvidiafb
>
>3f:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755 Gigabit Ethernet PCI Express (rev 02)
>	Subsystem: Hewlett-Packard Company Device 12ff
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 42
>	Region 0: Memory at c0400000 (64-bit, non-prefetchable) [size=64K]
>	Expansion ROM at <ignored> [disabled]
>	Capabilities: [48] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>		Product Name: Broadcom NetXtreme Gigabit Ethernet Controller
>		Read-only fields:
>			[PN] Part number: BCM95755
>			[EC] Engineering changes: 106679-15
>			[SN] Serial number: 0123456789
>			[MN] Manufacture ID: 31 34 65 34
>			[RV] Reserved: checksum good, 28 byte(s) reserved
>		Read/write fields:
>			[YA] Asset tag: XYZ01234567
>			[RW] Read-write area: 107 byte(s) free
>		End
>	Capabilities: [58] Vendor Specific Information: Len=78 <?>
>	Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee0300c  Data: 4171
>	Capabilities: [d0] Express (v1) Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 4096 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
>			ClockPM- Surprise- LLActRep- BwNot-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>	Capabilities: [100 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>	Capabilities: [13c v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntrySize=0
>		Arb:	Fixed- WRR32- WRR64- WRR128- 100ns- onfig- - - TableOffset=0
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Fixed- RR32-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [160 v1] Device Serial Number 00-1c-c4-ff-fe-98-78-bd
>	Capabilities: [16c v1] Power Budgeting <?>
>	Kernel driver in use: tg3
>	Kernel modules: tg3
>

Actions: View

Attachments on bug 27240: 5447