Attachment 762 Details for Bug 6185 – dmesg from A7Wide

dmesg from A7Wide

dmesg.a7wide.txt (text/plain), 15.10 KB, created by Mikhail Yakshin on 2005-03-01 19:24:45 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Mikhail Yakshin

Created: 2005-03-01 19:24:45 MSK

Size: 15.10 KB

patch

obsolete

>HighMem zone: 0 pages, LIFO batch:1
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7770
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1fef4b7f
>ACPI: FADT (v001 SiS    746      0x06040000 PTL  0x000f4240) @ 0x1fefaf8c
>ACPI: DSDT (v001 PTLTD       746 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x8008
>Built 1 zonelists
>Kernel command line: ramdisk_size=64000 initrd=alt0/full.cz root=/dev/ram3 vga=791 changedisk fbeginner automatic=method:nfs,network:dhcp,server:10.0.0.2,directory:/raid/inquisitor BOOT_IMAGE=alt0/vmlinuz BASH
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01404000)
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 666.930 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512404k/523200k available (1622k kernel code, 10148k reserved, 744k data, 176k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay loop... 1323.00 BogoMIPS (lpj=661504)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff c1cbf9ff 00000000 00000000 00000000 00000000
>CPU: CLK_CTL MSR was 60079263. Reprogramming to 20079263
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f9ff c1cbf9ff 00000000 00000020 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Mobile AMD Athlon(tm) XP 2500+ stepping 00
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>ACPI: Looking for DSDT in initrd... not found!
> tbxface-0118 [02] acpi_load_tables      : ACPI Tables successfully acquired
>Parsing all Control Methods:...................................................................................................................................
>Table [DSDT](id F004) - 504 Objects with 45 Devices 131 Methods 13 Regions
>ACPI Namespace successfully loaded at root c03a0be0
>ACPI: setting ELCR to 0800 (from 0420)
>evxfevnt-0094 [03] acpi_enable           : Transition to ACPI mode successful
>checking if image is initramfs... it is
>Freeing initrd memory: 2838k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xfd9c6, last bus=1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20041105
>evgpeblk-0979 [06] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0xB
>evgpeblk-0987 [06] ev_create_gpe_block   : Found 7 Wake, Enabled 1 Runtime GPEs in this block
>evgpeblk-0979 [06] ev_create_gpe_block   : GPE 20 to 2F [_GPE] 2 regs on int 0xB
>evgpeblk-0987 [06] ev_create_gpe_block   : Found 0 Wake, Enabled 1 Runtime GPEs in this block
>Completing Region/Field/Buffer/Package initialization:................................................................................................
>Initialized 13/13 Regions 5/5 Fields 33/33 Buffers 45/52 Packages (513 nodes)
>Executing all Device _STA and_INI methods:.................................................
>49 Devices found containing: 49 _STA, 2 _INI methods
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>nsxfeval-0250 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0250 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0250 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>nsxfeval-0250 [06] acpi_evaluate_object  : Handle is NULL and Pathname is relative
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS963 that hid as a SIS503 (compatible=0)
>Enabling SiS 96x SMBus.
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 9 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKF] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *0, disabled.
>ACPI: Power Resource [PFAN] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>acpi_bus-0081 [03] acpi_bus_get_device   : Error getting context for object [dfe8e488]
>acpi_bus-0081 [03] acpi_bus_get_device   : Error getting context for object [dfe8e188]
>pnp: PnP ACPI: found 8 devices
>PnPBIOS: Disabled by ACPI
>PCI: Using ACPI for IRQ routing
>** PCI interrupts are no longer routed automatically.  If this
>** causes a device to stop working, it is probably because the
>** driver failed to call pci_enable_device().  As a temporary
>** workaround, the "pci=routeirq" argument restores the old
>** behavior.  If this argument makes the device work again,
>** please email the output of "lspci" to bjorn.helgaas@hp.com
>** so I can fix the driver.
>pnp: 00:03: ioport range 0x8000-0x808f could not be reserved
>pnp: 00:03: ioport range 0x8090-0x80ff has been reserved
>pnp: 00:03: ioport range 0x8100-0x811f has been reserved
>pnp: 00:03: ioport range 0x480-0x48f has been reserved
>pnp: 00:03: ioport range 0x4d0-0x4d1 has been reserved
>audit: initializing netlink socket (disabled)
>audit(1109700833.007:0): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>vesafb: framebuffer at 0xe8000000, mapped to 0xe0880000, using 3072k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=41
>vesafb: protected mode interface info at c000:5539
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP: routing cache hash table of 4096 buckets, 32Kbytes
>TCP: Hash tables configured (established 32768 bind 65536)
>NET: Registered protocol family 1
>ACPI wakeup devices: 
> LID USB0 USB1 USB2 USB3 MDM0 ENET 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 176k freed
>Executing init=/init
>sis900.c: v1.08.07 11/02/2003
>PCI: Enabling device 0000:00:04.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 9 (level, low) -> IRQ 9
>divert: allocating divert_blk for eth0
>eth0: Realtek RTL8201 PHY transceiver found at address 31.
>eth0: Using transceiver found at address 31 as default
>eth0: SiS 900 PCI Fast Ethernet at 0xf800, IRQ 9, 00:40:ca:c8:ac:96.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
>ehci_hcd 0000:00:03.3: irq 5, pci mem 0xe0004000
>ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
>PCI: cache line size of 64 is not supported by device 0000:00:03.3
>ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 6 ports detected
>ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
>ohci_hcd 0000:00:03.0: irq 5, pci mem 0xe0001000
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
>ohci_hcd 0000:00:03.1: irq 5, pci mem 0xe0002000
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
>ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 5 (level, low) -> IRQ 5
>ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
>ohci_hcd 0000:00:03.2: irq 5, pci mem 0xe0003000
>ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 3-2: new full speed USB device using ohci_hcd and address 2
>usbcore: registered new driver usbnet
>NET: Registered protocol family 17
>eth0: Media Link On 100mbps full-duplex 
>nfs warning: mount version older than kernel
>Registering unionfs version $Id: main.c,v 1.82 2005/02/08 15:17:38 cwright Exp $
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Probing IDE interface ide0...
>hda: FUJITSU MHT2020AT, ATA DISK drive
>Probing IDE interface ide1...
>hdc: ASUS SCB-2424, ATAPI CD/DVD-ROM drive
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>elevator: using anticipatory as default io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 39070080 sectors (20003 MB) w/2048KiB Cache, CHS=38760/16/63
>hda: cache flushes supported
> hda: hda1 hda2 < hda5 hda6 >
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ACPI: Processor [CPU0] (supports C1 C2)
>ACPI: Thermal Zone [THRM] (55 C)
>powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
>powernow: No PST tables match this cpuid (0x7a0)
>powernow: This is indicative of a broken BIOS.
>powernow: Trying ACPI perflib
>powernow: Minimum speed 238 MHz. Maximum speed 666 MHz.
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>Real Time Clock Driver v1.12
>input: PC Speaker
>Synaptics Touchpad, model: 1
> Firmware: 5.1
> 180 degree mounted touchpad
> Sensor: 15
> new absolute packet format
> Touchpad has extended capability bits
> -> four buttons
> -> multifinger detection
> -> palm detection
>input: SynPS/2 Synaptics TouchPad on isa0060/serio4
>ts: Compaq touchscreen protocol output
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>Linux agpgart interface v0.100 (c) Dave Jones
>agpgart: Detected SiS 746 chipset
>agpgart: Maximum main memory to use for agp memory: 438M
>agpgart: AGP aperture is 128M @ 0xd8000000
>cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: shpc_init : shpc_cap_offset == 0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>  Vendor: ICSI      Model: IC1100            Rev: 3.1F
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>i2c-sis96x version 1.0.0
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
>Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
>  Vendor: ICSI      Model: IC1100            Rev: 3.1F
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
>  Vendor: ICSI      Model: IC1100            Rev: 3.1F
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2
>usb-storage: device scan complete
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
>PCI: Enabling device 0000:00:02.3 (0000 -> 0002)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI interrupt 0000:00:02.3[B] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: Unexpected PCI resource length of 1000!
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[e0000000-e00007ff]  Max Packet=[2048]
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 10 (level, low) -> IRQ 10
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>SIS5513: port 0x01f0 already claimed by ide0
>SIS5513: port 0x0170 already claimed by ide1
>SIS5513: neither IDE port enabled (BIOS)
>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca01260004ed]
>PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:02.6[C] -> GSI 10 (level, low) -> IRQ 10
>Linux Kernel Card Services
>  options:  [pci] [cardbus] [pm]
>ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
>Yenta: CardBus bridge found at 0000:00:0c.0 [1509:2750]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0c.0, mfunc 0x01021c02, devctl 0x44
>Yenta: ISA IRQ mask 0x0000, PCI irq 10
>Socket status: 30000006
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Lid Switch [LID]
>ACPI: Fan [FAN] (on)
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
>[fglrx] AGP detected, AgpState   = 0x1f004e1b (hardware caps of chipset)
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: SiS delay workaround: giving bridge time to recover.
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>[fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
>[fglrx] free  AGP = 121909248
>[fglrx] max   AGP = 121909248
>[fglrx] free  LFB = 55570432
>[fglrx] max   LFB = 55570432
>[fglrx] free  Inv = 0
>[fglrx] max   Inv = 0
>[fglrx] total Inv = 0
>[fglrx] total TIM = 0
>[fglrx] total FB  = 0
>[fglrx] total AGP = 32768

Actions: View

Attachments on bug 6185: 759 | 760 | 761 | 762