[ 0.568233] bus: 'platform': really_probe: bound device be-mdio to driver be-mdio [ 0.568283] bus: 'mdio_bus': add driver Marvell 88X2222 [ 0.568322] bus: 'platform': add driver be-xgbe [ 0.568358] bus: 'platform': driver_probe_device: matched device 1f054000.eth0 with driver be-xgbe [ 0.568364] bus: 'platform': really_probe: probing driver be-xgbe with device 1f054000.eth0 [ 0.568374] devices_kset: Moving 1f054000.eth0 to end of list [ 0.882396] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 0.882540] ata1.00: ATA-9: nanoSSD 3SE, S141002C, max UDMA/133 [ 0.882546] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 0.882689] ata1.00: configured for UDMA/133 [ 0.883062] scsi 0:0:0:0: Direct-Access ATA nanoSSD 3SE 002C PQ: 0 ANSI: 5 [ 0.883147] device: 'target0:0:0': device_add [ 0.883163] bus: 'scsi': add device target0:0:0 [ 0.883188] PM: Adding info for scsi:target0:0:0 [ 0.883215] device: '0:0:0:0': device_add [ 0.883289] bus: 'scsi': add device 0:0:0:0 [ 0.883309] PM: Adding info for scsi:0:0:0:0 [ 0.883323] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd [ 0.883328] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0 [ 0.883337] devices_kset: Moving 0:0:0:0 to end of list [ 0.883358] device: '0:0:0:0': device_add [ 0.883413] PM: Adding info for No Bus:0:0:0:0 [ 0.883428] driver: 'sd': driver_bound: bound to device '0:0:0:0' [ 0.883432] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd [ 0.883436] device: '0:0:0:0': device_add [ 0.883466] PM: Adding info for No Bus:0:0:0:0 [ 0.883491] device: 'sg0': device_add [ 0.883525] PM: Adding info for No Bus:sg0 [ 0.883762] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 0.883886] sd 0:0:0:0: [sda] Write Protect is off [ 0.883893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.883948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.883961] device: '8:0': device_add [ 0.884002] PM: Adding info for No Bus:8:0 [ 0.884020] device: 'sda': device_add [ 0.884074] PM: Adding info for No Bus:sda [ 0.884169] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.884179] device: '0:0:0:0': device_add [ 0.884216] PM: Adding info for No Bus:0:0:0:0 [ 0.884804] sda: sda1 [ 0.884823] device: 'sda1': device_add [ 0.884871] PM: Adding info for No Bus:sda1 [ 0.885383] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.232395] ata2: SATA link down (SStatus 0 SControl 310) [ 20.562470] device: 'eth0': device_add [ 20.562619] PM: Adding info for No Bus:eth0 [ 20.563085] device: 'ptp0': device_add [ 20.563139] PM: Adding info for No Bus:ptp0 [ 20.563212] be-xgbe 1f054000.eth0 eth0: net device enabled [ 20.563217] driver: 'be-xgbe': driver_bound: bound to device '1f054000.eth0' [ 20.563223] bus: 'platform': really_probe: bound device 1f054000.eth0 to driver be-xgbe [ 20.563299] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 20.563303] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 20.563310] bus: 'pci': add driver e1000 [ 20.563353] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 20.563356] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 20.563361] bus: 'pci': add driver e1000e [ 20.563397] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k [ 20.563400] ixgbe: Copyright (c) 1999-2015 Intel Corporation. [ 20.563404] bus: 'pci': add driver ixgbe [ 20.563438] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k [ 20.563442] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 20.563445] bus: 'pci': add driver ixgbevf [ 20.563480] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 20.563483] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 20.563486] bus: 'pci': add driver ixgb [ 20.563533] bus: 'platform': add driver baikal-dwmac [ 20.563563] bus: 'platform': driver_probe_device: matched device 1f05e000.eth1 with driver baikal-dwmac [ 20.563568] bus: 'platform': really_probe: probing driver baikal-dwmac with device 1f05e000.eth1 [ 20.563579] devices_kset: Moving 1f05e000.eth1 to end of list [ 20.563632] baikal-dwmac 1f05e000.eth1: Baikal Electronics DWMAC glue driver [ 20.563672] baikal-dwmac 1f05e000.eth1: no reset control found [ 20.563676] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 20.563679] Ring mode enabled [ 20.563682] DMA HW capability register supported [ 20.563686] Enhanced/Alternate descriptors [ 20.563689] Enabled extended descriptors [ 20.563692] RX Checksum Offload Engine supported (type 2) [ 20.563695] TX Checksum insertion supported [ 20.563697] Wake-Up On Lan supported [ 20.563722] Enable RX Mitigation via HW Watchdog Timer [ 20.563731] device: 'stmmac-0': device_add [ 20.563762] PM: Adding info for No Bus:stmmac-0 [ 20.563778] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth1@1F05E000[0]' [ 20.568623] device: 'stmmac-0:03': device_add [ 20.568645] bus: 'mdio_bus': add device stmmac-0:03 [ 20.568678] PM: Adding info for mdio_bus:stmmac-0:03 [ 20.568712] bus: 'mdio_bus': driver_probe_device: matched device stmmac-0:03 with driver Micrel KSZ9031 Gigabit PHY [ 20.568717] bus: 'mdio_bus': really_probe: probing driver Micrel KSZ9031 Gigabit PHY with device stmmac-0:03 [ 20.568727] devices_kset: Moving stmmac-0:03 to end of list [ 20.568732] driver: 'Micrel KSZ9031 Gigabit PHY': driver_bound: bound to device 'stmmac-0:03' [ 20.568737] bus: 'mdio_bus': really_probe: bound device stmmac-0:03 to driver Micrel KSZ9031 Gigabit PHY [ 20.577703] libphy: stmmac: probed [ 20.577710] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-0:03) active [ 20.577738] device: 'eth1': device_add [ 20.577878] PM: Adding info for No Bus:eth1 [ 20.578046] driver: 'baikal-dwmac': driver_bound: bound to device '1f05e000.eth1' [ 20.578052] bus: 'platform': really_probe: bound device 1f05e000.eth1 to driver baikal-dwmac [ 20.578064] bus: 'platform': driver_probe_device: matched device 1f060000.eth2 with driver baikal-dwmac [ 20.578070] bus: 'platform': really_probe: probing driver baikal-dwmac with device 1f060000.eth2 [ 20.578080] devices_kset: Moving 1f060000.eth2 to end of list [ 20.578142] baikal-dwmac 1f060000.eth2: Baikal Electronics DWMAC glue driver [ 20.578179] baikal-dwmac 1f060000.eth2: no reset control found [ 20.578184] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 20.578186] Ring mode enabled [ 20.578189] DMA HW capability register supported [ 20.578193] Enhanced/Alternate descriptors [ 20.578196] Enabled extended descriptors [ 20.578199] RX Checksum Offload Engine supported (type 2) [ 20.578202] TX Checksum insertion supported [ 20.578204] Wake-Up On Lan supported [ 20.578231] Enable RX Mitigation via HW Watchdog Timer [ 20.578240] device: 'stmmac-1': device_add [ 20.578273] PM: Adding info for No Bus:stmmac-1 [ 20.578291] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth2@1F060000[0]' [ 20.582765] device: 'stmmac-1:03': device_add [ 20.582789] bus: 'mdio_bus': add device stmmac-1:03 [ 20.582829] PM: Adding info for mdio_bus:stmmac-1:03 [ 20.582864] bus: 'mdio_bus': driver_probe_device: matched device stmmac-1:03 with driver Micrel KSZ9031 Gigabit PHY [ 20.582869] bus: 'mdio_bus': really_probe: probing driver Micrel KSZ9031 Gigabit PHY with device stmmac-1:03 [ 20.582880] devices_kset: Moving stmmac-1:03 to end of list [ 20.582884] driver: 'Micrel KSZ9031 Gigabit PHY': driver_bound: bound to device 'stmmac-1:03' [ 20.582889] bus: 'mdio_bus': really_probe: bound device stmmac-1:03 to driver Micrel KSZ9031 Gigabit PHY [ 20.591857] libphy: stmmac: probed [ 20.591864] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-1:03) active [ 20.591890] device: 'eth2': device_add [ 20.592026] PM: Adding info for No Bus:eth2 [ 20.592184] driver: 'baikal-dwmac': driver_bound: bound to device '1f060000.eth2' [ 20.592190] bus: 'platform': really_probe: bound device 1f060000.eth2 to driver baikal-dwmac [ 20.592277] bus: 'platform': add driver stmmaceth [ 20.592370] bus: 'platform': add driver dwc3 [ 20.592445] bus: 'pci': add driver dwc3-pci [ 20.592494] bus: 'platform': add driver baikal-dwc3 [ 20.592506] bus: 'platform': driver_probe_device: matched device 1f04d050.usb with driver baikal-dwc3 [ 20.592511] bus: 'platform': really_probe: probing driver baikal-dwc3 with device 1f04d050.usb [ 20.592521] devices_kset: Moving 1f04d050.usb to end of list [ 20.592619] device: '1f100000.dwc3': device_add [ 20.592631] bus: 'platform': add device 1f100000.dwc3 [ 20.592660] PM: Adding info for platform:1f100000.dwc3 [ 20.592728] bus: 'platform': driver_probe_device: matched device 1f100000.dwc3 with driver dwc3 [ 20.592733] bus: 'platform': really_probe: probing driver dwc3 with device 1f100000.dwc3 [ 20.592740] devices_kset: Moving 1f100000.dwc3 to end of list [ 20.595907] device: '1f100000.dwc3.ulpi': device_add [ 20.595935] bus: 'ulpi': add device 1f100000.dwc3.ulpi [ 20.595961] PM: Adding info for ulpi:1f100000.dwc3.ulpi [ 20.795642] Registering platform device 'xhci-hcd.0.auto'. Parent at 1f100000.dwc3 [ 20.795646] device: 'xhci-hcd.0.auto': device_add [ 20.795656] bus: 'platform': add device xhci-hcd.0.auto [ 20.795682] PM: Adding info for platform:xhci-hcd.0.auto [ 20.795723] driver: 'dwc3': driver_bound: bound to device '1f100000.dwc3' [ 20.795728] bus: 'platform': really_probe: bound device 1f100000.dwc3 to driver dwc3 [ 20.795737] driver: 'baikal-dwc3': driver_bound: bound to device '1f04d050.usb' [ 20.795741] bus: 'platform': really_probe: bound device 1f04d050.usb to driver baikal-dwc3 [ 20.795819] device class 'usbmon': registering [ 20.795846] device: 'usbmon0': device_add [ 20.795876] PM: Adding info for No Bus:usbmon0 [ 20.795957] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 20.795966] ohci-pci: OHCI PCI platform driver [ 20.795974] bus: 'pci': add driver ohci-pci [ 20.796016] ohci-platform: OHCI generic platform driver [ 20.796026] bus: 'platform': add driver ohci-platform [ 20.796091] bus: 'pci': add driver xhci_hcd [ 20.796122] bus: 'platform': add driver xhci-hcd [ 20.796179] bus: 'platform': driver_probe_device: matched device xhci-hcd.0.auto with driver xhci-hcd [ 20.796184] bus: 'platform': really_probe: probing driver xhci-hcd with device xhci-hcd.0.auto [ 20.796193] devices_kset: Moving xhci-hcd.0.auto to end of list [ 20.796222] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 20.796236] device: 'usbmon1': device_add [ 20.796265] PM: Adding info for No Bus:usbmon1 [ 20.796314] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 20.796664] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x00010010 [ 20.796698] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0x1f100000 [ 20.796823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 20.796829] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.796833] usb usb1: Product: xHCI Host Controller [ 20.796838] usb usb1: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd [ 20.796842] usb usb1: SerialNumber: xhci-hcd.0.auto [ 20.796853] device: 'usb1': device_add [ 20.796930] bus: 'usb': add device usb1 [ 20.796972] PM: Adding info for usb:usb1 [ 20.797067] bus: 'usb': driver_probe_device: matched device usb1 with driver usb [ 20.797073] bus: 'usb': really_probe: probing driver usb with device usb1 [ 20.797083] devices_kset: Moving usb1 to end of list [ 20.797116] device: '1-0:1.0': device_add [ 20.797146] bus: 'usb': add device 1-0:1.0 [ 20.797156] PM: Adding info for usb:1-0:1.0 [ 20.797180] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub [ 20.797184] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0 [ 20.797194] devices_kset: Moving 1-0:1.0 to end of list [ 20.797202] hub 1-0:1.0: USB hub found [ 20.797231] hub 1-0:1.0: 1 port detected [ 20.797263] device: 'usb1-port1': device_add [ 20.797287] PM: Adding info for No Bus:usb1-port1 [ 20.797331] driver: 'hub': driver_bound: bound to device '1-0:1.0' [ 20.797336] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub [ 20.797345] device: 'ep_81': device_add [ 20.797381] PM: Adding info for No Bus:ep_81 [ 20.797386] driver: 'usb': driver_bound: bound to device 'usb1' [ 20.797390] bus: 'usb': really_probe: bound device usb1 to driver usb [ 20.797397] device: 'ep_00': device_add [ 20.797430] PM: Adding info for No Bus:ep_00 [ 20.797442] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 20.797454] device: 'usbmon2': device_add [ 20.797482] PM: Adding info for No Bus:usbmon2 [ 20.797526] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 20.797594] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 20.797669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 20.797675] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 20.797679] usb usb2: Product: xHCI Host Controller [ 20.797684] usb usb2: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd [ 20.797688] usb usb2: SerialNumber: xhci-hcd.0.auto [ 20.797698] device: 'usb2': device_add [ 20.797763] bus: 'usb': add device usb2 [ 20.797800] PM: Adding info for usb:usb2 [ 20.797878] bus: 'usb': driver_probe_device: matched device usb2 with driver usb [ 20.797883] bus: 'usb': really_probe: probing driver usb with device usb2 [ 20.797892] devices_kset: Moving usb2 to end of list [ 20.797929] device: '2-0:1.0': device_add [ 20.797956] bus: 'usb': add device 2-0:1.0 [ 20.797971] PM: Adding info for usb:2-0:1.0 [ 20.797993] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub [ 20.797997] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0 [ 20.798005] devices_kset: Moving 2-0:1.0 to end of list [ 20.798012] hub 2-0:1.0: USB hub found [ 20.798034] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 20.803913] hub: probe of 2-0:1.0 rejects match -19 [ 20.803923] device: 'ep_81': device_add [ 20.803959] PM: Adding info for No Bus:ep_81 [ 20.803964] driver: 'usb': driver_bound: bound to device 'usb2' [ 20.803969] bus: 'usb': really_probe: bound device usb2 to driver usb [ 20.803975] device: 'ep_00': device_add [ 20.804008] PM: Adding info for No Bus:ep_00 [ 20.804024] driver: 'xhci-hcd': driver_bound: bound to device 'xhci-hcd.0.auto' [ 20.804029] bus: 'platform': really_probe: bound device xhci-hcd.0.auto to driver xhci-hcd [ 20.804057] bus: 'usb': add driver uas [ 20.804092] usbcore: registered new interface driver uas [ 20.804100] bus: 'usb': add driver usb-storage [ 20.804155] usbcore: registered new interface driver usb-storage [ 20.804167] Registering platform device 'i8042'. Parent at platform [ 20.804171] device: 'i8042': device_add [ 20.804180] bus: 'platform': add device i8042 [ 20.804206] PM: Adding info for platform:i8042 [ 20.804236] bus: 'platform': add driver i8042 [ 20.804255] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042 [ 20.804259] bus: 'platform': really_probe: probing driver i8042 with device i8042 [ 20.804267] devices_kset: Moving i8042 to end of list [ 21.304445] i8042: i8042 controller selftest timeout [ 21.308121] i8042: probe of i8042 rejects match -19 [ 21.308140] bus: 'platform': remove driver i8042 [ 21.308154] driver: 'i8042': driver_release [ 21.308180] bus: 'platform': remove device i8042 [ 21.308184] PM: Removing info for platform:i8042 [ 21.308225] device: 'mice': device_add [ 21.308258] PM: Adding info for No Bus:mice [ 21.308353] device: 'psaux': device_add [ 21.308382] PM: Adding info for No Bus:psaux [ 21.308436] mousedev: PS/2 mouse device common for all mice [ 21.308448] bus: 'i2c': add driver rtc-ab-eoz9-s3 [ 21.308473] bus: 'i2c': driver_probe_device: matched device 1-0056 with driver rtc-ab-eoz9-s3 [ 21.308479] bus: 'i2c': really_probe: probing driver rtc-ab-eoz9-s3 with device 1-0056 [ 21.308488] devices_kset: Moving 1-0056 to end of list [ 21.308590] rtc-ab-eoz9-s3 1-0056: abeoz9s3_i2c_validate_client: could not read register 0 [ 21.315588] rtc-ab-eoz9-s3: probe of 1-0056 failed with error -5 [ 21.315616] i2c /dev entries driver [ 21.315622] device class 'i2c-dev': registering [ 21.315644] device: 'i2c-0': device_add [ 21.315678] PM: Adding info for No Bus:i2c-0 [ 21.315735] device: 'i2c-1': device_add [ 21.315769] PM: Adding info for No Bus:i2c-1 [ 21.315812] bus: 'i2c': add driver jc42 [ 21.315843] bus: 'platform': add driver pvt-hwmon [ 21.315885] bus: 'platform': driver_probe_device: matched device 1f200000.pvt with driver pvt-hwmon [ 21.315891] bus: 'platform': really_probe: probing driver pvt-hwmon with device 1f200000.pvt [ 21.315900] devices_kset: Moving 1f200000.pvt to end of list [ 21.315995] device: 'hwmon0': device_add [ 21.316029] PM: Adding info for No Bus:hwmon0 [ 21.316049] driver: 'pvt-hwmon': driver_bound: bound to device '1f200000.pvt' [ 21.316054] bus: 'platform': really_probe: bound device 1f200000.pvt to driver pvt-hwmon [ 21.316083] bus: 'platform': add driver dw_wdt [ 21.316106] bus: 'platform': driver_probe_device: matched device 1f04c000.watchdog with driver dw_wdt [ 21.316111] bus: 'platform': really_probe: probing driver dw_wdt with device 1f04c000.watchdog [ 21.316120] devices_kset: Moving 1f04c000.watchdog to end of list [ 21.316140] device: 'watchdog': device_add [ 21.316164] PM: Adding info for No Bus:watchdog [ 21.316213] driver: 'dw_wdt': driver_bound: bound to device '1f04c000.watchdog' [ 21.316218] bus: 'platform': really_probe: bound device 1f04c000.watchdog to driver dw_wdt [ 21.316249] bus: 'mmc': add driver mmcblk [ 21.316274] bus: 'usb': add driver ushc [ 21.316307] usbcore: registered new interface driver ushc [ 21.316340] bus: 'hid': registered [ 21.316346] bus: 'hid': add driver hid-generic [ 21.316371] bus: 'usb': add driver usbhid [ 21.316405] usbcore: registered new interface driver usbhid [ 21.316408] usbhid: USB HID core driver [ 21.316419] no options. [ 21.316426] bus: 'pci': add driver sm750fb [ 21.316476] device: 'timer': device_add [ 21.316506] PM: Adding info for No Bus:timer [ 21.316584] Registering platform device 'snd-soc-dummy'. Parent at platform [ 21.316588] device: 'snd-soc-dummy': device_add [ 21.316598] bus: 'platform': add device snd-soc-dummy [ 21.316624] PM: Adding info for platform:snd-soc-dummy [ 21.316653] bus: 'platform': add driver snd-soc-dummy [ 21.316669] bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummy [ 21.316674] bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy [ 21.316681] devices_kset: Moving snd-soc-dummy to end of list [ 21.316694] driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy' [ 21.316699] bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy [ 21.316718] bus: 'platform': add driver soc-audio [ 21.316749] bus: 'i2c': add driver tlv320aic31xx-codec [ 21.316786] bus: 'platform': add driver dw_pci [ 21.316804] bus: 'platform': driver_probe_device: matched device 1f052000.pci with driver dw_pci [ 21.316809] bus: 'platform': really_probe: probing driver dw_pci with device 1f052000.pci [ 21.316818] devices_kset: Moving 1f052000.pci to end of list [ 21.316875] dw_pci 1f052000.pci: DW PCIe driver successfully loaded. [ 21.316880] dw_pci 1f052000.pci: MSI IRQ:95 AER IRQ:96 [ 21.316884] driver: 'dw_pci': driver_bound: bound to device '1f052000.pci' [ 21.316888] bus: 'platform': really_probe: bound device 1f052000.pci to driver dw_pci [ 21.316983] Netfilter messages via NETLINK v0.30. [ 21.317024] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.317268] nf_tables: (c) 2007-2009 Patrick McHardy [ 21.317749] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.317879] arp_tables: (C) 2002 David S. Miller [ 21.317932] Initializing XFRM netlink socket [ 21.318006] NET: Registered protocol family 10 [ 21.318667] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 21.318771] sit: IPv6 over IPv4 tunneling driver [ 21.318801] device: 'sit0': device_add [ 21.318946] PM: Adding info for No Bus:sit0 [ 21.319168] NET: Registered protocol family 17 [ 21.319187] NET: Registered protocol family 15 [ 21.319238] Key type dns_resolver registered [ 21.332392] dw_pcie_init: DEV_ID_VEND_ID=0x80601d39 CLASS_CODE_REV_ID=0x1 [ 21.612580] dw_pcie_init: PCIe error code = 0x1c0 [ 21.615998] mips_pcibios_init: Init DW PCI controller failed [ 21.620365] CMP IOCU detected [ 21.620368] Hardware DMA cache coherency disabled [ 21.620408] device: 'cpu_dma_latency': device_add [ 21.620441] PM: Adding info for No Bus:cpu_dma_latency [ 21.620808] device: 'network_latency': device_add [ 21.620836] PM: Adding info for No Bus:network_latency [ 21.620898] device: 'network_throughput': device_add [ 21.620924] PM: Adding info for No Bus:network_throughput [ 21.620968] device: 'memory_bandwidth': device_add [ 21.620993] PM: Adding info for No Bus:memory_bandwidth [ 21.621201] hctosys: unable to open rtc device (rtc0) [ 21.621363] ALSA device list: [ 21.621366] No soundcards found. [ 21.621557] Freeing unused kernel memory: 304K [ 21.732407] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 21.872618] usb 1-1: New USB device found, idVendor=0424, idProduct=2422 [ 21.872628] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 21.872635] device: '1-1': device_add [ 21.872728] bus: 'usb': add device 1-1 [ 21.872755] PM: Adding info for usb:1-1 [ 21.872882] bus: 'usb': driver_probe_device: matched device 1-1 with driver usb [ 21.872887] bus: 'usb': really_probe: probing driver usb with device 1-1 [ 21.872899] devices_kset: Moving 1-1 to end of list [ 21.885686] device: '1-1:1.0': device_add [ 21.885716] bus: 'usb': add device 1-1:1.0 [ 21.885727] PM: Adding info for usb:1-1:1.0 [ 21.885757] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver hub [ 21.885761] bus: 'usb': really_probe: probing driver hub with device 1-1:1.0 [ 21.885771] devices_kset: Moving 1-1:1.0 to end of list [ 21.885781] hub 1-1:1.0: USB hub found [ 21.885867] hub 1-1:1.0: 2 ports detected [ 21.885981] device: '1-1-port1': device_add [ 21.886006] PM: Adding info for No Bus:1-1-port1 [ 21.886023] device: '1-1-port2': device_add [ 21.886045] PM: Adding info for No Bus:1-1-port2 [ 21.886221] driver: 'hub': driver_bound: bound to device '1-1:1.0' [ 21.886230] bus: 'usb': really_probe: bound device 1-1:1.0 to driver hub [ 21.886240] device: 'ep_81': device_add [ 21.886278] PM: Adding info for No Bus:ep_81 [ 21.886284] driver: 'usb': driver_bound: bound to device '1-1' [ 21.886291] bus: 'usb': really_probe: bound device 1-1 to driver usb [ 21.886305] device: 'ep_00': device_add [ 21.886338] PM: Adding info for No Bus:ep_00 [ 23.677412] udevd[1025]: starting version 239 [ 24.258144] random: nonblocking pool is initialized [ 24.831014] udevd[1293]: Process '/lib/uevent/filters/mountdev' failed with exit code 1. [ 25.858211] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended [ 27.901907] systemd[1]: System time before build time, advancing clock. [ 27.916016] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) [ 27.916231] systemd[1]: Detected architecture mips. [ 27.919493] systemd[1]: Set hostname to . [ 28.059894] ttyS0 - failed to request DMA [ 28.117120] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 28.117134] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 28.256369] systemd[1]: Listening on Journal Socket (/dev/log). [ 28.257575] systemd[1]: Created slice User and Session Slice. [ 28.258394] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 28.258709] systemd[1]: Listening on Journal Socket. [ 28.282791] systemd[1]: Mounting POSIX Message Queue File System... [ 28.283009] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 28.283305] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 28.283634] systemd[1]: Condition check resulted in Kernel Debug File System being skipped. [ 28.283747] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 28.286183] systemd[1]: Starting Remount Root and Kernel File Systems... [ 28.286580] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 28.286686] systemd[1]: Reached target Paths. [ 28.286730] systemd[1]: Reached target Local Encrypted Volumes. [ 28.290631] systemd[1]: Starting Load Kernel Modules... [ 28.290772] systemd[1]: Reached target Remote Encrypted Volumes. [ 28.291576] systemd[1]: Created slice system-getty.slice. [ 28.291785] systemd[1]: Condition check resulted in Create list of required static device nodes for the current kernel being skipped. [ 28.292159] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 28.295026] systemd[1]: Starting Create Static Device Nodes in /dev... [ 28.295137] systemd[1]: Reached target Slices. [ 28.295701] systemd[1]: Listening on udev Control Socket. [ 28.296369] systemd[1]: Listening on Journal Audit Socket. [ 28.299202] systemd[1]: Starting Journal Service... [ 28.299655] systemd[1]: Listening on udev Kernel Socket. [ 28.305304] systemd[1]: Starting udev Coldplug all Devices... [ 28.331449] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 28.331681] systemd[1]: Reached target Swap. [ 28.335126] systemd[1]: Starting Set default kernel console loglevel... [ 28.337553] systemd[1]: Mounted POSIX Message Queue File System. [ 28.411648] systemd[1]: altlinux-kmsg-loglevel.service: Succeeded. [ 28.412442] systemd[1]: Started Set default kernel console loglevel. [ 28.454623] systemd[1]: Started Load Kernel Modules. [ 28.455312] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped. [ 28.523787] systemd[1]: Starting Apply Kernel Variables... [ 28.524224] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 28.528490] systemd[1]: Started Create Static Device Nodes in /dev. [ 28.604522] systemd[1]: Started Remount Root and Kernel File Systems. [ 28.604875] systemd[1]: Condition check resulted in File System Quota Check being skipped. [ 28.604927] systemd[1]: Condition check resulted in Enable File System Quotas being skipped. [ 28.604988] systemd[1]: Reached target Remote File Systems. [ 28.605075] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 28.605125] systemd[1]: Reached target Local File Systems (Pre). [ 28.608235] systemd[1]: Mounting /tmp... [ 28.608643] systemd[1]: var-run.mount: Directory /var/run to mount over is not empty, mounting anyway. [ 28.610918] systemd[1]: Mounting Runtime Directory... [ 28.623389] systemd[1]: var-lock.mount: Directory /var/lock to mount over is not empty, mounting anyway. [ 28.627901] systemd[1]: Mounting Lock Directory... [ 28.644414] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 28.647163] systemd[1]: Starting udev Kernel Device Manager... [ 28.713542] systemd[1]: Starting Load/Save Random Seed... [ 28.713690] systemd[1]: Condition check resulted in Set the system clock (when /etc/adjtime is missing) being skipped. [ 28.713806] systemd[1]: Reached target System Time Synchronized. [ 28.717137] systemd[1]: Started Apply Kernel Variables. [ 28.717608] systemd[1]: Mounted /tmp. [ 28.717995] systemd[1]: Mounted Runtime Directory. [ 28.718381] systemd[1]: Mounted Lock Directory. [ 28.719286] systemd[1]: Reached target Local File Systems. [ 28.719439] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 28.719507] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped. [ 28.762955] systemd[1]: Condition check resulted in Rebuild Journal Catalog being skipped. [ 28.763134] systemd[1]: Condition check resulted in Update is Completed being skipped. [ 28.842059] systemd[1]: Started Journal Service. [ 29.001855] systemd-journald[1926]: Received request to flush runtime journal from PID 1 [ 29.004021] systemd-journald[1926]: File /var/log/journal/859935d72f9e78586c8aa1ae5c176c03/system.journal corrupted or uncleanly shut down, renaming and replacing.