[    1.051996] bus: 'mdio_bus': add driver Marvell 88X2222
[    1.052036] bus: 'platform': add driver be-xgbe
[    1.052072] bus: 'platform': driver_probe_device: matched device 1f054000.eth0 with driver be-xgbe
[    1.052079] bus: 'platform': really_probe: probing driver be-xgbe with device 1f054000.eth0
[    1.052091] devices_kset: Moving 1f054000.eth0 to end of list
[    1.060193] device: 'eth0': device_add
[    1.060339] PM: Adding info for No Bus:eth0
[    1.060659] device: 'ptp0': device_add
[    1.060712] PM: Adding info for No Bus:ptp0
[    1.060800] be-xgbe 1f054000.eth0 eth0: net device enabled
[    1.066310] driver: 'be-xgbe': driver_bound: bound to device '1f054000.eth0'
[    1.066316] bus: 'platform': really_probe: bound device 1f054000.eth0 to driver be-xgbe
[    1.066384] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    1.073478] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.079255] bus: 'pci': add driver e1000
[    1.079310] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.085178] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.091131] bus: 'pci': add driver e1000e
[    1.091173] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[    1.098874] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[    1.104652] bus: 'pci': add driver ixgbe
[    1.104693] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k
[    1.114143] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[    1.120269] bus: 'pci': add driver ixgbevf
[    1.120310] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[    1.127478] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[    1.133170] bus: 'pci': add driver ixgb
[    1.133218] bus: 'platform': add driver baikal-dwmac
[    1.133245] bus: 'platform': driver_probe_device: matched device 1f05e000.eth1 with driver baikal-dwmac
[    1.133252] bus: 'platform': really_probe: probing driver baikal-dwmac with device 1f05e000.eth1
[    1.133262] devices_kset: Moving 1f05e000.eth1 to end of list
[    1.133307] baikal-dwmac 1f05e000.eth1: Baikal Electronics DWMAC glue driver
[    1.140426] baikal-dwmac 1f05e000.eth1: no reset control found
[    1.146289] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    1.151371]  Ring mode enabled
[    1.154445]  DMA HW capability register supported
[    1.158987]  Enhanced/Alternate descriptors
[    1.163392] 	Enabled extended descriptors
[    1.167424]  RX Checksum Offload Engine supported (type 2)
[    1.172939]  TX Checksum insertion supported
[    1.177231]  Wake-Up On Lan supported
[    1.180942]  Enable RX Mitigation via HW Watchdog Timer
[    1.186199] device: 'stmmac-0': device_add
[    1.186234] PM: Adding info for No Bus:stmmac-0
[    1.186255] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth1@1F05E000[0]'
[    1.190809] device: 'stmmac-0:03': device_add
[    1.190836] bus: 'mdio_bus': add device stmmac-0:03
[    1.190873] PM: Adding info for mdio_bus:stmmac-0:03
[    1.190911] bus: 'mdio_bus': driver_probe_device: matched device stmmac-0:03 with driver Micrel KSZ9031 Gigabit PHY
[    1.190919] bus: 'mdio_bus': really_probe: probing driver Micrel KSZ9031 Gigabit PHY with device stmmac-0:03
[    1.190931] devices_kset: Moving stmmac-0:03 to end of list
[    1.190937] driver: 'Micrel KSZ9031 Gigabit PHY': driver_bound: bound to device 'stmmac-0:03'
[    1.190943] bus: 'mdio_bus': really_probe: bound device stmmac-0:03 to driver Micrel KSZ9031 Gigabit PHY
[    1.199910] libphy: stmmac: probed
[    1.203363] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-0:03) active
[    1.209860] device: 'eth1': device_add
[    1.210005] PM: Adding info for No Bus:eth1
[    1.210191] driver: 'baikal-dwmac': driver_bound: bound to device '1f05e000.eth1'
[    1.210199] bus: 'platform': really_probe: bound device 1f05e000.eth1 to driver baikal-dwmac
[    1.210212] bus: 'platform': driver_probe_device: matched device 1f060000.eth2 with driver baikal-dwmac
[    1.210218] bus: 'platform': really_probe: probing driver baikal-dwmac with device 1f060000.eth2
[    1.210230] devices_kset: Moving 1f060000.eth2 to end of list
[    1.210291] baikal-dwmac 1f060000.eth2: Baikal Electronics DWMAC glue driver
[    1.217407] baikal-dwmac 1f060000.eth2: no reset control found
[    1.223279] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    1.228355]  Ring mode enabled
[    1.231434]  DMA HW capability register supported
[    1.235976]  Enhanced/Alternate descriptors
[    1.240383] 	Enabled extended descriptors
[    1.244414]  RX Checksum Offload Engine supported (type 2)
[    1.249926]  TX Checksum insertion supported
[    1.254222]  Wake-Up On Lan supported
[    1.257929]  Enable RX Mitigation via HW Watchdog Timer
[    1.263191] device: 'stmmac-1': device_add
[    1.263226] PM: Adding info for No Bus:stmmac-1
[    1.263245] of_get_named_gpiod_flags: can't parse 'snps,reset-gpio' property of node '/axi/eth2@1F060000[0]'
[    1.267657] device: 'stmmac-1:03': device_add
[    1.267684] bus: 'mdio_bus': add device stmmac-1:03
[    1.267721] PM: Adding info for mdio_bus:stmmac-1:03
[    1.267756] bus: 'mdio_bus': driver_probe_device: matched device stmmac-1:03 with driver Micrel KSZ9031 Gigabit PHY
[    1.267762] bus: 'mdio_bus': really_probe: probing driver Micrel KSZ9031 Gigabit PHY with device stmmac-1:03
[    1.267773] devices_kset: Moving stmmac-1:03 to end of list
[    1.267779] driver: 'Micrel KSZ9031 Gigabit PHY': driver_bound: bound to device 'stmmac-1:03'
[    1.267785] bus: 'mdio_bus': really_probe: bound device stmmac-1:03 to driver Micrel KSZ9031 Gigabit PHY
[    1.276752] libphy: stmmac: probed
[    1.280194] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-1:03) active
[    1.286691] device: 'eth2': device_add
[    1.286829] PM: Adding info for No Bus:eth2
[    1.286986] driver: 'baikal-dwmac': driver_bound: bound to device '1f060000.eth2'
[    1.286993] bus: 'platform': really_probe: bound device 1f060000.eth2 to driver baikal-dwmac
[    1.287087] bus: 'platform': add driver stmmaceth
[    1.287181] bus: 'platform': add driver dwc3
[    1.287237] bus: 'pci': add driver dwc3-pci
[    1.287284] bus: 'platform': add driver baikal-dwc3
[    1.287298] bus: 'platform': driver_probe_device: matched device 1f04d050.usb with driver baikal-dwc3
[    1.287305] bus: 'platform': really_probe: probing driver baikal-dwc3 with device 1f04d050.usb
[    1.287316] devices_kset: Moving 1f04d050.usb to end of list
[    1.287413] device: '1f100000.dwc3': device_add
[    1.287426] bus: 'platform': add device 1f100000.dwc3
[    1.287455] PM: Adding info for platform:1f100000.dwc3
[    1.287525] bus: 'platform': driver_probe_device: matched device 1f100000.dwc3 with driver dwc3
[    1.287531] bus: 'platform': really_probe: probing driver dwc3 with device 1f100000.dwc3
[    1.287539] devices_kset: Moving 1f100000.dwc3 to end of list
[    1.290761] device: '1f100000.dwc3.ulpi': device_add
[    1.290794] bus: 'ulpi': add device 1f100000.dwc3.ulpi
[    1.290822] PM: Adding info for ulpi:1f100000.dwc3.ulpi
[    1.330132] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.336489] ata1.00: ATA-9: nanoSSD 3SE, S141002C, max UDMA/133
[    1.342457] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.349330] ata1.00: configured for UDMA/133
[    1.354017] scsi 0:0:0:0: Direct-Access     ATA      nanoSSD 3SE      002C PQ: 0 ANSI: 5
[    1.362270] device: 'target0:0:0': device_add
[    1.362289] bus: 'scsi': add device target0:0:0
[    1.362315] PM: Adding info for scsi:target0:0:0
[    1.362341] device: '0:0:0:0': device_add
[    1.362413] bus: 'scsi': add device 0:0:0:0
[    1.362433] PM: Adding info for scsi:0:0:0:0
[    1.362450] bus: 'scsi': driver_probe_device: matched device 0:0:0:0 with driver sd
[    1.362456] bus: 'scsi': really_probe: probing driver sd with device 0:0:0:0
[    1.362467] devices_kset: Moving 0:0:0:0 to end of list
[    1.362492] device: '0:0:0:0': device_add
[    1.362548] PM: Adding info for No Bus:0:0:0:0
[    1.362565] driver: 'sd': driver_bound: bound to device '0:0:0:0'
[    1.362570] bus: 'scsi': really_probe: bound device 0:0:0:0 to driver sd
[    1.362576] device: '0:0:0:0': device_add
[    1.362610] PM: Adding info for No Bus:0:0:0:0
[    1.362640] device: 'sg0': device_add
[    1.362671] PM: Adding info for No Bus:sg0
[    1.362897] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB)
[    1.370585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.375930] device: '0:0:0:0': device_add
[    1.375964] PM: Adding info for No Bus:0:0:0:0
[    1.376120] sd 0:0:0:0: [sda] Write Protect is off
[    1.380960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.381204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.390327] device: '8:0': device_add
[    1.390370] PM: Adding info for No Bus:8:0
[    1.390388] device: 'sda': device_add
[    1.390442] PM: Adding info for No Bus:sda
[    1.391164]  sda: sda1
[    1.393565] device: 'sda1': device_add
[    1.393617] PM: Adding info for No Bus:sda1
[    1.394163] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.490577] Registering platform device 'xhci-hcd.0.auto'. Parent at 1f100000.dwc3
[    1.490583] device: 'xhci-hcd.0.auto': device_add
[    1.490596] bus: 'platform': add device xhci-hcd.0.auto
[    1.490625] PM: Adding info for platform:xhci-hcd.0.auto
[    1.490673] driver: 'dwc3': driver_bound: bound to device '1f100000.dwc3'
[    1.490679] bus: 'platform': really_probe: bound device 1f100000.dwc3 to driver dwc3
[    1.490692] driver: 'baikal-dwc3': driver_bound: bound to device '1f04d050.usb'
[    1.490697] bus: 'platform': really_probe: bound device 1f04d050.usb to driver baikal-dwc3
[    1.490793] device class 'usbmon': registering
[    1.490819] device: 'usbmon0': device_add
[    1.490853] PM: Adding info for No Bus:usbmon0
[    1.490927] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.497144] ohci-pci: OHCI PCI platform driver
[    1.501630] bus: 'pci': add driver ohci-pci
[    1.501680] ohci-platform: OHCI generic platform driver
[    1.506937] bus: 'platform': add driver ohci-platform
[    1.507003] bus: 'pci': add driver xhci_hcd
[    1.507033] bus: 'platform': add driver xhci-hcd
[    1.507092] bus: 'platform': driver_probe_device: matched device xhci-hcd.0.auto with driver xhci-hcd
[    1.507098] bus: 'platform': really_probe: probing driver xhci-hcd with device xhci-hcd.0.auto
[    1.507109] devices_kset: Moving xhci-hcd.0.auto to end of list
[    1.507137] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.512672] device: 'usbmon1': device_add
[    1.512704] PM: Adding info for No Bus:usbmon1
[    1.512760] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    1.520839] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x00010010
[    1.529616] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0x1f100000
[    1.535700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.542534] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.549800] usb usb1: Product: xHCI Host Controller
[    1.554711] usb usb1: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd
[    1.561447] usb usb1: SerialNumber: xhci-hcd.0.auto
[    1.566357] device: 'usb1': device_add
[    1.566434] bus: 'usb': add device usb1
[    1.566477] PM: Adding info for usb:usb1
[    1.566580] bus: 'usb': driver_probe_device: matched device usb1 with driver usb
[    1.566587] bus: 'usb': really_probe: probing driver usb with device usb1
[    1.566598] devices_kset: Moving usb1 to end of list
[    1.566635] device: '1-0:1.0': device_add
[    1.566667] bus: 'usb': add device 1-0:1.0
[    1.566678] PM: Adding info for usb:1-0:1.0
[    1.566704] bus: 'usb': driver_probe_device: matched device 1-0:1.0 with driver hub
[    1.566710] bus: 'usb': really_probe: probing driver hub with device 1-0:1.0
[    1.566720] devices_kset: Moving 1-0:1.0 to end of list
[    1.566729] hub 1-0:1.0: USB hub found
[    1.570536] hub 1-0:1.0: 1 port detected
[    1.574512] device: 'usb1-port1': device_add
[    1.574539] PM: Adding info for No Bus:usb1-port1
[    1.574583] driver: 'hub': driver_bound: bound to device '1-0:1.0'
[    1.574589] bus: 'usb': really_probe: bound device 1-0:1.0 to driver hub
[    1.574600] device: 'ep_81': device_add
[    1.574638] PM: Adding info for No Bus:ep_81
[    1.574644] driver: 'usb': driver_bound: bound to device 'usb1'
[    1.574649] bus: 'usb': really_probe: bound device usb1 to driver usb
[    1.574658] device: 'ep_00': device_add
[    1.574692] PM: Adding info for No Bus:ep_00
[    1.574706] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.580239] device: 'usbmon2': device_add
[    1.580268] PM: Adding info for No Bus:usbmon2
[    1.580320] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    1.588077] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.596301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.603132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.610405] usb usb2: Product: xHCI Host Controller
[    1.615308] usb usb2: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd
[    1.622045] usb usb2: SerialNumber: xhci-hcd.0.auto
[    1.626953] device: 'usb2': device_add
[    1.627021] bus: 'usb': add device usb2
[    1.627064] PM: Adding info for usb:usb2
[    1.627150] bus: 'usb': driver_probe_device: matched device usb2 with driver usb
[    1.627156] bus: 'usb': really_probe: probing driver usb with device usb2
[    1.627165] devices_kset: Moving usb2 to end of list
[    1.627204] device: '2-0:1.0': device_add
[    1.627233] bus: 'usb': add device 2-0:1.0
[    1.627244] PM: Adding info for usb:2-0:1.0
[    1.627267] bus: 'usb': driver_probe_device: matched device 2-0:1.0 with driver hub
[    1.627272] bus: 'usb': really_probe: probing driver hub with device 2-0:1.0
[    1.627281] devices_kset: Moving 2-0:1.0 to end of list
[    1.627288] hub 2-0:1.0: USB hub found
[    1.631092] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.638270] hub: probe of 2-0:1.0 rejects match -19
[    1.638280] device: 'ep_81': device_add
[    1.638317] PM: Adding info for No Bus:ep_81
[    1.638323] driver: 'usb': driver_bound: bound to device 'usb2'
[    1.638329] bus: 'usb': really_probe: bound device usb2 to driver usb
[    1.638336] device: 'ep_00': device_add
[    1.638372] PM: Adding info for No Bus:ep_00
[    1.638388] driver: 'xhci-hcd': driver_bound: bound to device 'xhci-hcd.0.auto'
[    1.638393] bus: 'platform': really_probe: bound device xhci-hcd.0.auto to driver xhci-hcd
[    1.638423] bus: 'usb': add driver uas
[    1.638457] usbcore: registered new interface driver uas
[    1.643813] bus: 'usb': add driver usb-storage
[    1.643865] usbcore: registered new interface driver usb-storage
[    1.649910] Registering platform device 'i8042'. Parent at platform
[    1.649914] device: 'i8042': device_add
[    1.649924] bus: 'platform': add device i8042
[    1.649950] PM: Adding info for platform:i8042
[    1.649983] bus: 'platform': add driver i8042
[    1.650005] bus: 'platform': driver_probe_device: matched device i8042 with driver i8042
[    1.650010] bus: 'platform': really_probe: probing driver i8042 with device i8042
[    1.650019] devices_kset: Moving i8042 to end of list
[    1.740126] ata2: SATA link down (SStatus 0 SControl 300)
[    2.150191] i8042: i8042 controller selftest timeout
[    2.155188] i8042: probe of i8042 rejects match -19
[    2.155208] bus: 'platform': remove driver i8042
[    2.155222] driver: 'i8042': driver_release
[    2.155250] bus: 'platform': remove device i8042
[    2.155255] PM: Removing info for platform:i8042
[    2.155291] device: 'mice': device_add
[    2.155323] PM: Adding info for No Bus:mice
[    2.155554] device: 'psaux': device_add
[    2.155587] PM: Adding info for No Bus:psaux
[    2.155640] mousedev: PS/2 mouse device common for all mice
[    2.161263] bus: 'i2c': add driver rtc-ab-eoz9-s3
[    2.161289] bus: 'i2c': driver_probe_device: matched device 1-0056 with driver rtc-ab-eoz9-s3
[    2.161296] bus: 'i2c': really_probe: probing driver rtc-ab-eoz9-s3 with device 1-0056
[    2.161306] devices_kset: Moving 1-0056 to end of list
[    2.161410] rtc-ab-eoz9-s3 1-0056: abeoz9s3_i2c_validate_client: could not read register 0
[    2.169726] rtc-ab-eoz9-s3: probe of 1-0056 failed with error -5
[    2.175798] i2c /dev entries driver
[    2.179312] device class 'i2c-dev': registering
[    2.179334] device: 'i2c-0': device_add
[    2.179370] PM: Adding info for No Bus:i2c-0
[    2.179424] device: 'i2c-1': device_add
[    2.179459] PM: Adding info for No Bus:i2c-1
[    2.179510] bus: 'i2c': add driver jc42
[    2.179541] bus: 'platform': add driver pvt-hwmon
[    2.179586] bus: 'platform': driver_probe_device: matched device 1f200000.pvt with driver pvt-hwmon
[    2.179592] bus: 'platform': really_probe: probing driver pvt-hwmon with device 1f200000.pvt
[    2.179602] devices_kset: Moving 1f200000.pvt to end of list
[    2.179695] device: 'hwmon0': device_add
[    2.179731] PM: Adding info for No Bus:hwmon0
[    2.179753] driver: 'pvt-hwmon': driver_bound: bound to device '1f200000.pvt'
[    2.179759] bus: 'platform': really_probe: bound device 1f200000.pvt to driver pvt-hwmon
[    2.179789] bus: 'platform': add driver dw_wdt
[    2.179814] bus: 'platform': driver_probe_device: matched device 1f04c000.watchdog with driver dw_wdt
[    2.179821] bus: 'platform': really_probe: probing driver dw_wdt with device 1f04c000.watchdog
[    2.179831] devices_kset: Moving 1f04c000.watchdog to end of list
[    2.179851] device: 'watchdog': device_add
[    2.179877] PM: Adding info for No Bus:watchdog
[    2.179933] driver: 'dw_wdt': driver_bound: bound to device '1f04c000.watchdog'
[    2.179939] bus: 'platform': really_probe: bound device 1f04c000.watchdog to driver dw_wdt
[    2.179970] bus: 'mmc': add driver mmcblk
[    2.179997] bus: 'usb': add driver ushc
[    2.180030] usbcore: registered new interface driver ushc
[    2.185502] bus: 'hid': registered
[    2.185510] bus: 'hid': add driver hid-generic
[    2.185536] bus: 'usb': add driver usbhid
[    2.185576] usbcore: registered new interface driver usbhid
[    2.191183] usbhid: USB HID core driver
[    2.195054] bus: 'pci': add driver sm750fb
[    2.195104] device: 'timer': device_add
[    2.195135] PM: Adding info for No Bus:timer
[    2.195216] Registering platform device 'snd-soc-dummy'. Parent at platform
[    2.195221] device: 'snd-soc-dummy': device_add
[    2.195232] bus: 'platform': add device snd-soc-dummy
[    2.195260] PM: Adding info for platform:snd-soc-dummy
[    2.195290] bus: 'platform': add driver snd-soc-dummy
[    2.195307] bus: 'platform': driver_probe_device: matched device snd-soc-dummy with driver snd-soc-dummy
[    2.195313] bus: 'platform': really_probe: probing driver snd-soc-dummy with device snd-soc-dummy
[    2.195322] devices_kset: Moving snd-soc-dummy to end of list
[    2.195338] driver: 'snd-soc-dummy': driver_bound: bound to device 'snd-soc-dummy'
[    2.195343] bus: 'platform': really_probe: bound device snd-soc-dummy to driver snd-soc-dummy
[    2.195362] bus: 'platform': add driver soc-audio
[    2.195393] bus: 'i2c': add driver tlv320aic31xx-codec
[    2.195431] bus: 'platform': add driver dw_pci
[    2.195450] bus: 'platform': driver_probe_device: matched device 1f052000.pci with driver dw_pci
[    2.195456] bus: 'platform': really_probe: probing driver dw_pci with device 1f052000.pci
[    2.195466] devices_kset: Moving 1f052000.pci to end of list
[    2.195525] dw_pci 1f052000.pci: DW PCIe driver successfully loaded.
[    2.201925] dw_pci 1f052000.pci: MSI IRQ:95   AER IRQ:96
[    2.207255] driver: 'dw_pci': driver_bound: bound to device '1f052000.pci'
[    2.207260] bus: 'platform': really_probe: bound device 1f052000.pci to driver dw_pci
[    2.207355] Netfilter messages via NETLINK v0.30.
[    2.212133] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    2.218496] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[    2.225542] ip_tables: (C) 2000-2006 Netfilter Core Team
[    2.231018] arp_tables: (C) 2002 David S. Miller
[    2.235709] Initializing XFRM netlink socket
[    2.240076] NET: Registered protocol family 10
[    2.245173] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    2.250724] sit: IPv6 over IPv4 tunneling driver
[    2.255391] device: 'sit0': device_add
[    2.255539] PM: Adding info for No Bus:sit0
[    2.255767] NET: Registered protocol family 17
[    2.260266] NET: Registered protocol family 15
[    2.264784] Key type dns_resolver registered
[    2.280119] dw_pcie_init: DEV_ID_VEND_ID=0x80601d39 CLASS_CODE_REV_ID=0x1
[    2.567129] dw_pcie_init: PCIe error code = 0x1c0
[    2.571863] mips_pcibios_init: Init DW PCI controller failed
[    2.577549] CMP IOCU detected
[    2.580539] Hardware DMA cache coherency disabled
[    2.585298] device: 'cpu_dma_latency': device_add
[    2.585332] PM: Adding info for No Bus:cpu_dma_latency
[    2.585414] device: 'network_latency': device_add
[    2.585449] PM: Adding info for No Bus:network_latency
[    2.585542] device: 'network_throughput': device_add
[    2.585572] PM: Adding info for No Bus:network_throughput
[    2.585641] device: 'memory_bandwidth': device_add
[    2.585670] PM: Adding info for No Bus:memory_bandwidth
[    2.585920] hctosys: unable to open rtc device (rtc0)
[    2.591181] ALSA device list:
[    2.594170]   No soundcards found.
[    2.597798] Freeing unused kernel memory: 304K
[    2.640234] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    2.780408] usb 1-1: New USB device found, idVendor=0424, idProduct=2422
[    2.780421] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.780429] device: '1-1': device_add
[    2.780520] bus: 'usb': add device 1-1
[    2.780549] PM: Adding info for usb:1-1
[    2.780696] bus: 'usb': driver_probe_device: matched device 1-1 with driver usb
[    2.780705] bus: 'usb': really_probe: probing driver usb with device 1-1
[    2.780720] devices_kset: Moving 1-1 to end of list
[    2.804245] device: '1-1:1.0': device_add
[    2.804289] bus: 'usb': add device 1-1:1.0
[    2.804306] PM: Adding info for usb:1-1:1.0
[    2.804353] bus: 'usb': driver_probe_device: matched device 1-1:1.0 with driver hub
[    2.804362] bus: 'usb': really_probe: probing driver hub with device 1-1:1.0
[    2.804375] devices_kset: Moving 1-1:1.0 to end of list
[    2.804392] hub 1-1:1.0: USB hub found
[    2.804460] hub 1-1:1.0: 2 ports detected
[    2.804568] device: '1-1-port1': device_add
[    2.804597] PM: Adding info for No Bus:1-1-port1
[    2.804616] device: '1-1-port2': device_add
[    2.804641] PM: Adding info for No Bus:1-1-port2
[    2.804817] driver: 'hub': driver_bound: bound to device '1-1:1.0'
[    2.804828] bus: 'usb': really_probe: bound device 1-1:1.0 to driver hub
[    2.804839] device: 'ep_81': device_add
[    2.804879] PM: Adding info for No Bus:ep_81
[    2.804888] driver: 'usb': driver_bound: bound to device '1-1'
[    2.804895] bus: 'usb': really_probe: bound device 1-1 to driver usb
[    2.804912] device: 'ep_00': device_add
[    2.804946] PM: Adding info for No Bus:ep_00
[    4.718568] udevd[1025]: starting version 239
[    5.339437] random: nonblocking pool is initialized
[    5.866384] udevd[1539]: Process '/lib/uevent/filters/mountdev' failed with exit code 1.
[    6.885989] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
[    8.951077] systemd[1]: System time before build time, advancing clock.
[    8.965340] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    8.965559] systemd[1]: Detected architecture mips.
[    8.969947] systemd[1]: Set hostname to <Baikal-T1>.
[    9.094937] ttyS0 - failed to request DMA
[    9.145079] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    9.145098] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    9.283192] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    9.283527] systemd[1]: Reached target Paths.
[    9.283831] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    9.284529] systemd[1]: Listening on Journal Socket.
[    9.284742] systemd[1]: Condition check resulted in Create list of required static device nodes for the current kernel being skipped.
[    9.285010] systemd[1]: Condition check resulted in Kernel Debug File System being skipped.
[    9.285242] systemd[1]: Listening on Journal Socket (/dev/log).
[    9.310877] systemd[1]: Starting Set default kernel console loglevel...
[    9.311666] systemd[1]: Listening on udev Control Socket.
[    9.314576] systemd[1]: Mounting POSIX Message Queue File System...
[    9.315351] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[    9.316136] systemd[1]: Listening on Journal Audit Socket.
[    9.319269] systemd[1]: Starting Journal Service...
[    9.320392] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    9.321156] systemd[1]: Listening on udev Kernel Socket.
[    9.321431] systemd[1]: Reached target Local Encrypted Volumes.
[    9.322163] systemd[1]: Created slice User and Session Slice.
[    9.322379] systemd[1]: Reached target Slices.
[    9.323215] systemd[1]: Created slice system-getty.slice.
[    9.326232] systemd[1]: Starting udev Coldplug all Devices...
[    9.326687] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    9.327745] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    9.327906] systemd[1]: Reached target Remote Encrypted Volumes.
[    9.328180] systemd[1]: Reached target Swap.
[    9.331134] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.331468] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    9.334110] systemd[1]: Starting Remount Root and Kernel File Systems...
[    9.357274] systemd[1]: Starting Load Kernel Modules...
[    9.360431] systemd[1]: altlinux-kmsg-loglevel.service: Succeeded.
[    9.361388] systemd[1]: Started Set default kernel console loglevel.
[    9.426041] systemd[1]: Mounted POSIX Message Queue File System.
[    9.525916] systemd[1]: Started Load Kernel Modules.
[    9.581009] systemd[1]: Starting Apply Kernel Variables...
[    9.581611] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    9.581891] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[    9.586426] systemd[1]: Started Create Static Device Nodes in /dev.
[    9.588021] systemd[1]: Started Remount Root and Kernel File Systems.
[    9.591302] systemd[1]: Starting Load/Save Random Seed...
[    9.611540] systemd[1]: Condition check resulted in Set the system clock (when /etc/adjtime is missing) being skipped.
[    9.611656] systemd[1]: Reached target System Time Synchronized.
[    9.611976] systemd[1]: Condition check resulted in File System Quota Check being skipped.
[    9.612028] systemd[1]: Condition check resulted in Enable File System Quotas being skipped.
[    9.612121] systemd[1]: Reached target Remote File Systems.
[    9.612383] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    9.613923] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    9.614067] systemd[1]: Reached target Local File Systems (Pre).
[    9.620274] systemd[1]: var-lock.mount: Directory /var/lock to mount over is not empty, mounting anyway.
[    9.622455] systemd[1]: Mounting Lock Directory...
[    9.659250] systemd[1]: Mounting /tmp...
[    9.659823] systemd[1]: var-run.mount: Directory /var/run to mount over is not empty, mounting anyway.
[    9.671973] systemd[1]: Mounting Runtime Directory...
[    9.712122] systemd[1]: Starting udev Kernel Device Manager...
[    9.715018] systemd[1]: Mounted Lock Directory.
[    9.766679] systemd[1]: Started Apply Kernel Variables.
[    9.767545] systemd[1]: Mounted /tmp.
[    9.768066] systemd[1]: Mounted Runtime Directory.
[    9.769827] systemd[1]: Reached target Local File Systems.
[    9.774965] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
[    9.775045] systemd[1]: Condition check resulted in Rebuild Dynamic Linker Cache being skipped.
[    9.780281] systemd[1]: Condition check resulted in Rebuild Journal Catalog being skipped.
[    9.780411] systemd[1]: Condition check resulted in Update is Completed being skipped.
[    9.781606] systemd[1]: Started Load/Save Random Seed.
[    9.851224] systemd[1]: Started Journal Service.
[   10.169954] systemd-journald[1925]: Received request to flush runtime journal from PID 1
[   10.172286] systemd-journald[1925]: File /var/log/journal/859935d72f9e78586c8aa1ae5c176c03/system.journal corrupted or uncleanly shut down, renaming and replacing.