Starting kernel ... Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Initializing cgroup subsys cpuacct Linux version 4.4.100-bfk3-def-alt6 (builder@localhost.localdomain) (gcc version 6.3.1 20170118 (ALT 6.3.1-alt3.0.0.mips) (GCC) ) #1 SMP Mon Nov 19 20:08:22 UTC 2018 Enable data prefetch Enable instruction prefetch bootconsole [early0] enabled CPU0 revision is: 0001a830 (MIPS P5600) FPU revision is: 30f30320 MSA revision is: 00000320 Machine device tree at: 0x87df5000 Determined physical RAM map: memory: 08000000 @ 00000000 (usable) memory: c0000000 @ 20000000 (usable) Initial ramdisk at: 0x86000000 (4315391 bytes) MIPS: machine is Baikal-T1 BFK2 evaluation board Zone ranges: DMA [mem 0x0000000000000000-0x0000000001ffffff] Normal [mem 0x0000000002000000-0x000000001fffffff] HighMem [mem 0x0000000020000000-0x00000000dfffffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000000000000-0x0000000007ffffff] node 0: [mem 0x0000000020000000-0x00000000dfffffff] Initmem setup node 0 [mem 0x0000000000000000-0x00000000dfffffff] Reserving 0MB of memory at 0MB for crashkernel VPE topology {1,1} total 2 Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 64kB, 4-way, PIPT, no aliases, linesize 32 bytes MIPS secondary cache 1024kB, 8-way, linesize 32 bytes. PERCPU: Embedded 3 pages/cpu @82804000 s14160 r8192 d26800 u49152 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 204727 Kernel command line: video=sm750fb:800x600-32@60 printk.time=1 root=/dev/sda1 rw rootwait console=ttyS0,115200n8 console=tty0 earlyprintk=uart8250,mmio32,0x1F04A000,115200 maxcpus=2 nohtw board_name=Fastwel CPC313 board_serial=0 board_rev=0.0 [ 0.000000] PID hash table entries: 512 (order: -3, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 2, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 1, 32768 bytes) [ 0.000000] Writing ErrCtl register=80000ff0 [ 0.000000] Readback ErrCtl register=80000ff0 [ 0.000000] Cache parity protection enabled [ 0.000000] L2 cache parity protection enabled [ 0.000000] MAAR configuration: [ 0.000000] [0]: 0x00000000-0x07ffffff speculate maarvh = 0x0 [ 0.000000] [1]: 0x20000000-0xdfffffff speculate maarvh = 0x0 [ 0.000000] [2]: disabled [ 0.000000] Memory: 3253264K/3276800K available (7413K kernel code, 324K rwdata, 1484K rodata, 304K init, 282K bss, 23536K reserved, 0K cma-reserved, 3145728K highmem) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:255 [ 0.000000] Offload RCU callbacks from all CPUs [ 0.000000] Offload RCU callbacks from CPUs: 0-1. [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x114c1bbbeec, max_idle_ns: 440795229572 ns [ 0.000000] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns [ 0.000004] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns [ 0.008654] CPU timer frequency: 1200 MHz [ 0.013355] Console: colour dummy device 80x25 [ 0.018169] console [tty0] enabled [ 0.021912] bootconsole [early0] disabled [ 0.132724] cdmm0 discovery (3 blocks) [ 0.132754] cdmm0-0: @0 (0x0..0xbf), type 0xfd, rev 0 [ 0.132993] cdmm1 discovery (3 blocks) [ 0.133018] cdmm1-0: @0 (0x0..0xbf), type 0xfd, rev 0 [ 0.133837] dw_dmac 1f041000.dma: DesignWare DMA Controller, 8 channels [ 0.134527] baikal-edma 1f053000.edma: Baikal PCI DMA Controller: 4 write channels, 4 read channels [ 0.134771] vgaarb: loaded [ 0.134973] SCSI subsystem initialized [ 0.135305] usbcore: registered new interface driver usbfs [ 0.135357] usbcore: registered new interface driver hub [ 0.135411] usbcore: registered new device driver usb [ 0.136269] pps_core: LinuxPPS API ver. 1 registered [ 0.136290] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.136336] PTP clock support registered [ 0.136509] Advanced Linux Sound Architecture Driver Initialized. [ 0.149988] DMA-API: preallocated 65536 debug entries [ 0.150021] DMA-API: debugging enabled by kernel config [ 0.150163] clocksource: Switched to clocksource GIC [ 0.157358] NET: Registered protocol family 2 [ 0.157786] TCP established hash table entries: 4096 (order: 0, 16384 bytes) [ 0.157831] TCP bind hash table entries: 4096 (order: 1, 32768 bytes) [ 0.157873] TCP: Hash tables configured (established 4096 bind 4096) [ 0.157928] UDP hash table entries: 512 (order: 0, 16384 bytes) [ 0.157965] UDP-Lite hash table entries: 512 (order: 0, 16384 bytes) [ 0.158096] NET: Registered protocol family 1 [ 0.158565] RPC: Registered named UNIX socket transport module. [ 0.158587] RPC: Registered udp transport module. [ 0.158605] RPC: Registered tcp transport module. [ 0.158622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.158796] Trying to unpack rootfs image as initramfs... [ 0.340348] Freeing initrd memory: 4208K [ 0.340819] be-apb 1f059000.apb_ehb: Baikal Peripheral Bus Error handler [ 0.340840] be-apb 1f059000.apb_ehb: Version 1.02 [ 0.341005] be-axi 1f04d110.axi_ehb: Baikal Interconnect Error handler [ 0.341025] be-axi 1f04d110.axi_ehb: Version 1.02 [ 0.341220] be-emc 1f042000.emc: Baikal Extended Memory controller [ 0.341242] be-emc 1f042000.emc: Version 1.01 [ 0.341264] be-emc 1f042000.emc: DDR3 ranks:1 ecc:off burst:16 bus:DQ/1 timing:1T bchop:0 bmode:0 [ 0.341430] be-wdt gic_wdt: Baikal Electronics GIC Watchdog Driver [ 0.341450] be-wdt gic_wdt: Version 1.01 [ 0.341468] be-wdt gic_wdt: Mode: Programm Interval Timer [ 0.341586] baikal_efuse 1f201000.efuse: Baikal Efuse Driver [ 0.341606] baikal_efuse 1f201000.efuse: Version 1.00 [ 0.342519] audit: initializing netlink subsys (disabled) [ 0.342577] audit: type=2000 audit(0.329:1): initialized [ 0.343360] NFS: Registering the id_resolver key type [ 0.343406] Key type id_resolver registered [ 0.343424] Key type id_legacy registered [ 0.343449] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.344283] bounce: pool size: 64 pages [ 0.344341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 0.344377] io scheduler noop registered [ 0.344397] io scheduler deadline registered [ 0.344437] io scheduler cfq registered (default) [ 0.345316] usbcore: registered new interface driver udlfb [ 0.348016] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 0.348771] console [ttyS0] disabled [ 0.348816] 1f04a000.serial0: ttyS0 at MMIO 0x1f04a000 (irq = 55, base_baud = 459558) is a 16550A [ 0.664501] console [ttyS0] enabled [ 0.668374] 1f04b000.serial1: ttyS1 at MMIO 0x1f04b000 (irq = 56, base_baud = 459558) is a 16550A [ 0.677519] [drm] Initialized drm 1.1.0 20060810 [ 0.683790] brd: module loaded [ 0.688495] loop: module loaded [ 0.693731] nbd: registered device at major 43 [ 0.701929] at24 0-0050: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 0.708622] at24 1-0054: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 0.715322] at24 1-0055: 256 byte 24c02 EEPROM, writable, 8 bytes/write [ 0.722365] ahci 1f050000.sata: SSS flag set, parallel bus scan disabled [ 0.729124] ahci 1f050000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 0.737713] ahci 1f050000.sata: flags: ncq sntf stag pm led clo only pmp fbs pio slum part ccc apst [ 0.746914] ahci 1f050000.sata: port 0 is not capable of FBS [ 0.754124] ahci 1f050000.sata: port 1 is not capable of FBS [ 0.762002] scsi host0: ahci [ 0.765171] scsi host1: ahci [ 0.768225] ata1: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x100 irq 71 [ 0.776195] ata2: SATA max UDMA/133 mmio [mem 0x1f050000-0x1f051fff] port 0x180 irq 71 [ 0.785224] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 0, 0 [ 0.791460] m25p80: probe of spi0.0 failed with error -2 [ 0.797000] m25p80 spi0.1: unrecognized JEDEC id bytes: 06, 0, 0 [ 0.803229] m25p80: probe of spi0.1 failed with error -2 [ 0.809455] libphy: Baikal GPIO MDIO bus: probed [ 1.035959] be-mdio be-mdio: MDIO ptr=87666800 [ 1.040458] be-mdio be-mdio: Baikal Electronics mezzanine card MDIO bus driver [ 1.047725] be-mdio be-mdio: Version: 1.04a [ 1.060800] be-xgbe 1f054000.eth0 eth0: net device enabled [ 1.066384] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.073478] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.079310] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 1.085178] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.091173] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k [ 1.098874] ixgbe: Copyright (c) 1999-2015 Intel Corporation. [ 1.104693] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver - version 2.12.1-k [ 1.114143] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation. [ 1.120310] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 1.127478] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 1.133307] baikal-dwmac 1f05e000.eth1: Baikal Electronics DWMAC glue driver [ 1.140426] baikal-dwmac 1f05e000.eth1: no reset control found [ 1.146289] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 1.151371] Ring mode enabled [ 1.154445] DMA HW capability register supported [ 1.158987] Enhanced/Alternate descriptors [ 1.163392] Enabled extended descriptors [ 1.167424] RX Checksum Offload Engine supported (type 2) [ 1.172939] TX Checksum insertion supported [ 1.177231] Wake-Up On Lan supported [ 1.180942] Enable RX Mitigation via HW Watchdog Timer [ 1.199910] libphy: stmmac: probed [ 1.203363] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-0:03) active [ 1.210291] baikal-dwmac 1f060000.eth2: Baikal Electronics DWMAC glue driver [ 1.217407] baikal-dwmac 1f060000.eth2: no reset control found [ 1.223279] stmmac - user ID: 0x10, Synopsys ID: 0x37 [ 1.228355] Ring mode enabled [ 1.231434] DMA HW capability register supported [ 1.235976] Enhanced/Alternate descriptors [ 1.240383] Enabled extended descriptors [ 1.244414] RX Checksum Offload Engine supported (type 2) [ 1.249926] TX Checksum insertion supported [ 1.254222] Wake-Up On Lan supported [ 1.257929] Enable RX Mitigation via HW Watchdog Timer [ 1.276752] libphy: stmmac: probed [ 1.280194] eth%d: PHY ID 00221622 at 3 IRQ POLL (stmmac-1:03) active [ 1.330132] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.336489] ata1.00: ATA-9: nanoSSD 3SE, S141002C, max UDMA/133 [ 1.342457] ata1.00: 15649200 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.349330] ata1.00: configured for UDMA/133 [ 1.354017] scsi 0:0:0:0: Direct-Access ATA nanoSSD 3SE 002C PQ: 0 ANSI: 5 [ 1.362897] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.370585] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.376120] sd 0:0:0:0: [sda] Write Protect is off [ 1.381204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.391164] sda: sda1 [ 1.394163] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.490927] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.497144] ohci-pci: OHCI PCI platform driver [ 1.501680] ohci-platform: OHCI generic platform driver [ 1.507137] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.512760] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.520839] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f664 hci version 0x100 quirks 0x00010010 [ 1.529616] xhci-hcd xhci-hcd.0.auto: irq 75, io mem 0x1f100000 [ 1.535700] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.542534] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.549800] usb usb1: Product: xHCI Host Controller [ 1.554711] usb usb1: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd [ 1.561447] usb usb1: SerialNumber: xhci-hcd.0.auto [ 1.566729] hub 1-0:1.0: USB hub found [ 1.570536] hub 1-0:1.0: 1 port detected [ 1.574706] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.580320] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.588077] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.596301] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.603132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.610405] usb usb2: Product: xHCI Host Controller [ 1.615308] usb usb2: Manufacturer: Linux 4.4.100-bfk3-def-alt6 xhci-hcd [ 1.622045] usb usb2: SerialNumber: xhci-hcd.0.auto [ 1.627288] hub 2-0:1.0: USB hub found [ 1.631092] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 1.638457] usbcore: registered new interface driver uas [ 1.643865] usbcore: registered new interface driver usb-storage [ 1.740126] ata2: SATA link down (SStatus 0 SControl 300) [ 2.150191] i8042: i8042 controller selftest timeout [ 2.155640] mousedev: PS/2 mouse device common for all mice [ 2.161410] rtc-ab-eoz9-s3 1-0056: abeoz9s3_i2c_validate_client: could not read register 0 [ 2.169726] rtc-ab-eoz9-s3: probe of 1-0056 failed with error -5 [ 2.175798] i2c /dev entries driver [ 2.180030] usbcore: registered new interface driver ushc [ 2.185576] usbcore: registered new interface driver usbhid [ 2.191183] usbhid: USB HID core driver [ 2.195525] dw_pci 1f052000.pci: DW PCIe driver successfully loaded. [ 2.201925] dw_pci 1f052000.pci: MSI IRQ:95 AER IRQ:96 [ 2.207355] Netfilter messages via NETLINK v0.30. [ 2.212133] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 2.218496] nf_tables: (c) 2007-2009 Patrick McHardy [ 2.225542] ip_tables: (C) 2000-2006 Netfilter Core Team [ 2.231018] arp_tables: (C) 2002 David S. Miller [ 2.235709] Initializing XFRM netlink socket [ 2.240076] NET: Registered protocol family 10 [ 2.245173] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.250724] sit: IPv6 over IPv4 tunneling driver [ 2.255767] NET: Registered protocol family 17 [ 2.260266] NET: Registered protocol family 15 [ 2.264784] Key type dns_resolver registered [ 2.280119] dw_pcie_init: DEV_ID_VEND_ID=0x80601d39 CLASS_CODE_REV_ID=0x1 [ 2.567129] dw_pcie_init: PCIe error code = 0x1c0 [ 2.571863] mips_pcibios_init: Init DW PCI controller failed [ 2.577549] CMP IOCU detected [ 2.580539] Hardware DMA cache coherency disabled [ 2.585920] hctosys: unable to open rtc device (rtc0) [ 2.591181] ALSA device list: [ 2.594170] No soundcards found. [ 2.597798] Freeing unused kernel memory: 304K Baikal-T1 login: