Linux version 2.6.11-std26-up-alt6 (builder@mash.office.altlinux.ru) (gcc version 3.4.3 20050314 (ALT Linux, build 3.4.3-alt6)) #1 Wed Mar 30 00:32:02 MSD 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fe40000 (usable) BIOS-e820: 000000000fe40000 - 000000000fe50000 (ACPI data) BIOS-e820: 000000000fe50000 - 000000000ff00000 (ACPI NVS) 0MB HIGHMEM available. 254MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 65088 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 60992 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ACPIAM ) @ 0x000f71b0 ACPI: RSDT (v001 INTEL D845GRG2 0x11000215 MSFT 0x00000097) @ 0x0fe40000 ACPI: FADT (v002 INTEL D845GRG2 0x11000215 MSFT 0x00000097) @ 0x0fe40200 ACPI: MADT (v001 INTEL D845GRG2 0x11000215 MSFT 0x00000097) @ 0x0fe40300 ACPI: ASF! (v016 AMIASF I845GASF 0x00000001 MSFT 0x0100000d) @ 0x0fe442f0 ACPI: DSDT (v001 INTEL D845GRG2 0x0000010a MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:1 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 0ff00000 (gap: 0ff00000:f0100000) Built 1 zonelists Kernel command line: BOOT_IMAGE=alt0/vmlinuz initrd=alt0/full.cz changedisk automatic=method:cdrom splashcount=15 x11i=vesa lang=ru splash=silent bootsplash: silent mode. mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 1822.157 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 252396k/260352k available (1653k kernel code, 7408k reserved, 749k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3563.52 BogoMIPS (lpj=1781760) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 128K CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled CPU: Intel(R) Celeron(R) CPU 1.80GHz stepping 03 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: Looking for DSDT in initrd... not found! tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................................................................................... Table [DSDT](id F004) - 591 Objects with 46 Devices 164 Methods 21 Regions ACPI Namespace successfully loaded at root c03aabe0 evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 2342k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:............................................................................................................... Initialized 20/21 Regions 29/29 Fields 48/48 Buffers 14/14 Packages (600 nodes) Executing all Device _STA and_INI methods:.................................................. 50 Devices found containing: 50 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init exoparg2-0436 [13] ex_opcode_2A_1T_1R : Index value (14) beyond end of buffer (12) psparse-1138: *** Error: Method execution failed [\MCTH] (Node cfe1d9e8), AE_AML_BUFFER_LIMIT psparse-1138: *** Error: Method execution failed [\OSFL] (Node cfe1da28), AE_AML_BUFFER_LIMIT psparse-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c1237e28), AE_AML_BUFFER_LIMIT uteval-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c1237e28), AE_AML_BUFFER_LIMIT pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01 pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas@hp.com ** so I can fix the driver. exoparg2-0436 [14] ex_opcode_2A_1T_1R : Index value (14) beyond end of buffer (12) psparse-1138: *** Error: Method execution failed [\MCTH] (Node cfe1d9e8), AE_AML_BUFFER_LIMIT psparse-1138: *** Error: Method execution failed [\OSFL] (Node cfe1da28), AE_AML_BUFFER_LIMIT psparse-1138: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c1237e28), AE_AML_BUFFER_LIMIT uteval-0158: *** Error: Method execution failed [\_SB_.SYSM._CRS] (Node c1237e28), AE_AML_BUFFER_LIMIT pnp: 00:0b: ioport range 0x400-0x47f could not be reserved pnp: 00:0b: ioport range 0x680-0x6ff has been reserved pnp: 00:0b: ioport range 0x480-0x4bf has been reserved audit: initializing netlink socket (disabled) audit(1115138706.053:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 ACPI wakeup devices: P0P1 UAR1 USB0 USB1 USB2 USB3 AC97 SLPB ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 176k freed Executing init=/init Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: ST340014A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xffa7fc00 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0xe800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0xe880 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0xec00 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 2-2: new full speed USB device using uhci_hcd and address 2 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A loop: loaded (max 8 devices) Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher Registering unionfs version $Id: main.c,v 1.85 2005/03/14 22:19:49 dquigley Exp $ drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI SIO drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI 8U232AM Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT232BM Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI FT2232C Compatible drivers/usb/serial/usb-serial.c: USB Serial support registered for USB-UIRT Infrared Tranceiver drivers/usb/serial/usb-serial.c: USB Serial support registered for Home-Electronics TIRA-1 IR Transceiver ftdi_sio 2-2:1.0: FTDI FT232BM Compatible converter detected usb 2-2: FTDI FT232BM Compatible converter now attached to ttyUSB0 usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.1:USB FTDI Serial Converters Driver Linux agpgart interface v0.100 (c) Dave Jones intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets intelfb: Version 0.9.2 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 intelfb: 00:02.0: Intel(R) 845G, aperture size 128MB, stolen memory 380kB intelfb: cannot acquire agp hw_random hardware driver 1.0.0 loaded eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 20 eth0: 0000:01:08.0, 00:07:E9:D4:9D:0E, IRQ 20. Board assembly 000000-000, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). hda: max request size: 1024KiB hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 input: GenPS/2 Genius Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077