Linux version 2.6.11-std26-up-alt8 (builder@mash.office.altlinux.ru) (gcc version 3.4.3 20050314 (ALT Linux, build 3.4.3-alt6)) #1 Thu May 12 03:47:01 MSD 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000a000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 160MB LOWMEM available. On node 0 totalpages: 40960 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 36864 pages, LIFO batch:9 HighMem zone: 0 pages, LIFO batch:1 DMI 2.0 present. ACPI: Unable to locate RSDP Allocating PCI resources starting at 0a000000 (gap: 0a000000:f5ff0000) Built 1 zonelists Kernel command line: auto BOOT_IMAGE=linux-up ro root=301 splash=silent pci=routeirq bootsplash: silent mode. No local APIC present or hardware disabled mapped APIC to ffffd000 (01141000) Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 199.787 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 158724k/163840k available (1656k kernel code, 4672k reserved, 742k data, 176k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 391.16 BogoMIPS (lpj=195584) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 Intel Pentium with F0 0F bug - workaround enabled. CPU: After all inits, caps: 008001bf 00000000 00000000 00000000 00000000 00000000 00000000 CPU: Intel Pentium MMX stepping 03 Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 337k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=0 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbdf0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe18, dseg 0xf0000 PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup PCI: Using IRQ router VIA [1106/0586] at 0000:00:07.0 pnp: 00:0a: ioport range 0x208-0x20f has been reserved audit: initializing netlink socket (disabled) audit(1116371300.226:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API Activating ISA DMA hang workarounds. vesafb: framebuffer at 0xe0000000, mapped to 0xca800000, using 4096k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:7ee0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 104737 bytes,<6>...found (1024x768, 15803 bytes, v3). Console: switching to colour frame buffer device 128x45 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... pnp: SB audio device quirk - increasing port range isapnp: Card 'Creative ViBRA16C PnP' isapnp: 1 Plug & Play card detected total serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (romfs filesystem) readonly. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: FUJITSU MPF3102AT, ATA DISK drive Probing IDE interface ide1... hdc: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 20015856 sectors (10248 MB) w/512KiB Cache, CHS=19857/16/63 hda: cache flushes not supported hda: hda1 hda4 < hda5 hda6 > EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Trying to move old root to /initrd ... <6>kjournald starting. Commit interval 5 seconds failed Unmounting old root Trying to free ramdisk memory ... okay Freeing unused kernel memory: 176k freed Executing init=/sbin/init Real Time Clock Driver v1.12 Adding 393080k swap on /dev/hda5. Priority:-1 extents:1 EXT3 FS on hda1, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. subfs 0.9 usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: deregistering driver usbfs usbcore: deregistering driver hub input: PC Speaker input: GenPS/2 Genius Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] pnp: Unable to assign resources to device 01:01.00. ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.8/isa/sb/../../alsa-kernel/isa/sb/sb16.c:291: sb16: AUDIO pnp configure failure ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.8/isa/sb/../../alsa-kernel/isa/sb/sb16.c:653: Sound Blaster 16 soundcard not found or device busy ALSA /usr/src/RPM/BUILD/kernel-source-alsa-1.0.8/isa/sb/../../alsa-kernel/isa/sb/sb16.c:657: In case, if you have AWE card, try snd-sbawe module bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 5 changed to on bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (1024x768, 15803 bytes, v3). bootsplash: status on console 11 changed to on e100: Intel(R) PRO/100 Network Driver, 3.3.6-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation PCI: setting IRQ 5 as level-triggered PCI: Assigned IRQ 5 for device 0000:00:0b.0 e100: eth0: e100_probe: addr 0xe3100000, irq 5, MAC addr 00:A0:C9:C5:84:1B irq 5: nobody cared! [<c0136ee2>] __report_bad_irq+0x22/0x80 [<c0136fcf>] note_interrupt+0x6f/0x90 [<c0136a4a>] __do_IRQ+0x14a/0x170 [<c0105571>] do_IRQ+0x21/0x30 [<c0103eaa>] common_interrupt+0x1a/0x20 [<c01368b9>] handle_IRQ_event+0x29/0x70 [<c01369da>] __do_IRQ+0xda/0x170 [<c0105571>] do_IRQ+0x21/0x30 [<c0103eaa>] common_interrupt+0x1a/0x20 [<c011ec07>] __do_softirq+0x37/0x90 [<c011ec87>] do_softirq+0x27/0x30 [<c011ed45>] irq_exit+0x35/0x40 [<c0105576>] do_IRQ+0x26/0x30 [<c0103eaa>] common_interrupt+0x1a/0x20 [<c0136cb1>] setup_irq+0xa1/0x130 [<cad5a950>] e100_intr+0x0/0x150 [e100] [<c0136ea4>] request_irq+0x74/0x90 [<cad5b76a>] e100_up+0x9a/0x1d0 [e100] [<cad5a950>] e100_intr+0x0/0x150 [e100] [<cad5c93e>] e100_open+0x1e/0x60 [e100] [<c023e106>] dev_open+0x56/0x70 [<c023f6a1>] dev_change_flags+0x51/0x120 [<c028130a>] devinet_ioctl+0x49a/0x540 [<c0283266>] inet_ioctl+0x76/0x80 [<c023559f>] sock_ioctl+0x17f/0x230 [<c01686dc>] do_ioctl+0x5c/0x70 [<c01688c3>] vfs_ioctl+0x53/0x1c0 [<c0168a8d>] sys_ioctl+0x5d/0x70 [<c0102f87>] syscall_call+0x7/0xb handlers: [<cad5a950>] (e100_intr+0x0/0x150 [e100]) Disabling IRQ #5 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex NET: Registered protocol family 17 irq 5: nobody cared! [<c0136ee2>] __report_bad_irq+0x22/0x80 [<c0136fcf>] note_interrupt+0x6f/0x90 [<c0136a4a>] __do_IRQ+0x14a/0x170 [<c0105571>] do_IRQ+0x21/0x30 [<c0103eaa>] common_interrupt+0x1a/0x20 [<c011ec07>] __do_softirq+0x37/0x90 [<c011ec87>] do_softirq+0x27/0x30 [<c011ed45>] irq_exit+0x35/0x40 [<c0105576>] do_IRQ+0x26/0x30 [<c0103eaa>] common_interrupt+0x1a/0x20 [<c0136cb1>] setup_irq+0xa1/0x130 [<cad5a950>] e100_intr+0x0/0x150 [e100] [<c0136ea4>] request_irq+0x74/0x90 [<cad5b76a>] e100_up+0x9a/0x1d0 [e100] [<cad5a950>] e100_intr+0x0/0x150 [e100] [<cad5c93e>] e100_open+0x1e/0x60 [e100] [<c023e106>] dev_open+0x56/0x70 [<c023f6a1>] dev_change_flags+0x51/0x120 [<c028130a>] devinet_ioctl+0x49a/0x540 [<c0283266>] inet_ioctl+0x76/0x80 [<c023559f>] sock_ioctl+0x17f/0x230 [<c01686dc>] do_ioctl+0x5c/0x70 [<c01688c3>] vfs_ioctl+0x53/0x1c0 [<c0168a8d>] sys_ioctl+0x5d/0x70 [<c0102f87>] syscall_call+0x7/0xb handlers: [<cad5a950>] (e100_intr+0x0/0x150 [e100]) Disabling IRQ #5 e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html PCI: Found IRQ 5 for device 0000:00:08.0 IRQ routing conflict for 0000:00:08.0, have irq 10, want irq 5 eth0: Winbond 89C940 found at 0x6200, IRQ 10, 00:40:95:03:48:C4. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, cable problem? TSR=0x0, ISR=0x0, t=4229. NETDEV WATCHDOG: eth0: transmit timed out eth0: Tx timed out, cable problem? TSR=0x0, ISR=0x0, t=16095. nfs warning: mount version older than kernel