regular-xfce-20211006-aarch64.iso.d/boot/vmlinuz... ok regular-xfce-20211006-aarch64.iso.d/boot/initrd.img... ok EFI stub: Booting Linux Kernel... EFI stub: machine baikal,baikal-m: forcing kernel relocation to low address EFI stub: relocating kernel to 0x81200000 EFI stub: Using DTB from configuration table EFI stub: Loaded initrd from command line option EFI stub: Exiting boot services and installing virtual address map... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd073] [ 0.000000] Linux version 5.14.9-un-def-alt1 (builder@localhost.localdomain) (gcc-11 (GCC) 11.2.1 20210911 (ALT Sisyphus 11.2.1-alt1), GNU ld (GNU Binutils) 2.37.20210928) #1 SMP Thu Sep 30 20:22:37 UTC 2021 [ 0.000000] Machine model: Baikal Electronics MBM [ 0.000000] printk: debug: ignoring loglevel setting. [ 0.000000] efi: EFI v2.70 by Baikal Electronics [ 0.000000] efi: ACPI 2.0=0xfe6e0000 SMBIOS=0xfe620000 SMBIOS 3.0=0xfe600000 MEMATTR=0xfac5f118 MEMRESERVE=0xfa7c1c18 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x0000000bffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0xbfe03d300-0xbfe042fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x0000000bffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000080ffffff] [ 0.000000] node 0: [mem 0x0000000081000000-0x00000000810bffff] [ 0.000000] node 0: [mem 0x00000000810c0000-0x000000008fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x000000009fffffff] [ 0.000000] node 0: [mem 0x00000000a0000000-0x00000000fb0f1fff] [ 0.000000] node 0: [mem 0x00000000fb0f2000-0x00000000fb8dafff] [ 0.000000] node 0: [mem 0x00000000fb8db000-0x00000000fe4bffff] [ 0.000000] node 0: [mem 0x00000000fe4c0000-0x00000000fe5dffff] [ 0.000000] node 0: [mem 0x00000000fe5e0000-0x00000000fe5effff] [ 0.000000] node 0: [mem 0x00000000fe5f0000-0x00000000fe62ffff] [ 0.000000] node 0: [mem 0x00000000fe630000-0x00000000fe65ffff] [ 0.000000] node 0: [mem 0x00000000fe660000-0x00000000fe66ffff] [ 0.000000] node 0: [mem 0x00000000fe670000-0x00000000fe6effff] [ 0.000000] node 0: [mem 0x00000000fe6f0000-0x00000000fe78ffff] [ 0.000000] node 0: [mem 0x00000000fe790000-0x00000000fe7dffff] [ 0.000000] node 0: [mem 0x00000000fe7e0000-0x00000000fe8cffff] [ 0.000000] node 0: [mem 0x00000000fe8d0000-0x00000000ff1dffff] [ 0.000000] node 0: [mem 0x00000000ff1e0000-0x00000000ff26ffff] [ 0.000000] node 0: [mem 0x00000000ff270000-0x00000000ff27ffff] [ 0.000000] node 0: [mem 0x00000000ff280000-0x00000000ff39ffff] [ 0.000000] node 0: [mem 0x00000000ff3a0000-0x00000000ffffffff] [ 0.000000] node 0: [mem 0x0000000880000000-0x0000000bffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bffffffff] [ 0.000000] cma: Reserved 256 MiB at 0x00000000e1000000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 34 pages/cpu s98456 r8192 d32616 u139264 [ 0.000000] pcpu-alloc: s98456 r8192 d32616 u139264 alloc=34*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4128768 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: vmlinuz initrd=initrd.img automatic=http,network:dhcp,server:10.42.0.111,directory:/altlinux/regular-xfce-20211006-aarch64.iso stagename=live earylcon=uart8250,mmio32,0x20230000 audit=0 console=ttyS0,115200n8 ignore_loglevel [ 0.000000] audit: disabled (until reboot) [ 0.000000] Unknown command line parameters: vmlinuz automatic=http,network:dhcp,server:10.42.0.111,directory:/altlinux/regular-xfce-20211006-aarch64.iso stagename=live earylcon=uart8250,mmio32,0x20230000 [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x00000000f67b9000-0x00000000fa7b9000] (64MB) [ 0.000000] Memory: 15775036K/16777216K available (13312K kernel code, 4104K rwdata, 9248K rodata, 6336K init, 1390K bss, 740036K reserved, 262144K cma-reserved) [ 0.000000] ftrace: allocating 43002 entries in 168 pages [ 0.000000] ftrace: allocated 168 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 768 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: Distributor has no Range Selector support [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: 16 PPIs implemented [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000002d100000 [ 0.000000] ITS [mem 0x2d020000-0x2d03ffff] [ 0.000000] ITS@0x000000002d020000: allocated 262144 Devices @880200000 (flat, esz 8, psz 64K, shr 0) [ 0.000000] ITS: using cache flushing for cmd queue [ 0.000000] GICv3: using LPI property table @0x0000000880190000 [ 0.000000] GIC: using cache flushing for LPI property table [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000008801a0000 [ 0.000000] random: get_random_bytes called from start_kernel+0x838/0xa34 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 50.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns [ 0.000000] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns [ 0.000092] Failed to initialize '/soc/timer1@20290000': -22 [ 0.000126] Failed to initialize '/soc/timer2@20290014': -22 [ 0.000157] Failed to initialize '/soc/timer3@20290028': -22 [ 0.000188] Failed to initialize '/soc/timer4@2029003c': -22 [ 0.000630] Console: colour dummy device 80x25 [ 0.000695] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=50000) [ 0.000706] pid_max: default: 32768 minimum: 301 [ 0.000907] LSM: Security Framework initializing [ 0.000927] Yama: becoming mindful. [ 0.000973] AltHa disabled. [ 0.000995] Kiosk: Netlink family registered. [ 0.001101] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.001171] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.002403] rcu: Hierarchical SRCU implementation. [ 0.002757] Platform MSI: its@2d020000 domain created [ 0.002818] PCI/MSI: /soc/interrupt-controller@2d000000/its@2d020000 domain created [ 0.003336] Remapping and enabling EFI services. [ 0.004193] smp: Bringing up secondary CPUs ... [ 0.018634] Detected PIPT I-cache on CPU1 [ 0.018664] GICv3: CPU1: found redistributor 1 region 0:0x000000002d120000 [ 0.018728] GICv3: CPU1: using allocated LPI pending table @0x00000008801b0000 [ 0.018789] CPU1: Booted secondary processor 0x0000000001 [0x411fd073] [ 0.043368] Detected PIPT I-cache on CPU2 [ 0.043400] GICv3: CPU2: found redistributor 100 region 0:0x000000002d140000 [ 0.043471] GICv3: CPU2: using allocated LPI pending table @0x00000008801c0000 [ 0.043536] CPU2: Booted secondary processor 0x0000000100 [0x411fd073] [ 0.058015] Detected PIPT I-cache on CPU3 [ 0.058041] GICv3: CPU3: found redistributor 101 region 0:0x000000002d160000 [ 0.058102] GICv3: CPU3: using allocated LPI pending table @0x00000008801d0000 [ 0.058158] CPU3: Booted secondary processor 0x0000000101 [0x411fd073] [ 0.082803] Detected PIPT I-cache on CPU4 [ 0.082839] GICv3: CPU4: found redistributor 200 region 0:0x000000002d180000 [ 0.082893] GICv3: CPU4: using allocated LPI pending table @0x00000008801e0000 [ 0.082955] CPU4: Booted secondary processor 0x0000000200 [0x411fd073] [ 0.097417] Detected PIPT I-cache on CPU5 [ 0.097449] GICv3: CPU5: found redistributor 201 region 0:0x000000002d1a0000 [ 0.097514] GICv3: CPU5: using allocated LPI pending table @0x00000008801f0000 [ 0.097569] CPU5: Booted secondary processor 0x0000000201 [0x411fd073] [ 0.122383] Detected PIPT I-cache on CPU6 [ 0.122425] GICv3: CPU6: found redistributor 300 region 0:0x000000002d1c0000 [ 0.122493] GICv3: CPU6: using allocated LPI pending table @0x0000000880800000 [ 0.122558] CPU6: Booted secondary processor 0x0000000300 [0x411fd073] [ 0.137043] Detected PIPT I-cache on CPU7 [ 0.137081] GICv3: CPU7: found redistributor 301 region 0:0x000000002d1e0000 [ 0.137144] GICv3: CPU7: using allocated LPI pending table @0x0000000880810000 [ 0.137200] CPU7: Booted secondary processor 0x0000000301 [0x411fd073] [ 0.137261] smp: Brought up 1 node, 8 CPUs [ 0.137299] SMP: Total of 8 processors activated. [ 0.137305] CPU features: detected: 32-bit EL0 Support [ 0.137308] CPU features: detected: 32-bit EL1 Support [ 0.137313] CPU features: detected: CRC32 instructions [ 0.137427] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching [ 0.167071] CPU: All CPU(s) started at EL2 [ 0.167113] alternatives: patching kernel code [ 0.168208] devtmpfs: initialized [ 0.174851] Registered cp15_barrier emulation handler [ 0.174869] Registered setend emulation handler [ 0.174988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.175002] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.178950] pinctrl core: initialized pinctrl subsystem [ 0.179456] SMBIOS 3.0.0 present. [ 0.179469] DMI: Edelweiss TF307-MB-S-D/BM1BM1-D, BIOS 5.3 09/09/2021 [ 0.179860] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.181290] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.181835] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.182510] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.183124] thermal_sys: Registered thermal governor 'fair_share' [ 0.183129] thermal_sys: Registered thermal governor 'bang_bang' [ 0.183134] thermal_sys: Registered thermal governor 'step_wise' [ 0.183138] thermal_sys: Registered thermal governor 'user_space' [ 0.183244] cpuidle: using governor ladder [ 0.183260] cpuidle: using governor menu [ 0.183382] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.183509] ASID allocator initialised with 65536 entries [ 0.183989] Serial: AMBA PL011 UART driver [ 0.191295] platform 30280000.hdmi: Fixing up cyclic dependency with 30260000.vdu_hdmi [ 0.191480] platform hdmi-out: Fixing up cyclic dependency with 30280000.hdmi [ 0.196055] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.196065] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.196070] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.196075] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.199624] ACPI: Interpreter disabled. [ 0.199925] iommu: Default domain type: Translated [ 0.200067] vgaarb: loaded [ 0.200284] usbcore: registered new interface driver usbfs [ 0.200310] usbcore: registered new interface driver hub [ 0.200332] usbcore: registered new device driver usb [ 0.201155] pps_core: LinuxPPS API ver. 1 registered [ 0.201162] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.201172] PTP clock support registered [ 0.201288] EDAC MC: Ver: 3.0.0 [ 0.201590] Registered efivars operations [ 0.202300] NetLabel: Initializing [ 0.202307] NetLabel: domain hash size = 128 [ 0.202311] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.202347] NetLabel: unlabeled traffic allowed by default [ 0.202581] clocksource: Switched to clocksource arch_sys_counter [ 0.227493] VFS: Disk quotas dquot_6.6.0 [ 0.227545] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.227865] pnp: PnP ACPI: disabled [ 0.232486] NET: Registered PF_INET protocol family [ 0.233111] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.237260] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.237385] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.237937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.238476] TCP: Hash tables configured (established 131072 bind 65536) [ 0.238780] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, linear) [ 0.238886] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.239096] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.239425] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.239447] NET: Registered PF_XDP protocol family [ 0.239457] PCI: CLS 0 bytes, default 64 [ 0.239719] Trying to unpack rootfs image as initramfs... [ 0.240258] hw perfevents: enabled with armv8_cortex_a57 PMU driver, 7 counters available [ 0.240451] kvm [1]: IPA Size Limit: 44 bits [ 0.241436] kvm [1]: vgic-v2@10220000 [ 0.241463] kvm [1]: GIC system register CPU interface enabled [ 0.241694] kvm [1]: vgic interrupt IRQ9 [ 0.242048] kvm [1]: Hyp mode initialized successfully [ 0.243032] Initialise system trusted keyrings [ 0.243151] workingset: timestamp_bits=39 max_order=22 bucket_order=0 [ 0.243367] zbud: loaded [ 0.269937] Key type asymmetric registered [ 0.269946] Asymmetric key parser 'x509' registered [ 0.269980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.270097] io scheduler mq-deadline registered [ 0.270140] io scheduler bfq registered [ 0.270541] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 0.270546] crc32: self tests passed, processed 225944 bytes in 184080 nsec [ 0.270621] crc32c: CRC_LE_BITS = 64 [ 0.270625] crc32c: self tests passed, processed 225944 bytes in 30060 nsec [ 0.283835] crc32_combine: 8373 self tests passed [ 0.297028] crc32c_combine: 8373 self tests passed [ 0.299528] gpio-481 (pcie-x8-clock): hogged as output/high [ 0.301106] efifb: probing for efifb [ 0.301365] efifb: No BGRT, not showing boot graphics [ 0.301368] efifb: framebuffer at 0xfb0f2000, using 8100k, total 8100k [ 0.301374] efifb: mode is 1920x1080x32, linelength=7680, pages=1 [ 0.301379] efifb: scrolling: redraw [ 0.301382] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.301500] fbcon: Deferring console take-over [ 0.301506] fb0: EFI VGA frame buffer device [ 0.302137] baikal_clk_probe index 0 name i 0 [ 0.302182] baikal_clk_probe index 1 name i 1 [ 0.302227] baikal_clk_probe index 2 name i 2 [ 0.302269] baikal_clk_probe index 3 name i 3 [ 0.302313] baikal_clk_probe index 4 name i 4 [ 0.302354] baikal_clk_probe index 5 name i 5 [ 0.302397] baikal_clk_probe index 6 name i 6 [ 0.302439] baikal_clk_probe index 7 name i 7 [ 0.302483] baikal_clk_probe index 8 name i 8 [ 0.302525] baikal_clk_probe index 9 name i 9 [ 0.302575] baikal_clk_probe index a name i a [ 0.302619] baikal_clk_probe index b name i b [ 0.302661] baikal_clk_probe index c name i c [ 0.302705] baikal_clk_probe index d name i d [ 0.302747] baikal_clk_probe index e name i e [ 0.302790] baikal_clk_probe index f name i f [ 0.302833] baikal_clk_probe index 10 name i 10 [ 0.302876] baikal_clk_probe index 11 name i 11 [ 0.302922] baikal_clk_probe index 12 name i 12 [ 0.302966] baikal_clk_probe index 13 name i 13 [ 0.303010] baikal_clk_probe index 14 name i 14 [ 0.303054] baikal_clk_probe index 15 name i 15 [ 0.303098] baikal_clk_probe index 16 name i 16 [ 0.303141] baikal_clk_probe index 17 name i 17 [ 0.303185] baikal_clk_probe index 18 name i 18 [ 0.303228] baikal_clk_probe index 19 name i 19 [ 0.303271] baikal_clk_probe index 1a name i 1a [ 0.303314] baikal_clk_probe index 1b name i 1b [ 0.303582] baikal_clk_probe index 0 name i 0 [ 0.303635] baikal_clk_probe index a name i 1 [ 0.303688] baikal_clk_probe index d name i 2 [ 0.303739] baikal_clk_probe index f name i 3 [ 0.303790] baikal_clk_probe index 11 name i 4 [ 0.303914] baikal_clk_probe index 0 name i 0 [ 0.307006] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.308143] printk: console [ttyS0] disabled [ 0.308185] 20230000.serial0: ttyS0 at MMIO 0x20230000 (irq = 41, base_baud = 460122) is a 16550A [ 1.446542] Freeing initrd memory: 42196K [ 1.448862] printk: console [ttyS0] enabled [ 1.449351] 20240000.serial1: ttyS1 at MMIO 0x20240000 (irq = 42, base_baud = 460122) is a 16550A [ 1.902412] msm_serial: driver initialized [ 1.913785] brd: module loaded [ 1.920038] loop: module loaded [ 1.923285] mitx2-bmc 0-0008: mitx2 bmc probe [ 1.928747] mitx2-bmc 0-0008: BMC bootreason[0]->0 [ 1.933720] mitx2-bmc 0-0008: BMC bootreason[1]->0 [ 1.939290] mitx2-bmc 0-0008: BMC extended capabilities 61 [ 1.944798] mitx2-bmc 0-0008: BMC seems to be valid [ 1.949782] input: BMC input dev as /devices/platform/soc/20250000.i2c0/i2c-0/0-0008/input/input0 [ 1.958686] mitx2-bmc 0-0008: Starting polling thread [ 1.964139] platform bmc_pinctrl: BMC pinctrl registered [ 1.971192] libphy: Fixed MDIO Bus: probed [ 1.975436] usbcore: registered new interface driver usbserial_generic [ 1.981997] usbserial: USB Serial support registered for generic [ 1.988036] usbcore: registered new interface driver ch341 [ 1.993548] usbserial: USB Serial support registered for ch341-uart [ 1.999847] usbcore: registered new interface driver cp210x [ 2.005446] usbserial: USB Serial support registered for cp210x [ 2.011394] usbcore: registered new interface driver ftdi_sio [ 2.017165] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.024506] usbcore: registered new interface driver pl2303 [ 2.030105] usbserial: USB Serial support registered for pl2303 [ 2.036181] mousedev: PS/2 mouse device common for all mice [ 2.041889] rtc-efi rtc-efi.0: Baikal-M UEFI has no get_time [ 2.049230] rtc-pcf2127-i2c 0-0051: registered as rtc0 [ 2.054777] rtc-pcf2127-i2c 0-0051: setting system clock to 2021-10-08T14:18:31 UTC (1633702711) [ 2.064403] ledtrig-cpu: registered to indicate activity on CPUs [ 2.070652] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.077622] arm-ccn 9000000.ccn: No access to interrupts, using timer. [ 2.084966] NET: Registered PF_INET6 protocol family [ 2.090511] Segment Routing with IPv6 [ 2.094202] RPL Segment Routing with IPv6 [ 2.098897] registered taskstats version 1 [ 2.103022] Loading compiled-in X.509 certificates [ 2.109313] Loaded X.509 cert 'Build time autogenerated kernel key: 3d9c6de694e886ebd204372fa92dfed3cbb45dd6' [ 2.123216] zswap: loaded using pool zstd/zbud [ 2.127997] Key type ._fscrypt registered [ 2.132047] Key type .fscrypt registered [ 2.135985] Key type fscrypt-provisioning registered [ 2.151225] Key type encrypted registered [ 2.155280] ima: No TPM chip found, activating TPM-bypass! [ 2.160789] ima: Allocated hash algorithm: sha1 [ 2.165356] ima: No architecture policies found [ 2.169933] evm: Initialising EVM extended attributes: [ 2.175088] evm: security.selinux [ 2.178414] evm: security.SMACK64 [ 2.181740] evm: security.SMACK64EXEC [ 2.185412] evm: security.SMACK64TRANSMUTE [ 2.189519] evm: security.SMACK64MMAP [ 2.193191] evm: security.apparmor [ 2.196604] evm: security.ima [ 2.199583] evm: security.capability [ 2.203168] evm: HMAC attrs: 0x1 [ 2.209753] dw-apb-uart 20230000.serial0: forbid DMA for kernel console [ 2.221204] Freeing unused kernel memory: 6336K [ 2.236655] rodata_test: all tests were successful [ 2.241482] Run /init as init process [ 2.245160] with arguments: [ 2.248139] /init [ 2.250420] vmlinuz [ 2.252875] with environment: [ 2.256026] HOME=/ [ 2.258396] TERM=linux [ 2.261114] automatic=http,network:dhcp,server:10.42.0.111,directory:/altlinux/regular-xfce-20211006-aarch64.iso [ 2.271656] stagename=live [ 2.274720] earylcon=uart8250,mmio32,0x20230000 [ 2.240074] INITRAMFS: version 2.24.0 [ 2.267704] INIT: Entering runlevel: 3 [ 2.302633] Starting shell service: [ DONE ] [ 2.453277] Parsing cmdline arguments: [ DONE ] [ 2.763118] Creating /etc/fstab: [ DONE ] [ 2.851172] Mounting filesystem [/dev]: [ DONE ] [ 2.920167] Mounting filesystem [/sys]: [ DONE ] [ 3.037825] Mounting filesystem [/run]: [ DONE ] [ 3.209083] Setting kernel runtime parameters: [ DONE ] [ 3.301409] Loading modules: [ 3.436958] NET: Registered PF_PACKET protocol family [ 3.457174] FS-Cache: Loaded [ 3.498062] RPC: Registered named UNIX socket transport module. [ 3.504037] RPC: Registered udp transport module. [ 3.508761] RPC: Registered tcp transport module. [ 3.513481] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.569540] FS-Cache: Netfs 'nfs' registered for caching [ DONE ] [ 3.546967] Starting ueventd service: [ DONE ] [ 3.712560] Starting udevd service: [ DONE ] [ 4.192373] SCSI subsystem initialized [ 4.202819] baikal-dwmac 30240000.eth0: IRQ eth_wake_irq not found [ 4.206040] libata version 3.00 loaded. [ 4.209035] baikal-dwmac 30240000.eth0: IRQ eth_lpi not found [ 4.209128] baikal-dwmac 30240000.eth0: PTP uses main clock [ 4.224261] baikal-dwmac 30240000.eth0: Baikal Electronics DWMAC glue driver [ 4.103658] Starting polld service: [ 4.234139] ahci 2c600000.sata0: supply ahci not found, using dummy regulator [ 4.242128] ahci 2c600000.sata0: supply phy not found, using dummy regulator [ 4.249265] ahci 2c600000.sata0: supply target not found, using dummy regulator [ 4.249472] baikal-dwmac 30240000.eth0: User ID: 0x10, Synopsys ID: 0x37 [ 4.256763] ahci 2c600000.sata0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 4.263335] baikal-dwmac 30240000.eth0: DWMAC1000 [ 4.271968] ahci 2c600000.sata0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part ccc apst [ 4.276778] baikal-dwmac 30240000.eth0: DMA HW capability register supported [ 4.286546] ahci 2c600000.sata0: port 0 is not capable of FBS [ 4.293599] baikal-dwmac 30240000.eth0: RX Checksum Offload Engine supported [ 4.306457] baikal-dwmac 30240000.eth0: COE Type 2 [ 4.311273] baikal-dwmac 30240000.eth0: TX Checksum insertion supported [ 4.317909] baikal-dwmac 30240000.eth0: Wake-Up On Lan supported [ 4.324026] baikal-dwmac 30240000.eth0: Enhanced/Alternate descriptors [ 4.330583] baikal-dwmac 30240000.eth0: Enabled extended descriptors [ 4.336959] baikal-dwmac 30240000.eth0: Ring mode enabled [ 4.342382] baikal-dwmac 30240000.eth0: Enable RX Mitigation via HW Watchdog Timer [ 4.357478] xhci-hcd 2c400000.dwc3: xHCI Host Controller [ 4.359197] scsi host0: ahci [ 4.362887] xhci-hcd 2c400000.dwc3: new USB bus registered, assigned bus number 1 [ 4.366210] ata1: SATA max UDMA/133 mmio [mem 0x2c600000-0x2c60ffff] port 0x100 irq 53 [ 4.366584] libphy: stmmac: probed [ 4.366598] libphy: fwnode_get_phy_id: considering 'micrel,ksz9031' [ [ 4.366602] libphy: fwnode_get_phy_id: considering 'ethernet-phy-id0022.1620' DONE 4.366613] libphy: fwnode_get_phy_id: considering 'micrel,ksz9031' 10m ] [ 4.366615] libphy: fwnode_get_phy_id: considering 'ethernet-phy-id0022.1620' [ 4.373522] xhci-hcd 2c400000.dwc3: hcc params 0x0230f66d hci version 0x100 quirks 0x0000000000010010 [ 4.381414] ahci 2c610000.sata1: supply ahci not found, using dummy regulator [ 4.383839] baikal-dwmac 30250000.eth1: IRQ eth_wake_irq not found [ 4.383847] baikal-dwmac 30250000.eth1: IRQ eth_lpi not found [ 4.383930] baikal-dwmac 30250000.eth1: PTP uses main clock [ 4.383943] baikal-dwmac 30250000.eth1: Baikal Electronics DWMAC glue driver [ 4.384073] baikal-dwmac 30250000.eth1: User ID: 0x10, Synopsys ID: 0x37 [ 4.384086] baikal-dwmac 30250000.eth1: DWMAC1000 [ 4.384094] baikal-dwmac 30250000.eth1: DMA HW capability register supported [ 4.384097] baikal-dwmac 30250000.eth1: RX Checksum Offload Engine supported [ 4.384100] baikal-dwmac 30250000.eth1: COE Type 2 [ 4.384104] baikal-dwmac 30250000.eth1: TX Checksum insertion supported [ 4.384107] baikal-dwmac 30250000.eth1: Wake-Up On Lan supported [ 4.384178] baikal-dwmac 30250000.eth1: Enhanced/Alternate descriptors [ 4.384182] baikal-dwmac 30250000.eth1: Enabled extended descriptors [ 4.384185] baikal-dwmac 30250000.eth1: Ring mode enabled [ 4.384188] baikal-dwmac 30250000.eth1: Enable RX Mitigation via HW Watchdog Timer [ 4.384690] xhci-hcd 2c400000.dwc3: irq 60, io mem 0x2c400000 [ 4.391053] ahci 2c610000.sata1: supply phy not found, using dummy regulator [ 4.399611] xhci-hcd 2c400000.dwc3: xHCI Host Controller [ 4.401576] libphy: stmmac: probed [ 4.401583] libphy: fwnode_get_phy_id: considering 'micrel,ksz9031' [ 4.401586] libphy: fwnode_get_phy_id: considering 'ethernet-phy-id0022.1620' [ 4.401594] libphy: fwnode_get_phy_id: considering 'micrel,ksz9031' [ 4.401596] libphy: fwnode_get_phy_id: considering 'ethernet-phy-id0022.1620' [ 4.407176] ahci 2c610000.sata1: supply target not found, using dummy regulator [ 4.414991] xhci-hcd 2c400000.dwc3: new USB bus registered, assigned bus number 2 [ 4.424370] ahci 2c610000.sata1: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode [ 4.431394] xhci-hcd 2c400000.dwc3: Host supports USB 3.0 SuperSpeed [ 4.437583] ahci 2c610000.sata1: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part ccc apst [ 4.443870] hub 1-0:1.0: USB hub found [ 4.448954] ahci 2c610000.sata1: port 0 is not capable of FBS [ 4.456056] hub 1-0:1.0: 2 ports detected [ 4.627048] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.627179] scsi host1: ahci [ 4.635765] hub 2-0:1.0: USB hub found [ 4.638261] ata2: SATA max UDMA/133 mmio [mem 0x2c610000-0x2c61ffff] port 0x100 irq 54 [ 4.641873] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) [ 4.657300] xhci-hcd 2c500000.dwc3: xHCI Host Controller [ 4.662645] xhci-hcd 2c500000.dwc3: new USB bus registered, assigned bus number 3 [ 4.670319] xhci-hcd 2c500000.dwc3: hcc params 0x0268f66d hci version 0x100 quirks 0x0000000000010010 [ 4.679622] xhci-hcd 2c500000.dwc3: irq 63, io mem 0x2c500000 [ 4.685571] xhci-hcd 2c500000.dwc3: xHCI Host Controller [ 4.690905] xhci-hcd 2c500000.dwc3: new USB bus registered, assigned bus number 4 [ 4.698414] xhci-hcd 2c500000.dwc3: Host supports USB 3.0 SuperSpeed [ 4.705242] hub 3-0:1.0: USB hub found [ 4.709051] hub 3-0:1.0: 4 ports detected [ 4.713500] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.721942] hub 4-0:1.0: USB hub found [ 4.725737] hub 4-0:1.0: 2 ports detected [ 4.845623] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.851951] ata1.00: ATA-11: SPCC Solid State Disk, SBFM61.3, max UDMA/133 [ 4.858848] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 32) [ 4.865510] ata1.00: configured for UDMA/133 [ 4.870055] scsi 0:0:0:0: Direct-Access ATA SPCC Solid State 61.3 PQ: 0 ANSI: 5 [ 4.919586] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 4.951583] usb 3-3: new high-speed USB device number 2 using xhci-hcd [ 4.954800] ata2: SATA link down (SStatus 0 SControl 300) [ 4.968807] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 4.976361] sd 0:0:0:0: [sda] Write Protect is off [ 4.981181] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.986295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.003127] sda: sda1 [ 5.013698] sd 0:0:0:0: [sda] Attached SCSI disk [ 5.024117] random: fast init done [ 5.115100] usb-storage 3-3:1.0: USB Mass Storage device detected [ 5.115575] hub 1-1:1.0: USB hub found [ 5.121584] scsi host2: usb-storage 3-3:1.0 [ 5.125095] hub 1-1:1.0: 4 ports detected [ 5.129412] usbcore: registered new interface driver usb-storage [ 5.141722] usbcore: registered new interface driver uas [ 5.223595] usb 3-4: new high-speed USB device number 3 using xhci-hcd [ 5.409041] hub 3-4:1.0: USB hub found [ 5.412879] hub 3-4:1.0: 4 ports detected [ 5.420580] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd [ 5.605774] hid: raw HID events driver (C) Jiri Kosina [ 5.621197] usbcore: registered new interface driver usbhid [ 5.626798] usbhid: USB HID core driver [ 5.634854] input: Logitech USB Keyboard as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C31C.0001/input/input1 [ 5.674585] usb 1-1.3: new full-speed USB device number 4 using xhci-hcd [ 5.700818] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-2c400000.dwc3-1.1/input0 [ 5.713668] input: Logitech USB Keyboard Consumer Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input2 [ 5.780753] input: Logitech USB Keyboard System Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C31C.0002/input/input3 [ 5.796167] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-2c400000.dwc3-1.1/input1 [ 5.853427] input: Logitech USB Receiver as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C52E.0003/input/input4 [ 5.918764] hid-generic 0003:046D:C52E.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-2c400000.dwc3-1.3/input0 [ 5.934241] input: Logitech USB Receiver Mouse as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0004/input/input5 [ 5.948971] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0004/input/input6 [ 6.015716] input: Logitech USB Receiver System Control as /devices/platform/soc/soc:usb2@2c400000/2c400000.dwc3/usb1/1-1/1-1.3/1-1.3:1.1/0003:046D:C52E.0004/input/input7 [ 6.031200] hid-generic 0003:046D:C52E.0004: input,hiddev96,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-2c400000.dwc3-1.3/input1 [ 6.176227] scsi 2:0:0:0: Direct-Access Realtek RTL9210B-CG 1.00 PQ: 0 ANSI: 6 [ 6.187666] sd 2:0:0:0: [sdb] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 6.196979] sd 2:0:0:0: [sdb] Write Protect is off [ 6.201806] sd 2:0:0:0: [sdb] Mode Sense: 37 00 00 08 [ 6.208615] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 6.248123] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 6.255549] GPT:2138503 != 250069679 [ 6.259142] GPT:Alternate GPT header not at the end of the disk. [ 6.265161] GPT:2138503 != 250069679 [ 6.268748] GPT: Use GNU Parted to correct GPT errors. [ 6.273914] sdb: sdb1 sdb2 sdb3 [ 6.283301] sd 2:0:0:0: [sdb] Attached SCSI disk [ 6.796675] Network up (lo): [ DONE ]