18108 2008-12-05 16:11:23 +0300 Не работает веб-камера A4tech PK-35N (gspca) 2009-07-15 17:01:11 +0400 1 1 4 Development Sisyphus kernel-image-std-def unstable all Linux CLOSED FIXED P2 normal --- 1 bikr vt kernelbot placeholder swappy vt qa-sisyphus oldest_to_newest 82269 0 bikr 2008-12-05 16:11:23 +0300 Эта камера использует gspca, в ядре 2.6.25-alt9 она работает. В 2.6.25-alt9 $ dmesg | grep -i "zc\|cam" usb 3-1: Product: PC Camera /usr/src/RPM/BUILD/kernel-source-gspca-1.00.18/gspca_core.c: USB GSPCA camera found.(ZC3XX) /usr/src/RPM/BUILD/kernel-source-gspca-1.00.18/gspca_core.c: [spca5xx_probe:4098] Camera type JPEG /usr/src/RPM/BUILD/kernel-source-gspca-1.00.18/Vimicro/zc3xx.h: [zc3xx_config:515] Sensor ID:11 /usr/src/RPM/BUILD/kernel-source-gspca-1.00.18/Vimicro/zc3xx.h: [zc3xx_config:607] Find Sensor MI0360 zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usbcore: registered new interface driver zc0301 $ lsmod | grep gspca gspca 663888 0 videodev 36992 2 zc0301,gspca usbcore 150896 8 usb_storage,zc0301,usbhid,gspca,libusual,ohci_hcd,ehci_hcd В 2.6.27-alt4 $ dmesg | grep -i "zc\|cam" $ lsmod | grep gspca $ sudo modprobe gspca_zc3xx $ lsmod | grep gspca gspca_zc3xx 51456 0 gspca_main 24576 1 gspca_zc3xx videodev 37248 2 gspca_main,zc0301 usbcore 145264 9 gspca_zc3xx,gspca_main,usbhid,usb_storage,zc0301,libusual,ehci_hcd,ohci_hcd $ dmesg | grep -i "zc\|cam" usbcore: registered new interface driver zc3xx zc3xx: registere $ cat /dev/video0 cat: /dev/video0: Нет такого файла или каталога 82328 1 bikr 2008-12-06 12:06:35 +0300 Последовательный dmesg после подключения камеры: usb 3-1: new full speed USB device using ohci_hcd and address 8 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usb 3-1: No supported image sensor detected usb 3-1: New USB device found, idVendor=0ac8, idProduct=303b usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: PC Camera usb 3-1: Manufacturer: Vimicro Corp. 82330 2 bikr 2008-12-06 12:22:13 +0300 В ядре 2.6.27-alt5: usb 3-1: new full speed USB device using ohci_hcd and address 3 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: New USB device found, idVendor=0ac8, idProduct=303b usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: PC Camera usb 3-1: Manufacturer: Vimicro Corp. Linux video capture interface: v2.00 zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usb 3-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usb 3-1: No supported image sensor detected usbcore: registered new interface driver zc0301 84232 3 silicium 2009-01-11 15:07:50 +0300 Проверьте на свежем ядре, там новый v4l 84409 4 bikr 2009-01-14 15:07:02 +0300 Файл-устройство /dev/video не создаётся. dmesg: usb 3-1: USB disconnect, address 2 usb 3-1: new full speed USB device using ohci_hcd and address 4 usb 3-1: configuration #1 chosen from 1 choice usb 3-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usb 3-1: No supported image sensor detected usb 3-1: New USB device found, idVendor=0ac8, idProduct=303b usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: PC Camera usb 3-1: Manufacturer: Vimicro Corp $ lsmod | grep video videodev 42880 1 zc0301 v4l1_compat 17796 1 videodev video 20368 6 output 6912 1 video $ lsmod | grep gspca 84549 5 swappy 2009-01-18 07:08:29 +0300 Аналогичная ситуация: bash-3.2$ /usr/sbin/lsusb Bus 002 Device 003: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 Webcam bash-3.2# lsmod | grep gspca gspca_zc3xx 52096 0 gspca_main 26368 1 gspca_zc3xx videodev 42880 2 gspca_main,zc0301 usbcore 145264 9 gspca_zc3xx,gspca_main,usbhid,zc0301,usb_storage,libusual,ohci_hcd,ehci_hcd bash-3.2# dmesg | grep -i "zc\|cam" usb 2-3: Product: PC Camera zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10 usb 2-3: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usbcore: registered new interface driver zc0301 usb 2-3: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usb 2-3: Product: PC Camera usbcore: registered new interface driver zc3xx zc3xx: registered usb 3-3: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B) usb 3-3: Product: PC Camera bash-3.2$ ls /dev/video0 ls: невозможно получить доступ к /dev/video0: Нет такого файла или каталога bash-3.2$ uname -a Linux rsc_30658 2.6.27-std-def-alt9 #1 SMP Tue Jan 13 14:46:40 UTC 2009 i686 GNU/Linux Устройство /dev/video0 не создаётся 93204 6 silicium 2009-06-17 15:12:52 +0400 Стоит проверить на текущих ядрах. 93231 7 bikr 2009-06-18 06:48:33 +0400 $ uname -r 2.6.29-std-def-alt3 $ dmesg usb 3-1: USB disconnect, address 2 usb 3-1: new low speed USB device using ohci_hcd and address 16 usb 3-1: New USB device found, idVendor=09da, idProduct=000a usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: PS/2+USB Mouse usb 3-1: Manufacturer: A4Tech usb 3-1: configuration #1 chosen from 1 choice input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:04.0/usb3/3-1/3-1:1.0/input/input14 a4tech 0003:09DA:000A.0004: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:04.0-1/input0 $ lsmod | grep gspca $ cat /dev/video0 cat: /dev/video0: Нет такого файла или каталога 93232 8 bikr 2009-06-18 06:52:58 +0400 Извиняюсь, dmesg был для мыши. Вот для камеры: gspca: main v2.4.0 registered usbcore: registered new interface driver zc3xx zc3xx: registered usbcore: deregistering interface driver zc3xx zc3xx: deregistered gspca: main deregistered usb 3-3: new full speed USB device using ohci_hcd and address 17 usb 3-3: New USB device found, idVendor=0ac8, idProduct=303b usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-3: Product: PC Camera usb 3-3: Manufacturer: Vimicro Corp. usb 3-3: configuration #1 chosen from 1 choice Остальное всё также. 94570 9 swappy 2009-07-12 15:56:30 +0400 видеокамера заработала. ядро 2.6.30-std-def-alt3 http://forum.altlinux.org/index.php/topic,1303.msg51105.html#msg51105 94705 10 bikr 2009-07-15 17:01:11 +0400 Действительно, на 2.6.30-std-def-alt3 теперь работает из коробки