21866 2009-10-07 19:48:09 +0400 TV-тюнер FlyTV Prime 34FM не работает 2013-07-17 14:49:59 +0400 1 1 3 Distributions Branch p7 kernel-modules-v4l-std-def не указана all Linux REOPENED P3 normal --- 1 revasn cas amike aspsk boris ldv mike mithraen oddity revasn revoljycionnopatrioticheskix rider shrek silicium sin vsu zerg qa-p7 oldest_to_newest 101018 0 revasn 2009-10-07 19:48:09 +0400 При переходе на новое ядро 2.6.30 перестал работать тв-тюнер FlyTV Prime 34FM. На ядре 2.6.27 из Branch 5.0 работает с параметрами- в /etc/modprobe.d создан файл saa7134 c содержанием: alias char-major-81 videodev alias char-major-81-0 saa7134 alias char-major-81-1 off alias char-major-81-2 off alias char-major-81-3 off alias char-major-89-* i2c-dev alias snd-card-1 saa7134-alsa options saa7134-alsa index=1 options saa7134 card=3 tuner=38 i2c_scan=1 alsa=1 latency=60 options tuner secam=d были перепробованы разные варианты с изменением card= и tuner=, безрезультатно. Вывод на ядре 2.6.30 dmesg | grep saa7134 [ 5.554496] saa7134 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 5.554500] saa7134[0]: setting pci latency timer to 60 [ 5.554506] saa7134[0]: found at 0000:02:08.0, rev: 1, irq: 17, latency: 60, mmio: 0xf9fff400 [ 5.554513] saa7134[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [ 5.554542] saa7134[0]: board init: gpio is 3b000 [ 5.554545] saa7134[0]: there are different flyvideo cards with different tuners [ 5.554546] saa7134[0]: out there, you might have to use the tuner=<nr> insmod [ 5.554547] saa7134[0]: option to override the default value. [ 5.554617] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:02:08.0/input/input5 [ 5.554709] IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 5.704521] saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff [ 5.704532] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704542] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704550] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704560] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704568] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704577] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704586] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704595] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704604] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704612] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704621] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704630] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704639] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704648] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.704657] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 5.720519] saa7134[0]: i2c scan: found device @ 0x86 [tda9887] [ 5.728517] saa7134[0]: i2c scan: found device @ 0xa0 [eeprom] [ 5.736515] saa7134[0]: i2c scan: found device @ 0xc2 [???] [ 5.856612] tuner 2-0043: chip found @ 0x86 (saa7134[0]) [ 5.888637] saa7134[0]: registered device video0 [v4l2] [ 5.888673] saa7134[0]: registered device vbi0 [ 5.888708] saa7134[0]: registered device radio0 [ 5.994470] saa7134 ALSA driver for DMA sound loaded [ 5.994484] IRQ 17/saa7134[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 5.994505] saa7134[0]/alsa: saa7134[0] at 0xf9fff400 irq 17 registered as card 1 Вывод на ядре 2.6.27 dmesg | grep saa7134 [ 7.493808] saa7134 0000:02:08.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17 [ 7.493812] saa7134[0]: setting pci latency timer to 60 [ 7.493817] saa7134[0]: found at 0000:02:08.0, rev: 1, irq: 17, latency: 60, mmio: 0xf9fff400 [ 7.493824] saa7134[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,insmod option] [ 7.493835] saa7134[0]: board init: gpio is 3b000 [ 7.493838] saa7134[0]: there are different flyvideo cards with different tuners [ 7.493839] saa7134[0]: out there, you might have to use the tuner=<nr> insmod [ 7.493840] saa7134[0]: option to override the default value. [ 7.493911] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:08.0/0000:02:08.0/input/input6 [ 7.652022] saa7134[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff [ 7.652031] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652038] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652045] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652052] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652059] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652066] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652073] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652080] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652086] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652093] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652100] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652107] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652114] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652121] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.652128] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 7.668021] saa7134[0]: i2c scan: found device @ 0x86 [tda9887] [ 7.676020] saa7134[0]: i2c scan: found device @ 0xa0 [eeprom] [ 7.684020] saa7134[0]: i2c scan: found device @ 0xc2 [???] [ 7.756083] tuner' 2-0043: chip found @ 0x86 (saa7134[0]) [ 7.772033] tuner' 2-0061: chip found @ 0xc2 (saa7134[0]) [ 7.832197] saa7134[0]: registered device video0 [v4l2] [ 7.832230] saa7134[0]: registered device vbi0 [ 7.832263] saa7134[0]: registered device radio0 [ 7.845766] saa7134 ALSA driver for DMA sound loaded [ 7.847295] Modules linked in: saa7134_alsa(+) tuner_simple tuner_types tda9887 tda8290 tuner usbhid(+) hid ff_memless snd_hda_intel saa7134 ir_common ppdev(+) v4l2_compat_ioctl32 snd_pcm v4l2_common firewire_ohci videodev snd_timer firewire_core snd_page_alloc v4l1_compat snd_hwdep videobuf_dma_sg videobuf_core snd crc_itu_t ohci_hcd ehci_hcd tveeprom parport_pc 8139too i2c_nforce2 ohci1394 usbcore mii rtc_cmos psmouse soundcore i2c_core sg ieee1394 rtc_core sr_mod rtc_lib parport pcspkr thermal serio_raw cdrom processor evdev button ext3 jbd mbcache ata_generic ahci pata_amd pata_acpi libata dock sd_mod crc_t10dif scsi_mod [ 7.848513] [<f8edb605>] ? alsa_device_init+0x75/0x280 [saa7134_alsa] [ 7.848513] [<f8edb810>] ? saa7134_alsa_init+0x0/0x80 [saa7134_alsa] [ 7.848513] [<f8edb859>] ? saa7134_alsa_init+0x49/0x80 [saa7134_alsa] [ 7.848513] [<f8edb810>] ? saa7134_alsa_init+0x0/0x80 [saa7134_alsa] Вывод lspci-vvk 00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1) Subsystem: ASRock Incorporation Device 0444 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2) Subsystem: ASRock Incorporation Device 0441 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Region 0: I/O ports at 2f00 [size=256] 00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1) Subsystem: ASRock Incorporation Device 0446 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at cc00 [size=64] Region 4: I/O ports at 2d00 [size=64] Region 5: I/O ports at 2e00 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1) Subsystem: ASRock Incorporation Device 0446 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device 0454 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f9eff000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 20 [EHCI]) Subsystem: ASRock Incorporation Device 0455 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at f9efec00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:07.0 Audio device: nVidia Corporation MCP65 High Definition Audio (rev a1) Subsystem: ASRock Incorporation Device 0888 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin B routed to IRQ 20 Region 0: Memory at f9ef8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f9f00000-f9ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation (Wrong ID) Device 0448 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1) (prog-if 85 [Master SecO PriO]) Subsystem: ASRock Incorporation Device 045d Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: I/O ports at 0e00 [size=8] Region 1: I/O ports at 0e20 [size=4] Region 2: I/O ports at 0e40 [size=8] Region 3: I/O ports at 0e60 [size=4] Region 4: I/O ports at b800 [size=16] Region 5: Memory at f9efc000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fa000000-febfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI]) Subsystem: ASRock Incorporation Device 8023 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at f9ff8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: ohci1394 02:08.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01) Subsystem: Animation Technologies Inc. FLY TV PRIME 34FM Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 60 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at f9fff400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: saa7134 02:09.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10) Subsystem: Accton Technology Corporation Device 9211 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx- Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at d800 [size=256] Region 1: Memory at f9fff000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: 8139too 04:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9400 GT] (rev a1) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at ec00 [size=128] [virtual] Expansion ROM at feb80000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia 102117 1 mike 2009-10-26 03:56:45 +0300 http://www.altlinux.org/BugSeverityPolicy 104650 2 revasn 2009-12-21 21:09:03 +0300 Посмотрите пожалуйста вот по этой ссылке http://linuxforum.ru/index.php?showtopic=94769 Там обсуждается аналогичная проблема и пути решения. К сожалению для меня это не очень понятно.С Уважением. 105196 3 revasn 2010-01-06 15:45:18 +0300 Добавляю вывод lsmod | grep saa7134 ядро 2.6.30 [root@comp-Athlon-64-bf921a ~]# lsmod | grep saa7134 saa7134_alsa 11744 1 saa7134 148920 1 saa7134_alsa ir_common 47824 1 saa7134 v4l2_common 15564 2 tuner,saa7134 videodev 35904 3 tuner,saa7134,v4l2_common videobuf_dma_sg 12464 2 saa7134_alsa,saa7134 videobuf_core 18000 2 saa7134,videobuf_dma_sg snd_pcm 74096 3 saa7134_alsa,snd_hda_intel,snd_hda_codec tveeprom 12016 1 saa7134 snd 58180 13 snd_hda_codec_realtek,saa7134_alsa,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer i2c_core 23584 8 nvidia,tda9887,tda8290,tuner,saa7134,v4l2_common,tveeprom,i2c_nforce2 ядро 2.6.27 [root@comp-Athlon-64-bf921a ~]# lsmod | grep saa7134 saa7134_alsa 15520 1 saa7134 149076 1 saa7134_alsa ir_common 50564 1 saa7134 v4l2_compat_ioctl32 5376 1 saa7134 v4l2_common 20352 2 tuner,saa7134 videodev 42880 3 tuner,saa7134,v4l2_common snd_pcm 77316 2 saa7134_alsa,snd_hda_intel videobuf_dma_sg 16388 2 saa7134_alsa,saa7134 videobuf_core 22148 2 saa7134,videobuf_dma_sg tveeprom 16132 1 saa7134 snd 57764 9 saa7134_alsa,snd_hda_intel,snd_pcm,snd_timer,snd_hwdep i2c_core 27156 9 nvidia,tuner_simple,tda9887,tda8290,tuner,saa7134,v4l2_common,tveeprom,i2c_nforce2 [root@comp-Athlon-64-bf921a ~]# 109102 4 revasn 2010-05-07 19:12:52 +0400 Пересобрал модуль v4l-dvb по этой инструкции: http://linuxtv.org/wiki/index.php/How_to_Obtain,_Build_and_Install_V4L-DVB_Device_Drivers а так же по этому примеру: http://unixforum.org/index.php?s=&showtopic=94769&view=findpost&p=927409 и запустил тв-тюнер с параметром card=172 tuner=38. Работает, хотелось бы чтоб в бранче p5 и 5.1 тоже поправили. 109105 5 revoljycionnopatrioticheskix 2010-05-07 21:12:59 +0400 Подписываюсь! Потому-что у меня подобный тюнер и я из-за этой баги боюсь обновляться. 109106 6 revoljycionnopatrioticheskix 2010-05-07 21:15:05 +0400 Выкладывайте пожалуйста пересобранный модуль, rpm пакетом? 133295 7 amike 2012-09-14 15:13:46 +0400 Обновитесь до p6 и используйте новое ядро 3.0.42 или 3.5.3: http://www.altlinux.org/Update 141576 8 revoljycionnopatrioticheskix 2013-07-17 00:36:01 +0400 (В ответ на комментарий №7) > Обновитесь до p6 и используйте новое ядро 3.0.42 или 3.5.3: > > http://www.altlinux.org/Update Обновился до P7, перестал работать звук! (вернее, при максимальных настройках, очень-очень тихо с хрипом...) Чо делать? [root@host-242 ~]# dmesg | grep saa7134 [ 4.645724] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/rc/rc0/input1 [ 4.645728] rc0: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:14.4/0000:03:06.0/rc/rc0 [ 4.853982] saa7134 ALSA driver for DMA sound loaded [root@host-242 ~]# 141589 9 cas 2013-07-17 14:29:26 +0400 На правильный компонент. 141590 10 cas 2013-07-17 14:31:21 +0400 Ядро какое? uname -r Совет: обновить ядро можно командой: update-kernel 141594 11 revoljycionnopatrioticheskix 2013-07-17 14:49:59 +0400 (В ответ на комментарий №10) > Ядро какое? > > uname -r > > Совет: обновить ядро можно командой: > > update-kernel Кудаж его обновлять? Толькочто вроде всю систему обновил [root@host-242 ~]# uname -r 3.8.13.2-std-def-alt1.M70P.1 [root@host-242 ~]#