Attachment 1622 Details for Bug 9988 – dmesg with mem=3300M

dmesg with mem=3300M

dmesg.txt (text/plain), 21.89 KB, created by Konstantin Pavlov on 2006-09-12 15:09:28 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Konstantin Pavlov

Created: 2006-09-12 15:09:28 MSD

Size: 21.89 KB

patch

obsolete

>Bootdata ok (command line is auto BOOT_IMAGE=2616-std26-smp-9.EX ro root=802 mem=3300M)
>Linux version 2.6.16-std26-smp-alt9 (builder@amd64.office.altlinux.ru) (gcc version 3.4.5 20051201 (ALT Linux, build 3.4.5-alt4)) #1 SMP Mon Jul 17 01:40:45 MSD 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
> BIOS-e820: 000000000009b000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
> BIOS-e820: 00000000cff70000 - 00000000cff78000 (ACPI data)
> BIOS-e820: 00000000cff78000 - 00000000cff80000 (ACPI NVS)
> BIOS-e820: 00000000cff80000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f5fe0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x00000000cff72d38
>ACPI: FADT (v001 INTEL  LINDHRST 0x06040000 PTL  0x00000003) @ 0x00000000cff77e3c
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x00000000cff77eb0
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x00000000cff77f48
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x00000000cff77f70
>ACPI: MCFG (v001 PTLTD  	 MCFG   0x06040000  LTP 0x00000000) @ 0x00000000cff77fc0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20030224) @ 0x00000000cff72d74
>ACPI: DSDT (v001  Intel LINDHRST 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000ce400000
>Bootmem setup node 0 0000000000000000-00000000ce400000
>On node 0 totalpages: 832266
>  DMA zone: 3056 pages, LIFO batch:0
>  DMA32 zone: 829210 pages, LIFO batch:31
>  Normal zone: 0 pages, LIFO batch:0
>  HighMem zone: 0 pages, LIFO batch:0
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 2, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x03] address[0xfec80400] gsi_base[48])
>IOAPIC[2]: apic_id 3, version 32, address 0xfec80400, GSI 48-71
>ACPI: IOAPIC (id[0x04] address[0xfec85000] gsi_base[72])
>IOAPIC[3]: apic_id 4, version 32, address 0xfec85000, GSI 72-95
>ACPI: IOAPIC (id[0x05] address[0xfec85400] gsi_base[96])
>IOAPIC[4]: apic_id 5, version 32, address 0xfec85400, GSI 96-119
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>Checking aperture...
>Built 1 zonelists
>Kernel command line: auto BOOT_IMAGE=2616-std26-smp-9.EX ro root=802 mem=3300M
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3000.224 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Memory: 3322600k/3379200k available (1690k kernel code, 56196k reserved, 732k data, 212k init)
>Calibrating delay using timer specific routine.. 6009.27 BogoMIPS (lpj=12018555)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Hyper-Threading is disabled
>CPU0: Thermal monitoring enabled (TM1)
>ACPI: Looking for DSDT in initrd... not found.
>Using local APIC timer interrupts.
>result 12500859
>Detected 12.500 MHz APIC timer.
>Booting processor 1/2 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6000.76 BogoMIPS (lpj=12001532)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Hyper-Threading is disabled
>CPU1: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
>APIC error on CPU1: 00(40)
>Brought up 2 CPUs
>testing NMI watchdog ... OK.
>migration_cost=1280
>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
>Freeing initrd memory: 361k freed
>DMI present.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:0a:01.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0.PXH1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEY1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ1.PXH0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEZ1.PXH1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 *10 11 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>PCI-DMA: Disabling IOMMU.
>PCI: Bridge: 0000:01:00.0
>  IO window: 2000-2fff
>  MEM window: da200000-da2fffff
>  PREFETCH window: dd800000-de7fffff
>PCI: Bridge: 0000:01:00.2
>  IO window: 3000-3fff
>  MEM window: da300000-da3fffff
>  PREFETCH window: de800000-deffffff
>PCI: Bridge: 0000:00:02.0
>  IO window: 2000-3fff
>  MEM window: da100000-da3fffff
>  PREFETCH window: dd800000-deffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: da400000-da4fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: da500000-da5fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Failed to allocate mem resource #9:100000@df800000 for 0000:07:00.0
>PCI: Bridge: 0000:07:00.0
>  IO window: 4000-4fff
>  MEM window: da700000-daffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.2
>  IO window: 5000-5fff
>  MEM window: db000000-db0fffff
>  PREFETCH window: df000000-df7fffff
>PCI: Bridge: 0000:00:07.0
>  IO window: 4000-5fff
>  MEM window: da600000-db0fffff
>  PREFETCH window: df000000-df7fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 6000-6fff
>  MEM window: db100000-dcffffff
>  PREFETCH window: d1000000-d10fffff
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>PCI: Setting latency timer of device 0000:01:00.2 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>PCI: Setting latency timer of device 0000:07:00.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Simple Boot Flag at 0x39 set to 0x1
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>audit: initializing netlink socket (disabled)
>audit(1158067626.752:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie01]
>vesafb: framebuffer at 0xdc000000, mapped to 0xffffc20010100000, using 3072k, total 8128k
>vesafb: mode is 1024x768x16, linelength=2048, pages=4
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>Linux agpgart interface v0.101 (c) Dave Jones
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>isa bounce pool size: 16 pages
>RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>input: AT Translated Set 2 keyboard as /class/input/input0
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>TCP bic registered
>NET: Registered protocol family 1
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>RAMDISK: Compressed image found at block 0
>VFS: Mounted root (romfs filesystem) readonly.
>SCSI subsystem initialized
>3ware Storage Controller device driver for Linux v1.26.02.001.
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:08:01.0[A] -> GSI 72 (level, low) -> IRQ 17
>scsi0 : 3ware Storage Controller
>3w-xxxx: scsi0: Found a 3ware Storage Controller at 0x4040, IRQ: 17.
>  Vendor: 3ware     Model: Logical Disk 0    Rev: 1.2 
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 18
>scsi1 : 3ware 9000 Storage Controller
>3w-9xxx: scsi1: Found a 3ware 9000 Storage Controller at 0xda200000, IRQ: 18.
>3w-9xxx: scsi1: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8.
>  Vendor: AMCC      Model: 9500S-8MI  DISK   Rev: 2.06
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>GSI 19 sharing vector 0xC1 and IRQ 19
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 28 (level, low) -> IRQ 19
>scsi2 : 3ware 9000 Storage Controller
>3w-9xxx: scsi2: Found a 3ware 9000 Storage Controller at 0xda200400, IRQ: 19.
>3w-9xxx: scsi2: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 8.
>  Vendor: AMCC      Model: 9500S-8MI  DISK   Rev: 2.06
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>GSI 20 sharing vector 0xC9 and IRQ 20
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 20
>scsi3 : 3ware 9000 Storage Controller
>3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xda300000, IRQ: 20.
>3w-9xxx: scsi3: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 12.
>GSI 21 sharing vector 0xD1 and IRQ 21
>ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 96 (level, low) -> IRQ 21
>scsi4 : 3ware 9000 Storage Controller
>3w-9xxx: scsi4: Found a 3ware 9000 Storage Controller at 0xdb000000, IRQ: 21.
>3w-9xxx: scsi4: Firmware FE9X 2.06.00.009, BIOS BE9X 2.03.01.051, Ports: 12.
>Losing some ticks... checking if CPU frequency changed.
>  Vendor: AMCC      Model: 9500S-12MI DISK   Rev: 2.06
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sda: 145224064 512-byte hdwr sectors (74355 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>SCSI device sda: drive cache: write back w/ FUA
>SCSI device sda: 145224064 512-byte hdwr sectors (74355 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>SCSI device sda: drive cache: write back w/ FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 5859250176 512-byte hdwr sectors (2999936 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 5859250176 512-byte hdwr sectors (2999936 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
> sdb: unknown partition table
>sd 1:0:0:0: Attached scsi disk sdb
>sdc : very big device. try to use READ CAPACITY(16).
>SCSI device sdc: 5859250176 512-byte hdwr sectors (2999936 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: drive cache: write back, no read (daft)
>sdc : very big device. try to use READ CAPACITY(16).
>SCSI device sdc: 5859250176 512-byte hdwr sectors (2999936 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: drive cache: write back, no read (daft)
> sdc: unknown partition table
>sd 2:0:0:0: Attached scsi disk sdc
>sdd : very big device. try to use READ CAPACITY(16).
>SCSI device sdd: 8788875264 512-byte hdwr sectors (4499904 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 23 00 00 00
>SCSI device sdd: drive cache: write back, no read (daft)
>sdd : very big device. try to use READ CAPACITY(16).
>SCSI device sdd: 8788875264 512-byte hdwr sectors (4499904 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 23 00 00 00
>SCSI device sdd: drive cache: write back, no read (daft)
> sdd: unknown partition table
>sd 4:0:0:0: Attached scsi disk sdd
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>VFS: Mounted root (ext3 filesystem) readonly.
>Trying to move old root to /initrd ... /initrd does not exist. Ignored.
>Unmounting old root
>Trying to free ramdisk memory ... okay
>Freeing unused kernel memory: 212k freed
>Executing init=/sbin/init
>Adding 4145128k swap on /dev/sda1.  Priority:-1 extents:1 across:4145128k
>EXT3 FS on sda2, internal journal
>Real Time Clock Driver v1.12ac
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem dm-0
>Ending clean XFS mount for filesystem: dm-0
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>GSI 22 sharing vector 0xD9 and IRQ 22
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 22, io mem 0xda001000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>MC: drivers/edac/edac_mc.c version edac_mc  Ver: 2.0.0 Jul 17 2006
>MC: drivers/edac/e752x_edac.c: e752x_init_one()
>MC: drivers/edac/e752x_edac.c: e752x_probe1(): mci
>Starting Probe1
>tolm = d0000, remapbase = 100000, remaplimit = 12c000
>MC: drivers/edac/edac_mc.c: edac_mc_add_mc()
>EDAC MC0: Giving out device to "e752x_edac" E7520: PCI 0000:00:00.0
>Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
>Copyright (c) 1999-2005 Intel Corporation.
>GSI 23 sharing vector 0xE1 and IRQ 23
>ACPI: PCI Interrupt 0000:08:02.0[A] -> GSI 76 (level, low) -> IRQ 23
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>GSI 24 sharing vector 0xE9 and IRQ 24
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 24
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 24, io base 0x00001420
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>e1000: 0000:08:02.0: e1000_probe: (PCI:66MHz:32-bit) 00:07:e9:0d:f3:4a
>GSI 25 sharing vector 0x32 and IRQ 25
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 25
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 25, io base 0x00001440
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001460
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>hw_random: RNG not detected
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 312 bytes per conntrack
>NET: Registered protocol family 17
>tg3.c:v3.49 (Feb 2, 2006)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:48:74:f5:b6
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] 
>eth1: dma_rwctrl[76180000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>eth2: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:30:48:74:f5:b7
>eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] 
>eth2: dma_rwctrl[76180000] dma_mask[64-bit]
>e1000: eth0: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
>802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
>All bugs added by David S. Miller <davem@redhat.com>
>vlan1: add 01:00:5e:00:00:01 mcast address to master interface
>vlan5: add 01:00:5e:00:00:01 mcast address to master interface
>vlan7: add 01:00:5e:00:00:01 mcast address to master interface
>input: PC Speaker as /class/input/input1
>FDC 0 is a post-1991 82077
>logips2pp: Detected unknown logitech mouse model 0
>input: PS/2 Logitech Mouse as /class/input/input2
>ts: Compaq touchscreen protocol output
>hw_random: RNG not detected
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
>NFSD: starting 90-second grace period

Actions: View

Attachments on bug 9988: 1622 | 1623 | 1624