Attachment 17210 Details for Bug 51646 – sun50i-h6-repka-pi4-optimal.dts

[patch] sun50i-h6-repka-pi4-optimal.dts

sun50i-h6-repka-pi4-optimal.dts (text/plain), 7.82 KB, created by Pavel Isopenko on 2024-11-19 16:31:42 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Pavel Isopenko

Created: 2024-11-19 16:31:42 MSK

Size: 7.82 KB

patch

obsolete

>// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>// based on the dts, which is:
>// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
>// Copyright (C) 2019 OndÅej Jirman <megous@megous.com>
>
>/dts-v1/;
>
>#include "sun50i-h6.dtsi"
>#include "sun50i-h6-cpu-opp.dtsi"
>#include "sun50i-h6-gpu-opp.dtsi"
>
>#include <dt-bindings/gpio/gpio.h>
>
>/ {
>	model = "Repka-Pi4-Optimal";
>	repka-freq = "1.968 GHz";
>	repka-pinout = "repka-pi4-base";
>	compatible = "rbs,repka-pi4", "allwinner,sun50i-h6";
>
>	aliases {
>		ethernet0 = &emac;
>		serial0 = &uart0;
>		serial1 = &uart1;
>		serial2 = &r_uart;
>
>		spi0 = &spi1;
>		i2c1 = &i2c0;
>		i2c2 = &i2c2;
>		i2c3 = &i2c1;
>		i2c4 = &i2c3;
>
>	};
>
>	chosen {
>		stdout-path = "serial0:115200n8";
>	};
>
>	connector {
>		compatible = "hdmi-connector";
>		type = "a";
>
>		port {
>			hdmi_con_in: endpoint {
>				remote-endpoint = <&hdmi_out_con>;
>			};
>		};
>	};
>
>	ext_osc32k: ext_osc32k_clk {
>		#clock-cells = <0>;
>		compatible = "fixed-clock";
>		clock-frequency = <32768>;
>		clock-output-names = "ext_osc32k";
>	};
>
>	leds {
>		compatible = "gpio-leds";
>
>		led-0 {
>			label = "repka:red:power";
>			gpios = <&r_pio 0 9 GPIO_ACTIVE_LOW>; /* PL9 */
>			linux,default-trigger = "heartbeat";
>		};
>	};
>
>	reg_vcc5v: vcc5v {
>		/* board wide 5V supply directly from the DC jack */
>		compatible = "regulator-fixed";
>		regulator-name = "vcc-5v";
>		regulator-min-microvolt = <5000000>;
>		regulator-max-microvolt = <5000000>;
>		regulator-always-on;
>	};
>
>	reg_vcc33_wifi: vcc33-wifi {
>		/* Always on 3.3V regulator for WiFi and BT */
>		compatible = "regulator-fixed";
>		regulator-name = "vcc33-wifi";
>		regulator-min-microvolt = <3300000>;
>		regulator-max-microvolt = <3300000>;
>		regulator-always-on;
>		vin-supply = <&reg_vcc5v>;
>	};
>
>	reg_vcc_wifi_io: vcc-wifi-io {
>		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
>		compatible = "regulator-fixed";
>		regulator-name = "vcc-wifi-io";
>		regulator-min-microvolt = <1800000>;
>		regulator-max-microvolt = <1800000>;
>		regulator-always-on;
>		vin-supply = <&reg_vcc33_wifi>;
>	};
>
>	wifi_pwrseq: wifi-pwrseq {
>		compatible = "mmc-pwrseq-simple";
>		clocks = <&rtc 1>;
>		clock-names = "ext_clock";
>		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
>		post-power-on-delay-ms = <200>;
>	};
>};
>
>&ac200_codec {
>	avcc-supply = <&reg_aldo2>;
>	status = "okay";
>};
>
>&ac200_pwm_clk {
>	status = "okay";
>};
>
>&analog {
>	status = "okay";
>};
>
>&cpu0 {
>	cpu-supply = <&reg_dcdca>;
>};
>
>&de {
>	status = "okay";
>};
>
>&dwc3 {
>	status = "okay";
>};
>
>&ehci0 {
>	status = "okay";
>};
>
>&ehci3 {
>	status = "okay";
>};
>
>&ohci0 {
>	status = "okay";
>};
>
>&ohci3 {
>	status = "okay";
>};
>
>&gpu {
>	mali-supply = <&reg_dcdcc>;
>	status = "okay";
>};
>
>&hdmi {
>	status = "okay";
>};
>
>&hdmi_out {
>	hdmi_out_con: endpoint {
>		remote-endpoint = <&hdmi_con_in>;
>	};
>};
>
>&sound_hdmi {
>	status = "okay";
>};
>
>&i2s1 {
>	status = "okay";
>};
>
>&i2s3 {
>	status = "okay"; /* Ð½ÑÐ¶Ð½Ð¾ Ð´Ð»Ñ ac200 */
>};
>
>&mmc0 {
>	vmmc-supply = <&reg_cldo1>;
>	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
>	bus-width = <4>;
>	status = "okay";
>};
>
>&mmc1 {
>	vmmc-supply = <&reg_vcc33_wifi>;
>	vqmmc-supply = <&reg_vcc_wifi_io>;
>	mmc-pwrseq = <&wifi_pwrseq>;
>	bus-width = <4>;
>	non-removable;
>	status = "okay";
>
>	brcm: sdio-wifi@1 {
>		reg = <1>;
>		compatible = "brcm,bcm4329-fmac";
>		interrupt-parent = <&r_pio>;
>		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
>		interrupt-names = "host-wake";
>	};
>};
>
>&mmc2 {
>	vmmc-supply = <&reg_cldo1>;
>	vqmmc-supply = <&reg_bldo2>;
>	cap-mmc-hw-reset;
>	non-removable;
>	bus-width = <8>;
>	status = "okay";
>};
>
>&pcie {
>	vcc-supply = <&reg_bldo2>;
>	vdd-supply = <&reg_dcdcd>;
>	slot-supply = <&reg_vcc33_wifi>;
>	perst-gpio = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
>	/* clkreq-gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; */
>	/* wake-gpio = <&r_pio 0 4 0>; */
>	status = "okay";
>};
>
>&pio {
>	vcc-pc-supply = <&reg_bldo2>;
>	vcc-pd-supply = <&reg_cldo1>;
>	vcc-pg-supply = <&reg_vcc_wifi_io>;
>};
>
>&r_i2c {
>	status = "okay";
>
>	axp805: pmic@36 {
>		compatible = "x-powers,axp805", "x-powers,axp806";
>		reg = <0x36>;
>		interrupt-parent = <&r_intc>;
>		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>		interrupt-controller;
>		#interrupt-cells = <1>;
>		x-powers,self-working-mode;
>		vina-supply = <&reg_vcc5v>;
>		vinb-supply = <&reg_vcc5v>;
>		vinc-supply = <&reg_vcc5v>;
>		vind-supply = <&reg_vcc5v>;
>		vine-supply = <&reg_vcc5v>;
>		aldoin-supply = <&reg_vcc5v>;
>		bldoin-supply = <&reg_vcc5v>;
>		cldoin-supply = <&reg_vcc5v>;
>
>		regulators {
>			reg_aldo1: aldo1 {
>				regulator-always-on;
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc-pl-led-ir";
>			};
>
>			reg_aldo2: aldo2 {
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc33-audio-tv-ephy-mac";
>			};
>
>			reg_aldo3: aldo3 {
>				regulator-always-on;
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
>			};
>
>			reg_bldo1: bldo1 {
>				regulator-always-on;
>				regulator-min-microvolt = <1800000>;
>				regulator-max-microvolt = <1800000>;
>				regulator-name = "vcc18-dram-bias-pll";
>			};
>
>			reg_bldo2: bldo2 {
>				regulator-always-on;
>				regulator-min-microvolt = <1800000>;
>				regulator-max-microvolt = <1800000>;
>				regulator-name = "vcc-efuse-pcie-hdmi-pc";
>			};
>
>			reg_bldo3: bldo3 {
>				regulator-always-on;
>				regulator-min-microvolt = <1800000>;
>				regulator-max-microvolt = <1800000>;
>				regulator-name = "vcc-dcxoio";
>			};
>
>			reg_bldo4: bldo4 {
>				regulator-always-on;
>				regulator-min-microvolt = <1800000>;
>				regulator-max-microvolt = <1800000>;
>				regulator-name = "vcc-dcxoio";
>			};
>
>			reg_cldo1: cldo1 {
>				regulator-always-on;
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
>			};
>
>			reg_cldo2: cldo2 {
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc-wifi-1";
>			};
>
>			reg_cldo3: cldo3 {
>				regulator-min-microvolt = <3300000>;
>				regulator-max-microvolt = <3300000>;
>				regulator-name = "vcc-wifi-2";
>			};
>
>			reg_dcdca: dcdca {
>				regulator-always-on;
>				regulator-min-microvolt = <810000>;
>				regulator-max-microvolt = <1200000>;
>				regulator-ramp-delay = <2500>;
>				regulator-name = "vdd-cpu";
>			};
>
>			reg_dcdcc: dcdcc {
>				regulator-enable-ramp-delay = <32000>;
>				regulator-min-microvolt = <810000>;
>				regulator-max-microvolt = <1080000>;
>				regulator-ramp-delay = <2500>;
>				regulator-name = "vdd-gpu";
>			};
>
>			reg_dcdcd: dcdcd {
>				regulator-always-on;
>				regulator-min-microvolt = <1000000>;
>				regulator-max-microvolt = <1000000>;
>				regulator-name = "vdd-sys";
>			};
>
>			sw {
>				/* unused */
>			};
>		};
>	};
>};
>
>&rtc {
>	clocks = <&ext_osc32k>;
>};
>
>/delete-node/ &spi0;
>
>&uart0 {
>	pinctrl-names = "default";
>	pinctrl-0 = <&uart0_ph_pins>;
>	status = "okay";
>};
>
>&uart1 {
>	pinctrl-names = "default";
>	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
>	uart-has-rtscts;
>	status = "okay";
>
>	bluetooth {
>		compatible = "brcm,bcm4345c5";
>		clocks = <&rtc 1>;
>		clock-names = "lpo";
>		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
>		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
>		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
>		max-speed = <1500000>;
>	};
>};
>
>&usb2otg {
>	dr_mode = "host";
>	status = "okay";
>};
>
>&usb2phy {
>	status = "okay";
>};
>
>&usb3phy {
>	status = "okay";
>};
>
>&i2c3 {
>	status = "okay"; /* Ð½ÑÐ¶Ð½Ð¾ Ð´Ð»Ñ ac200 */
>};
>
>&ac200_ephy_ctl {
>	x-powers,led-polarity = <GPIO_ACTIVE_HIGH>;
>	phy-address = <1>;
>	status = "okay";
>};
>
>&emac {
>	pinctrl-names = "default";
>	pinctrl-0 = <&ext_rmii_pins>;
>	phy-mode = "rmii";
>	phy-handle = <&ext_rmii_phy>;
>	status = "okay";
>};
>
>&mdio {
>	ext_rmii_phy: ethernet-phy@1 {
>		compatible = "ethernet-phy-id0044.1400",
>					 "ethernet-phy-ieee802.3-c22";
>		reg = <1>;
>		resets = <&ac200_ephy_ctl>;
>		reset-names = "phy";
>		clocks = <&ac200_ephy_ctl>;
>	};
>};
>
>&pwm {
>	status = "okay";
>};

Actions: View | Diff

Attachments on bug 51646: 17005 | 17203 | 17207 | 17208 | 17209 | 17210