Attachment 19903 Details for Bug 56567 – dmesg

dmesg

dmesg(1).log (text/x-log), 129.09 KB, created by Kirill Sen on 2025-10-22 21:37:44 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Kirill Sen

Created: 2025-10-22 21:37:44 MSK

Size: 129.09 KB

patch

obsolete

>[ 1600.989306] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1600.989476] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1601.015125] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1601.015131] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1601.035626]  sda: sda1
>[ 1601.035738] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1612.881522] bash (6364): drop_caches: 3
>[ 1662.196988] usb 1-6: USB disconnect, device number 2
>[ 1663.623980] usb 1-8: USB disconnect, device number 3
>[ 1665.261841] usb 2-3.3: USB disconnect, device number 4
>[ 1670.666991] usb 1-8: new high-speed USB device number 6 using xhci_hcd
>[ 1670.794676] usb 1-8: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1670.794687] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1670.794691] usb 1-8: Product: Ugreen Storage Device
>[ 1670.794694] usb 1-8: Manufacturer: Ugreen
>[ 1670.794696] usb 1-8: SerialNumber: 240417850887
>[ 1670.801063] scsi host8: uas
>[ 1671.671262] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1671.779395] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1671.779829] sd 8:0:0:0: [sda] Write Protect is off
>[ 1671.779833] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1671.780327] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1671.780479] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1671.780482] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1671.797978]  sda: sda1
>[ 1671.798078] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1674.029033] bash (6364): drop_caches: 3
>[ 1714.186065] usb 1-8: USB disconnect, device number 6
>[ 1717.359555] usb 1-6: new high-speed USB device number 7 using xhci_hcd
>[ 1717.487081] usb 1-6: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1717.487093] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1717.487096] usb 1-6: Product: Ugreen Storage Device
>[ 1717.487099] usb 1-6: Manufacturer: Ugreen
>[ 1717.487102] usb 1-6: SerialNumber: 240417850887
>[ 1717.492800] scsi host8: uas
>[ 1718.362885] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1718.471219] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1718.471641] sd 8:0:0:0: [sda] Write Protect is off
>[ 1718.471645] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1718.472122] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1718.472286] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1718.472297] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1718.490317]  sda: sda1
>[ 1718.490388] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1721.623316] bash (6364): drop_caches: 3
>[ 1771.975222] usb 1-6: USB disconnect, device number 7
>[ 1788.770062] usb 1-4: new high-speed USB device number 8 using xhci_hcd
>[ 1788.896922] usb 1-4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1788.896933] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1788.896936] usb 1-4: Product: Ugreen Storage Device
>[ 1788.896939] usb 1-4: Manufacturer: Ugreen
>[ 1788.896941] usb 1-4: SerialNumber: 240417850887
>[ 1788.902552] scsi host8: uas
>[ 1789.772310] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1789.880150] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1789.880557] sd 8:0:0:0: [sda] Write Protect is off
>[ 1789.880560] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1789.881241] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1789.881392] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1789.881395] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1789.901131]  sda: sda1
>[ 1789.901269] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1797.233321] usb 1-4: USB disconnect, device number 8
>[ 1800.793502] usb 2-4: new SuperSpeed USB device number 5 using xhci_hcd
>[ 1800.805685] usb 2-4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1800.805696] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1800.805699] usb 2-4: Product: Ugreen Storage Device
>[ 1800.805702] usb 2-4: Manufacturer: Ugreen
>[ 1800.805704] usb 2-4: SerialNumber: 240417850887
>[ 1800.809692] scsi host8: uas
>[ 1801.662842] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1801.765455] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1801.765587] sd 8:0:0:0: [sda] Write Protect is off
>[ 1801.765591] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1801.765748] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1801.792208] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1801.792216] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1801.814564]  sda: sda1
>[ 1801.814744] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1826.650366] usb 2-4: USB disconnect, device number 5
>[ 1829.559147] usb 1-4: new high-speed USB device number 9 using xhci_hcd
>[ 1829.687226] usb 1-4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1829.687237] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1829.687240] usb 1-4: Product: Ugreen Storage Device
>[ 1829.687243] usb 1-4: Manufacturer: Ugreen
>[ 1829.687245] usb 1-4: SerialNumber: 240417850887
>[ 1829.691861] scsi host8: uas
>[ 1830.562114] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1830.769187] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1830.769611] sd 8:0:0:0: [sda] Write Protect is off
>[ 1830.769615] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1830.770433] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1830.770609] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1830.770613] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1830.795076]  sda: sda1
>[ 1830.795199] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1878.283893] bash (6364): drop_caches: 3
>[ 1963.237869] usb 1-4: USB disconnect, device number 9
>[ 1963.532148] usb 1-4: new high-speed USB device number 10 using xhci_hcd
>[ 1963.659180] usb 1-4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 1963.659192] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 1963.659196] usb 1-4: Product: Ugreen Storage Device
>[ 1963.659199] usb 1-4: Manufacturer: Ugreen
>[ 1963.659201] usb 1-4: SerialNumber: 240417850887
>[ 1963.665333] scsi host8: uas
>[ 1963.879966] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 1963.886315] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 1963.886670] sd 8:0:0:0: [sda] Write Protect is off
>[ 1963.886676] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 1963.887243] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 1963.887398] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 1963.887402] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 1963.915118]  sda: sda1
>[ 1963.915269] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 1967.339253] usb 1-4: USB disconnect, device number 10
>[ 2035.039769] usb 1-3: new high-speed USB device number 11 using xhci_hcd
>[ 2035.167558] usb 1-3: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 2035.167569] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 2035.167572] usb 1-3: Product: Ugreen Storage Device
>[ 2035.167575] usb 1-3: Manufacturer: Ugreen
>[ 2035.167578] usb 1-3: SerialNumber: 240417850887
>[ 2035.172378] scsi host8: uas
>[ 2036.042098] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 2036.150263] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 2036.150735] sd 8:0:0:0: [sda] Write Protect is off
>[ 2036.150745] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 2036.151244] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 2036.151401] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 2036.151405] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 2036.179751]  sda: sda1
>[ 2036.179871] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 2051.535402] bash (6364): drop_caches: 3
>[ 2053.125061] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 2053.125581] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 2053.961862] PM: suspend entry (deep)
>[ 2053.964279] Filesystems sync: 0.002 seconds
>[ 2053.985318] Freezing user space processes
>[ 2053.986815] Freezing user space processes completed (elapsed 0.001 seconds)
>[ 2053.986817] OOM killer disabled.
>[ 2053.986818] Freezing remaining freezable tasks
>[ 2053.987933] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 2053.987954] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 2054.036605] serial 00:02: disabled
>[ 2054.037207] serial 00:01: disabled
>[ 2054.311480] ACPI: PM: Preparing to enter system sleep state S3
>[ 2054.313331] ACPI: PM: Saving platform NVS memory
>[ 2054.313363] Disabling non-boot CPUs ...
>[ 2054.315819] smpboot: CPU 15 is now offline
>[ 2054.318636] smpboot: CPU 14 is now offline
>[ 2054.321160] smpboot: CPU 13 is now offline
>[ 2054.323401] smpboot: CPU 12 is now offline
>[ 2054.325193] smpboot: CPU 11 is now offline
>[ 2054.331977] smpboot: CPU 10 is now offline
>[ 2054.338778] smpboot: CPU 9 is now offline
>[ 2054.340977] smpboot: CPU 8 is now offline
>[ 2054.343102] smpboot: CPU 7 is now offline
>[ 2054.348418] smpboot: CPU 6 is now offline
>[ 2054.354559] smpboot: CPU 5 is now offline
>[ 2054.356542] smpboot: CPU 4 is now offline
>[ 2054.361435] smpboot: CPU 3 is now offline
>[ 2054.363291] smpboot: CPU 2 is now offline
>[ 2054.368170] smpboot: CPU 1 is now offline
>[ 2054.378362] ACPI: PM: Low-level resume complete
>[ 2054.378434] ACPI: PM: Restoring platform NVS memory
>[ 2054.379438] Enabling non-boot CPUs ...
>[ 2054.379457] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2054.381217] CPU0: Thermal monitoring enabled (TM1)
>[ 2054.381220] x86/cpu: User Mode Instruction Prevention (UMIP) activated
>[ 2054.381740] CPU1 is up
>[ 2054.381752] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 2054.388759] CPU2 is up
>[ 2054.388772] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 2054.391744] CPU3 is up
>[ 2054.391755] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 2054.398749] CPU4 is up
>[ 2054.398759] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 2054.401744] CPU5 is up
>[ 2054.401753] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 2054.408847] CPU6 is up
>[ 2054.408858] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 2054.411847] CPU7 is up
>[ 2054.411858] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 2054.423050] CPU8 is up
>[ 2054.423064] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 2054.427872] CPU9 is up
>[ 2054.427887] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 2054.439249] CPU10 is up
>[ 2054.439286] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 2054.443027] CPU11 is up
>[ 2054.443050] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 2054.454852] core: cpu_atom PMU driver: 
>[ 2054.454863] ... version:                5
>[ 2054.454866] ... bit width:              48
>[ 2054.454868] ... generic registers:      6
>[ 2054.454869] ... value mask:             0000ffffffffffff
>[ 2054.454871] ... max period:             00007fffffffffff
>[ 2054.454872] ... fixed-purpose events:   3
>[ 2054.454873] ... event mask:             000000070000003f
>[ 2054.456241] CPU12 is up
>[ 2054.456290] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 2054.464995] CPU13 is up
>[ 2054.465032] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 2054.475129] CPU14 is up
>[ 2054.475167] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 2054.485183] CPU15 is up
>[ 2054.496807] ACPI: PM: Waking up from system sleep state S3
>[ 2054.516819] serial 00:01: activated
>[ 2054.518758] serial 00:02: activated
>[ 2054.533544] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 2054.533556] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 2054.533981] nvme nvme0: 8/0/0 default/read/poll queues
>[ 2054.534668] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 2054.547263] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 2054.547269] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 2054.547272] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 2054.689761] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 2054.815971] OOM killer enabled.
>[ 2054.815975] Restarting tasks ... 
>[ 2054.815984] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 2054.817831] done.
>[ 2054.817847] random: crng reseeded on system resumption
>[ 2054.817919] PM: suspend exit
>[ 2054.819790] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 2054.820771] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 2054.820777] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 2054.820881] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 2054.821817] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 2054.843510] ata8: SATA link down (SStatus 4 SControl 300)
>[ 2054.843621] ata7: SATA link down (SStatus 4 SControl 300)
>[ 2054.843914] ata6: SATA link down (SStatus 4 SControl 300)
>[ 2054.844619] ata5: SATA link down (SStatus 4 SControl 300)
>[ 2054.865239] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 2055.026769] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
>[ 2055.026864] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 2055.113945] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 2055.196848] Bluetooth: MGMT ver 1.23
>[ 2058.478672] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 2059.257988] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2059.257991] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2061.324851] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2061.409814] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2061.409822] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2061.443939] wlp2s0: authenticated
>[ 2061.444850] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2061.453556] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=9)
>[ 2061.564997] wlp2s0: associated
>[ 2061.565045] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2073.635175] systemd-journald[726]: Time jumped backwards, rotating.
>[ 2099.917230] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2099.917245] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2099.921053] wlp2s0: authenticated
>[ 2099.922148] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2099.932865] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=254)
>[ 2099.932882] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2101.002129] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2101.114053] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2101.226209] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2105.521847] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2105.521858] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2105.529549] wlp2s0: authenticated
>[ 2105.530883] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2105.539619] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 2105.650149] wlp2s0: associated
>[ 2105.650215] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2212.156246] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2212.156259] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2212.158909] wlp2s0: authenticated
>[ 2212.159105] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2212.175889] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1281)
>[ 2212.175914] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2213.251216] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2213.363133] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2213.475261] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2217.777859] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2217.777871] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2217.792574] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2217.808836] wlp2s0: authenticated
>[ 2217.809810] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2217.837391] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2217.866236] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2217.896928] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2230.675972] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2230.675995] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2230.760327] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2230.760334] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2230.794254] wlp2s0: authenticated
>[ 2230.794870] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2230.804698] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 2230.914042] wlp2s0: associated
>[ 2230.914080] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2269.215406] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2269.215418] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2269.218056] wlp2s0: authenticated
>[ 2269.218291] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2269.226742] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2269.226768] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2270.271615] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2270.383413] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2270.495267] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2274.793955] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2274.793968] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2274.799054] wlp2s0: authenticated
>[ 2274.799881] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2274.809581] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 2274.919255] wlp2s0: associated
>[ 2274.919326] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2347.340448] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2347.340460] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2347.343841] wlp2s0: authenticated
>[ 2347.344312] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2347.356047] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2347.356060] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2348.409413] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2348.521477] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2348.633343] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2352.931068] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2352.931080] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2352.937989] wlp2s0: authenticated
>[ 2352.939948] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2352.948736] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 2353.057418] wlp2s0: associated
>[ 2353.057490] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2391.360451] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2391.360462] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2391.363534] wlp2s0: authenticated
>[ 2391.364482] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2391.375614] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=2047)
>[ 2391.375634] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2392.438512] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2392.550476] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2392.662485] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2407.078390] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2407.078393] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2407.157566] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2407.157576] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2407.194988] wlp2s0: authenticated
>[ 2407.196360] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2407.205664] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2407.309604] wlp2s0: associated
>[ 2407.309653] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2479.728492] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2479.728504] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2479.840655] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2479.843875] wlp2s0: authenticated
>[ 2479.844346] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2479.858766] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=513)
>[ 2479.858795] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2480.944347] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2481.056397] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2481.168328] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2495.048394] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2495.048429] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2495.129870] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2495.129879] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2495.164743] wlp2s0: authenticated
>[ 2495.165300] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2495.175376] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2495.279601] wlp2s0: associated
>[ 2495.279677] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2567.692461] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2567.692473] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2567.696122] wlp2s0: authenticated
>[ 2567.696312] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2567.709990] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1590)
>[ 2567.710011] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 999 TU (1022 ms)
>[ 2568.746604] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2568.858406] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2568.970506] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2573.271064] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2573.271076] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2573.277094] wlp2s0: authenticated
>[ 2573.277961] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2573.289065] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2573.394327] wlp2s0: associated
>[ 2573.394397] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2611.704427] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2611.704439] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2611.712526] wlp2s0: authenticated
>[ 2611.714308] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2611.724714] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2611.724728] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2612.775594] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2612.887400] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2612.999450] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2617.300023] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2617.300034] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2617.305568] wlp2s0: authenticated
>[ 2617.305904] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2617.314086] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2617.423360] wlp2s0: associated
>[ 2617.423426] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2686.246106] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2686.246118] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2686.465662] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 2/3)
>[ 2688.546066] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 3/3)
>[ 2690.593912] wlp2s0: authentication with 34:60:f9:dc:c7:b6 timed out
>[ 2695.067429] wlp2s0: authenticate with 7c:f1:7e:b3:1d:30 (local address=5c:8a:ae:c5:f1:b6)
>[ 2695.067441] wlp2s0: send auth to 7c:f1:7e:b3:1d:30 (try 1/3)
>[ 2697.121417] wlp2s0: send auth to 7c:f1:7e:b3:1d:30 (try 2/3)
>[ 2699.169163] wlp2s0: send auth to 7c:f1:7e:b3:1d:30 (try 3/3)
>[ 2700.072216] wlp2s0: aborting authentication with 7c:f1:7e:b3:1d:30 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 2702.041891] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2702.041894] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2702.143360] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2702.143367] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2702.197870] wlp2s0: authenticated
>[ 2702.198782] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2702.213562] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=179)
>[ 2702.213583] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2703.264739] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2703.294167] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2703.432726] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2717.487719] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2717.487731] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2717.493374] wlp2s0: authenticated
>[ 2717.494603] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2717.509074] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2717.615861] wlp2s0: associated
>[ 2717.615918] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2752.334533] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2752.334546] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2752.348462] wlp2s0: authenticated
>[ 2752.349455] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2752.361565] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2752.361577] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2753.436436] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2753.548382] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2753.660366] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2758.093125] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2758.093137] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2758.203718] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 2/3)
>[ 2758.271241] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 3/3)
>[ 2760.348017] wlp2s0: authentication with 34:60:f9:dc:c7:b6 timed out
>[ 2765.246610] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2765.246622] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2765.265514] wlp2s0: authenticated
>[ 2765.267544] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2765.288443] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2765.395707] wlp2s0: associated
>[ 2765.395748] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2803.837873] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2803.837887] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2805.912822] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 2/3)
>[ 2806.065779] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2806.065791] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2806.179793] wlp2s0: authenticated
>[ 2806.180600] wlp2s0: associate with 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2806.236777] wlp2s0: RX AssocResp from 34:60:f9:dc:c7:b6 (capab=0xc31 status=0 aid=32)
>[ 2806.344967] wlp2s0: associated
>[ 2809.351537] wlp2s0: deauthenticated from 34:60:f9:dc:c7:b6 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
>[ 2813.435191] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2813.435203] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2813.450548] wlp2s0: authenticated
>[ 2813.452061] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2813.470271] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2813.470288] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2814.552073] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2814.672053] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2814.792037] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2819.007801] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2819.007813] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2819.124640] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2819.124660] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2819.171447] wlp2s0: authenticated
>[ 2819.172712] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2819.187002] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2819.295886] wlp2s0: associated
>[ 2819.295979] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2854.015303] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2854.015315] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2854.143412] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 2/3)
>[ 2856.213147] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 3/3)
>[ 2856.389137] wlp2s0: authenticate with 34:60:f9:dc:c7:b6 (local address=5c:8a:ae:c5:f1:b6)
>[ 2856.389149] wlp2s0: send auth to 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2856.489635] wlp2s0: authenticated
>[ 2856.491115] wlp2s0: associate with 34:60:f9:dc:c7:b6 (try 1/3)
>[ 2856.541156] wlp2s0: RX AssocResp from 34:60:f9:dc:c7:b6 (capab=0xc31 status=0 aid=32)
>[ 2856.653383] wlp2s0: associated
>[ 2859.659512] wlp2s0: deauthenticated from 34:60:f9:dc:c7:b6 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
>[ 2863.739577] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2863.739589] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2863.749546] wlp2s0: authenticated
>[ 2863.750618] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2863.763751] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2863.763775] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2864.788460] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2864.802341] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=199)
>[ 2864.802366] wlp2s0: 7c:f1:7e:b3:1d:31 denied association (code=30)
>[ 2865.008475] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2865.008486] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2865.087456] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2865.087462] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2865.123284] wlp2s0: authenticated
>[ 2865.124466] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2865.140457] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2865.252572] wlp2s0: associated
>[ 2865.252616] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2899.969850] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2899.969862] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2900.081782] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2900.086518] wlp2s0: authenticated
>[ 2900.088838] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2900.107596] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2900.107613] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 2901.137691] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 2901.249705] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 2901.361700] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 2905.826421] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2905.826433] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2905.839668] wlp2s0: authenticated
>[ 2905.840279] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2905.854611] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2905.961666] wlp2s0: associated
>[ 2905.961738] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2955.063343] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 2955.064219] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 2955.896416] PM: suspend entry (deep)
>[ 2955.901736] Filesystems sync: 0.005 seconds
>[ 2956.014606] Freezing user space processes
>[ 2956.016534] Freezing user space processes completed (elapsed 0.001 seconds)
>[ 2956.016541] OOM killer disabled.
>[ 2956.016543] Freezing remaining freezable tasks
>[ 2956.017584] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 2956.017626] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 2956.055975] serial 00:02: disabled
>[ 2956.056660] serial 00:01: disabled
>[ 2956.328050] ACPI: PM: Preparing to enter system sleep state S3
>[ 2956.330137] ACPI: PM: Saving platform NVS memory
>[ 2956.330259] Disabling non-boot CPUs ...
>[ 2956.332984] smpboot: CPU 15 is now offline
>[ 2956.335874] smpboot: CPU 14 is now offline
>[ 2956.337885] smpboot: CPU 13 is now offline
>[ 2956.340094] smpboot: CPU 12 is now offline
>[ 2956.342653] smpboot: CPU 11 is now offline
>[ 2956.350720] smpboot: CPU 10 is now offline
>[ 2956.353150] smpboot: CPU 9 is now offline
>[ 2956.359455] smpboot: CPU 8 is now offline
>[ 2956.361655] smpboot: CPU 7 is now offline
>[ 2956.366736] smpboot: CPU 6 is now offline
>[ 2956.368713] smpboot: CPU 5 is now offline
>[ 2956.374296] smpboot: CPU 4 is now offline
>[ 2956.376317] smpboot: CPU 3 is now offline
>[ 2956.382077] smpboot: CPU 2 is now offline
>[ 2956.386455] smpboot: CPU 1 is now offline
>[ 2956.396363] ACPI: PM: Low-level resume complete
>[ 2956.396436] ACPI: PM: Restoring platform NVS memory
>[ 2956.397388] Enabling non-boot CPUs ...
>[ 2956.397408] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 2956.399670] CPU1 is up
>[ 2956.399683] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 2956.407064] CPU2 is up
>[ 2956.407077] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 2956.410049] CPU3 is up
>[ 2956.410060] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 2956.417057] CPU4 is up
>[ 2956.417066] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 2956.420066] CPU5 is up
>[ 2956.420076] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 2956.427160] CPU6 is up
>[ 2956.427172] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 2956.430161] CPU7 is up
>[ 2956.430172] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 2956.441387] CPU8 is up
>[ 2956.441403] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 2956.446230] CPU9 is up
>[ 2956.446267] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 2956.458270] CPU10 is up
>[ 2956.458306] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 2956.463259] CPU11 is up
>[ 2956.463298] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 2956.472845] core: cpu_atom PMU driver: 
>[ 2956.472856] ... version:                5
>[ 2956.472858] ... bit width:              48
>[ 2956.472860] ... generic registers:      6
>[ 2956.472861] ... value mask:             0000ffffffffffff
>[ 2956.472863] ... max period:             00007fffffffffff
>[ 2956.472865] ... fixed-purpose events:   3
>[ 2956.472866] ... event mask:             000000070000003f
>[ 2956.474148] CPU12 is up
>[ 2956.474196] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 2956.482254] CPU13 is up
>[ 2956.482288] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 2956.490354] CPU14 is up
>[ 2956.490393] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 2956.499311] CPU15 is up
>[ 2956.510621] ACPI: PM: Waking up from system sleep state S3
>[ 2956.532748] serial 00:01: activated
>[ 2956.543666] serial 00:02: activated
>[ 2956.549370] nvme nvme0: 8/0/0 default/read/poll queues
>[ 2956.549386] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 2956.549391] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 2956.550002] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 2956.562577] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 2956.562587] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 2956.562591] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 2956.706058] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 2956.832661] OOM killer enabled.
>[ 2956.832667] Restarting tasks ... 
>[ 2956.832594] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 2956.834313] done.
>[ 2956.834333] random: crng reseeded on system resumption
>[ 2956.834363] PM: suspend exit
>[ 2956.836382] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 2956.837371] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 2956.837385] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 2956.843023] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 2956.845368] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 2956.851789] ata6: SATA link down (SStatus 4 SControl 300)
>[ 2956.851855] ata7: SATA link down (SStatus 4 SControl 300)
>[ 2956.851896] ata5: SATA link down (SStatus 4 SControl 300)
>[ 2956.860364] ata8: SATA link down (SStatus 4 SControl 300)
>[ 2956.883552] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 2957.043830] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 2957.136516] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 2957.220540] Bluetooth: MGMT ver 1.23
>[ 2960.488961] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 2961.283327] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2961.283342] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2961.403631] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2961.403638] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2961.441971] wlp2s0: authenticated
>[ 2961.443299] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2961.453472] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 2961.557470] wlp2s0: associated
>[ 2961.557559] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 2997.451930] usb 1-8: new low-speed USB device number 12 using xhci_hcd
>[ 2997.578755] usb 1-8: New USB device found, idVendor=0458, idProduct=003a, bcdDevice= 1.00
>[ 2997.578767] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 2997.578771] usb 1-8: Product: Optical Mouse
>[ 2997.578775] usb 1-8: Manufacturer: Genius
>[ 2997.582808] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0458:003A.0004/input/input18
>[ 2997.582978] hid-generic 0003:0458:003A.0004: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-8/input0
>[ 2999.365661] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 2999.365672] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2999.370203] wlp2s0: authenticated
>[ 2999.370530] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 2999.381809] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 2999.381830] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 3000.435565] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 3000.547703] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 3000.659519] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 3018.342138] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 3018.342142] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3018.420470] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 3018.420478] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3018.457934] wlp2s0: authenticated
>[ 3018.459140] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3018.469329] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 3018.578385] wlp2s0: associated
>[ 3018.578474] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 3034.744959] usb 1-6: new low-speed USB device number 13 using xhci_hcd
>[ 3034.873194] usb 1-6: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
>[ 3034.873203] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 3034.873206] usb 1-6: Product: USB Keyboard
>[ 3034.873209] usb 1-6: Manufacturer: Logitech
>[ 3034.881452] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C31C.0005/input/input19
>[ 3034.964051] hid-generic 0003:046D:C31C.0005: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-6/input0
>[ 3034.969406] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0006/input/input20
>[ 3035.020159] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0006/input/input21
>[ 3035.020407] hid-generic 0003:046D:C31C.0006: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-6/input1
>[ 3047.874717] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 3047.874971] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 3048.752119] PM: hibernation: hibernation entry
>[ 3048.867322] Filesystems sync: 0.006 seconds
>[ 3048.867683] Freezing user space processes
>[ 3048.869697] Freezing user space processes completed (elapsed 0.002 seconds)
>[ 3048.869703] OOM killer disabled.
>[ 3048.869908] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[ 3048.869914] PM: hibernation: Marking nosave pages: [mem 0x0009e000-0x0009efff]
>[ 3048.869917] PM: hibernation: Marking nosave pages: [mem 0x000a0000-0x000fffff]
>[ 3048.869921] PM: hibernation: Marking nosave pages: [mem 0x3a56b000-0x3a6cafff]
>[ 3048.869933] PM: hibernation: Marking nosave pages: [mem 0x3e2b2000-0x3e2b2fff]
>[ 3048.869935] PM: hibernation: Marking nosave pages: [mem 0x4133f000-0x44ffefff]
>[ 3048.870325] PM: hibernation: Marking nosave pages: [mem 0x45000000-0xffffffff]
>[ 3048.880001] PM: hibernation: Basic memory bitmaps created
>[ 3048.880177] PM: hibernation: Preallocating image memory
>[ 3049.292872] PM: hibernation: Allocated 556876 pages for snapshot
>[ 3049.292876] PM: hibernation: Allocated 2227504 kbytes in 0.41 seconds (5432.93 MB/s)
>[ 3049.292878] Freezing remaining freezable tasks
>[ 3049.294151] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 3049.323023] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 3049.326334] serial 00:02: disabled
>[ 3049.326741] serial 00:01: disabled
>[ 3049.630400] ACPI: PM: Preparing to enter system sleep state S4
>[ 3049.632546] ACPI: PM: Saving platform NVS memory
>[ 3049.633959] Disabling non-boot CPUs ...
>[ 3049.636613] smpboot: CPU 15 is now offline
>[ 3049.639510] smpboot: CPU 14 is now offline
>[ 3049.642077] smpboot: CPU 13 is now offline
>[ 3049.644967] smpboot: CPU 12 is now offline
>[ 3049.647627] smpboot: CPU 11 is now offline
>[ 3049.655135] smpboot: CPU 10 is now offline
>[ 3049.661650] smpboot: CPU 9 is now offline
>[ 3049.664045] smpboot: CPU 8 is now offline
>[ 3049.666190] smpboot: CPU 7 is now offline
>[ 3049.671044] smpboot: CPU 6 is now offline
>[ 3049.676719] smpboot: CPU 5 is now offline
>[ 3049.678634] smpboot: CPU 4 is now offline
>[ 3049.683852] smpboot: CPU 3 is now offline
>[ 3049.685729] smpboot: CPU 2 is now offline
>[ 3049.689622] smpboot: CPU 1 is now offline
>[ 3049.694528] PM: hibernation: Creating image:
>[ 3049.858188] PM: hibernation: Need to copy 530240 pages
>[ 3049.858191] PM: hibernation: Normal pages needed: 530240 + 1024, available pages: 3604578
>[ 3049.694839] ACPI: PM: Hardware changed while hibernated, success doubtful!
>[ 3049.694845] ACPI: PM: Restoring platform NVS memory
>[ 3049.695948] Enabling non-boot CPUs ...
>[ 3049.695974] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 3049.698464] CPU1 is up
>[ 3049.698477] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 3049.702031] CPU2 is up
>[ 3049.702043] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 3049.705031] CPU3 is up
>[ 3049.705059] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 3049.708046] CPU4 is up
>[ 3049.708057] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 3049.711073] CPU5 is up
>[ 3049.711083] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 3049.714151] CPU6 is up
>[ 3049.714161] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 3049.717046] CPU7 is up
>[ 3049.717055] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 3049.720086] CPU8 is up
>[ 3049.720096] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 3049.723083] CPU9 is up
>[ 3049.723094] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 3049.726157] CPU10 is up
>[ 3049.726167] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 3049.729125] CPU11 is up
>[ 3049.729136] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 3049.731618] core: cpu_atom PMU driver: 
>[ 3049.731623] ... version:                5
>[ 3049.731624] ... bit width:              48
>[ 3049.731625] ... generic registers:      6
>[ 3049.731625] ... value mask:             0000ffffffffffff
>[ 3049.731626] ... max period:             00007fffffffffff
>[ 3049.731626] ... fixed-purpose events:   3
>[ 3049.731627] ... event mask:             000000070000003f
>[ 3049.732253] CPU12 is up
>[ 3049.732265] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 3049.735356] CPU13 is up
>[ 3049.735392] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 3049.740459] CPU14 is up
>[ 3049.740484] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 3049.744604] CPU15 is up
>[ 3049.753933] ACPI: PM: Waking up from system sleep state S4
>[ 3049.816466] usb usb1: root hub lost power or was reset
>[ 3049.816468] usb usb2: root hub lost power or was reset
>[ 3049.820829] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 3049.820832] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 3049.821338] serial 00:01: activated
>[ 3049.822801] serial 00:02: activated
>[ 3049.828868] nvme nvme0: 8/0/0 default/read/poll queues
>[ 3049.829455] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 3049.830378] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 3049.830383] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 3049.830386] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 3050.077584] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
>[ 3050.137222] ata6: SATA link down (SStatus 4 SControl 300)
>[ 3050.137355] ata7: SATA link down (SStatus 4 SControl 300)
>[ 3050.137440] ata8: SATA link down (SStatus 4 SControl 300)
>[ 3050.137903] ata5: SATA link down (SStatus 4 SControl 300)
>[ 3050.453569] usb 1-6: reset low-speed USB device number 13 using xhci_hcd
>[ 3050.867424] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to polling mode: last cmd=0x20cf0015
>[ 3050.867442] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867449] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867453] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867457] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867459] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867460] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867462] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867463] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867465] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.867466] snd_hda_intel 0000:00:1f.3: spurious response 0x0:0x0, last cmd=0x1f0500
>[ 3050.973673] usb 1-8: reset low-speed USB device number 12 using xhci_hcd
>[ 3051.241358] usb 1-14: WARN: invalid context state for evaluate context command.
>[ 3051.352487] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 3051.587442] usb 1-3: reset high-speed USB device number 11 using xhci_hcd
>[ 3051.823886] usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
>[ 3051.870364] snd_hda_intel 0000:00:1f.3: No response from codec, disabling MSI: last cmd=0x20c70100
>[ 3052.872287] snd_hda_intel 0000:00:1f.3: azx_get_response timeout, switching to single_cmd mode: last cmd=0x20c70100
>[ 3053.095972] PM: hibernation: Basic memory bitmaps freed
>[ 3053.096326] OOM killer enabled.
>[ 3053.096328] Restarting tasks ... 
>[ 3053.096399] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 3053.097961] done.
>[ 3053.097983] PM: hibernation: hibernation exit
>[ 3053.100911] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 3053.101934] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 3053.101948] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 3053.102192] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 3053.102964] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 3053.131280] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 3053.294214] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 3053.395155] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 3053.479157] Bluetooth: MGMT ver 1.23
>[ 3056.653302] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 3057.290127] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 3057.290138] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3057.372035] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 3057.372042] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3057.400030] wlp2s0: authenticated
>[ 3057.401058] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 3057.408698] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=12)
>[ 3057.514219] wlp2s0: associated
>[ 3057.514265] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 3229.742264] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 5: transmit queue 0 timed out 5619 ms
>[ 3229.742342] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[ 3229.754666] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[ 3507.747254] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 5178 ms
>[ 3507.747326] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[ 3507.759685] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[ 3772.751965] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 9: transmit queue 0 timed out 5401 ms
>[ 3772.752028] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[ 3772.764734] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[ 4376.969180] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 4376.969542] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 4376.982030] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[ 4377.747005] PM: suspend entry (deep)
>[ 4377.752448] Filesystems sync: 0.005 seconds
>[ 4377.866806] Freezing user space processes
>[ 4377.868839] Freezing user space processes completed (elapsed 0.002 seconds)
>[ 4377.868847] OOM killer disabled.
>[ 4377.868849] Freezing remaining freezable tasks
>[ 4377.870034] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 4377.870077] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 4377.911881] serial 00:02: disabled
>[ 4377.912572] serial 00:01: disabled
>[ 4378.239299] ACPI: PM: Preparing to enter system sleep state S3
>[ 4378.241273] ACPI: PM: Saving platform NVS memory
>[ 4378.241318] Disabling non-boot CPUs ...
>[ 4378.243888] smpboot: CPU 15 is now offline
>[ 4378.246628] smpboot: CPU 14 is now offline
>[ 4378.249429] smpboot: CPU 13 is now offline
>[ 4378.251303] smpboot: CPU 12 is now offline
>[ 4378.253754] smpboot: CPU 11 is now offline
>[ 4378.261011] smpboot: CPU 10 is now offline
>[ 4378.263398] smpboot: CPU 9 is now offline
>[ 4378.269292] smpboot: CPU 8 is now offline
>[ 4378.271546] smpboot: CPU 7 is now offline
>[ 4378.277544] smpboot: CPU 6 is now offline
>[ 4378.279655] smpboot: CPU 5 is now offline
>[ 4378.284872] smpboot: CPU 4 is now offline
>[ 4378.290760] smpboot: CPU 3 is now offline
>[ 4378.292495] smpboot: CPU 2 is now offline
>[ 4378.296480] smpboot: CPU 1 is now offline
>[ 4378.306742] ACPI: PM: Low-level resume complete
>[ 4378.306813] ACPI: PM: Restoring platform NVS memory
>[ 4378.307785] Enabling non-boot CPUs ...
>[ 4378.307805] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 4378.310048] CPU1 is up
>[ 4378.310060] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 4378.316841] CPU2 is up
>[ 4378.316853] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 4378.319834] CPU3 is up
>[ 4378.319845] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 4378.326816] CPU4 is up
>[ 4378.326826] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 4378.329837] CPU5 is up
>[ 4378.329846] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 4378.336904] CPU6 is up
>[ 4378.336915] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 4378.339931] CPU7 is up
>[ 4378.339942] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 4378.349187] CPU8 is up
>[ 4378.349205] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 4378.352972] CPU9 is up
>[ 4378.352985] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 4378.368165] CPU10 is up
>[ 4378.368181] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 4378.371206] CPU11 is up
>[ 4378.371216] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 4378.381279] core: cpu_atom PMU driver: 
>[ 4378.381290] ... version:                5
>[ 4378.381293] ... bit width:              48
>[ 4378.381295] ... generic registers:      6
>[ 4378.381296] ... value mask:             0000ffffffffffff
>[ 4378.381298] ... max period:             00007fffffffffff
>[ 4378.381300] ... fixed-purpose events:   3
>[ 4378.381301] ... event mask:             000000070000003f
>[ 4378.382645] CPU12 is up
>[ 4378.382687] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 4378.391062] CPU13 is up
>[ 4378.391096] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 4378.399099] CPU14 is up
>[ 4378.399136] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 4378.409237] CPU15 is up
>[ 4378.420396] ACPI: PM: Waking up from system sleep state S3
>[ 4378.440790] serial 00:01: activated
>[ 4378.455780] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 4378.455792] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 4378.455937] serial 00:02: activated
>[ 4378.458116] nvme nvme0: 8/0/0 default/read/poll queues
>[ 4378.458746] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 4378.470342] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 4378.470352] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 4378.470357] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 4378.614793] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 4378.741511] OOM killer enabled.
>[ 4378.741515] Restarting tasks ... 
>[ 4378.741534] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 4378.743004] done.
>[ 4378.743021] random: crng reseeded on system resumption
>[ 4378.743141] PM: suspend exit
>[ 4378.745667] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 4378.746636] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 4378.746641] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 4378.753966] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 4378.756776] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 4378.762126] ata7: SATA link down (SStatus 4 SControl 300)
>[ 4378.762167] ata5: SATA link down (SStatus 4 SControl 300)
>[ 4378.762201] ata6: SATA link down (SStatus 4 SControl 300)
>[ 4378.762498] ata8: SATA link down (SStatus 4 SControl 300)
>[ 4378.784339] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 4378.945755] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 4379.048799] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 4379.131826] Bluetooth: MGMT ver 1.23
>[ 4382.559540] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 4383.186104] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4383.186117] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4383.284015] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4383.284028] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4383.322521] wlp2s0: authenticated
>[ 4383.324065] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4383.334225] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4383.442278] wlp2s0: associated
>[ 4383.442415] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4421.165207] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4421.165220] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4421.169302] wlp2s0: authenticated
>[ 4421.170095] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4421.189282] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 4421.189298] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4422.240151] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4422.352152] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4422.464128] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4436.388069] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4436.388082] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4436.477253] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4436.477264] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4436.515460] wlp2s0: authenticated
>[ 4436.516014] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4436.529711] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4436.639317] wlp2s0: associated
>[ 4436.639426] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4474.951362] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4474.951374] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4474.963603] wlp2s0: authenticated
>[ 4474.964229] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4474.975698] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1041)
>[ 4474.975714] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4476.060364] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4476.172452] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4476.284263] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4480.586001] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4480.586013] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4480.599637] wlp2s0: authenticated
>[ 4480.599861] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4480.612995] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4480.716225] wlp2s0: associated
>[ 4480.716297] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4587.222681] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4587.222693] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4587.226044] wlp2s0: authenticated
>[ 4587.226559] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4587.240803] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1281)
>[ 4587.240819] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4588.308675] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4588.420788] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4588.532654] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4613.593827] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4613.593839] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4613.686599] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4613.686612] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4613.735641] wlp2s0: authenticated
>[ 4613.736802] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4613.748727] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4613.858994] wlp2s0: associated
>[ 4613.859102] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4633.850413] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4633.850425] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4633.854521] wlp2s0: authenticated
>[ 4633.855356] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4633.867459] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=6)
>[ 4633.867487] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4634.897287] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4635.009252] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4635.121429] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4648.068392] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4648.068404] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4648.073516] wlp2s0: authenticated
>[ 4648.074322] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4648.085891] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4648.192760] wlp2s0: associated
>[ 4648.192834] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4661.271597] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 4665.528096] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4665.528099] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4665.644709] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4665.644720] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4665.689397] wlp2s0: authenticated
>[ 4665.690035] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4665.704552] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=13)
>[ 4665.815308] wlp2s0: associated
>[ 4665.815436] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4772.366428] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4772.366431] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4772.376605] wlp2s0: authenticated
>[ 4772.377479] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4772.390507] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1041)
>[ 4772.390520] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4773.447373] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4773.559348] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4773.671373] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4791.184123] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4791.184136] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4791.275813] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4791.275824] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4791.316198] wlp2s0: authenticated
>[ 4791.317020] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4791.326342] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=11)
>[ 4791.438308] wlp2s0: associated
>[ 4791.438460] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4829.763394] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4829.763407] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4829.767399] wlp2s0: authenticated
>[ 4829.768261] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4829.780784] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 4829.780798] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4830.851453] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4830.963369] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4831.075430] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4835.373983] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4835.373996] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4835.381927] wlp2s0: authenticated
>[ 4835.382937] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4835.396029] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=11)
>[ 4835.507233] wlp2s0: associated
>[ 4835.507305] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4907.919702] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4907.919714] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4907.926399] wlp2s0: authenticated
>[ 4907.926586] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4907.937369] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1393)
>[ 4907.937382] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 4908.989638] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4909.101586] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4909.214575] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 4927.163282] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4927.163298] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4927.283571] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4927.283578] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4927.331792] wlp2s0: authenticated
>[ 4927.332195] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4927.343657] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=26)
>[ 4927.452455] wlp2s0: associated
>[ 4927.452564] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 4953.949472] wlp2s0: disassociated from 7c:f1:7e:b3:1d:31 (Reason: 8=DISASSOC_STA_HAS_LEFT)
>[ 4958.093073] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 4958.093085] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 4958.107986] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 4958.122707] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 4958.138144] wlp2s0: authentication with 7c:f1:7e:b3:1d:31 timed out
>[ 5271.150012] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5271.150024] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5271.237638] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5271.237650] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5271.272618] wlp2s0: authenticated
>[ 5271.273951] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5271.283271] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=11)
>[ 5271.387238] wlp2s0: associated
>[ 5271.387373] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5309.694185] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5309.694197] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5309.699297] wlp2s0: authenticated
>[ 5309.700051] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5309.712559] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 5309.712575] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5310.752162] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5310.768740] wlp2s0: deauthenticated from 7c:f1:7e:b3:1d:31 while associating (Reason: 6=CLASS2_FRAME_FROM_NONAUTH_STA)
>[ 5314.670784] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5314.670796] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5314.677183] wlp2s0: authenticated
>[ 5314.677665] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5314.688501] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=11)
>[ 5314.792064] wlp2s0: associated
>[ 5314.792137] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5353.099926] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5353.099942] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5353.117695] wlp2s0: authenticated
>[ 5353.118856] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5353.141105] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5353.164982] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5353.188659] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5372.123584] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5372.123597] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5372.149575] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5372.232466] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5372.232478] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5372.282901] wlp2s0: authenticated
>[ 5372.283450] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5372.293520] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1462)
>[ 5372.293551] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5373.339448] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5373.361234] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5373.483536] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5409.647689] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5409.647701] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5409.728920] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5409.728926] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5409.761846] wlp2s0: authenticated
>[ 5409.762615] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5409.772051] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=14)
>[ 5409.880829] wlp2s0: associated
>[ 5409.975013] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5440.674353] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5440.674365] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5440.677704] wlp2s0: authenticated
>[ 5440.678244] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5440.699905] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1041)
>[ 5440.699920] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5441.750280] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5441.862226] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5441.974224] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5456.303148] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5456.303160] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5456.391529] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5456.391540] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5456.447048] wlp2s0: authenticated
>[ 5456.449164] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5456.463315] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=14)
>[ 5456.573255] wlp2s0: associated
>[ 5456.573300] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5525.160511] rtw89_8852be 0000:02:00.0: timed out to flush queues
>[ 5529.423710] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5529.423725] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5529.535616] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5529.546901] wlp2s0: authenticated
>[ 5529.547563] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5529.559955] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=6)
>[ 5529.559975] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 999 TU (1022 ms)
>[ 5530.639551] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5530.751541] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5530.863538] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5544.296580] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5544.296592] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5544.414120] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5544.414130] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5544.459477] wlp2s0: authenticated
>[ 5544.460508] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5544.472451] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=8)
>[ 5544.582738] wlp2s0: associated
>[ 5544.582800] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5582.875697] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5582.875709] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5582.884450] wlp2s0: authenticated
>[ 5582.885622] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5582.898776] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1041)
>[ 5582.898788] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5583.947566] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5584.067642] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5584.179563] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5588.560264] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5588.560276] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5588.566725] wlp2s0: authenticated
>[ 5588.567112] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5588.580250] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=8)
>[ 5588.683356] wlp2s0: associated
>[ 5588.683452] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5592.206828] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 5596.459649] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5596.459662] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5596.573827] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5596.573836] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5596.614271] wlp2s0: authenticated
>[ 5596.615595] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5596.623773] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=1)
>[ 5596.730770] wlp2s0: associated
>[ 5596.730824] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5635.031716] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5635.031728] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5635.035403] wlp2s0: authenticated
>[ 5635.035601] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5635.060674] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 5635.060694] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5636.103594] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5636.215624] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5636.327602] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5657.892058] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5657.892070] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5657.918985] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5658.023193] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5658.023202] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5658.064801] wlp2s0: authenticated
>[ 5658.065991] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5658.082673] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=1)
>[ 5658.190123] wlp2s0: associated
>[ 5658.190175] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5764.758139] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5764.758151] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5764.769180] wlp2s0: authenticated
>[ 5764.770020] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5764.788145] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 5764.788160] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5765.822082] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5765.847960] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=513)
>[ 5765.847969] wlp2s0: 7c:f1:7e:b3:1d:31 denied association (code=30)
>[ 5766.054020] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5766.054032] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5766.136215] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5766.136222] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5766.173324] wlp2s0: authenticated
>[ 5766.173967] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5766.201120] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5766.225907] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=1)
>[ 5766.334143] wlp2s0: associated
>[ 5766.334191] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5804.712156] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5804.712168] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5804.715843] wlp2s0: authenticated
>[ 5804.716035] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5804.737274] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 5804.737288] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5805.819109] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5805.939025] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5806.051016] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5824.073743] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5824.073756] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5824.103588] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5824.201265] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5824.201275] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5824.239866] wlp2s0: authenticated
>[ 5824.240618] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5824.254195] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 5824.361842] wlp2s0: associated
>[ 5824.361941] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 5965.060281] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5965.060294] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5965.065170] wlp2s0: authenticated
>[ 5965.066124] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5965.091637] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1029)
>[ 5965.091652] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 5966.127161] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 5966.239123] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 5966.351086] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 5970.649827] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 5970.649839] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5970.667481] wlp2s0: authenticated
>[ 5970.667673] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 5970.683031] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 5970.790990] wlp2s0: associated
>[ 5970.883627] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6179.667178] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6179.667190] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6179.676702] wlp2s0: authenticated
>[ 6179.678054] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6179.692692] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=5)
>[ 6179.692705] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6180.767195] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6180.879185] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6180.991148] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6185.309772] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6185.309785] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6185.318384] wlp2s0: authenticated
>[ 6185.319636] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6185.332570] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6185.438927] wlp2s0: associated
>[ 6185.438996] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6223.774883] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6223.774896] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6223.783000] wlp2s0: authenticated
>[ 6223.783778] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6223.795950] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 6223.795971] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6224.859779] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6224.971925] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6225.083909] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6229.397482] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6229.397494] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6229.402775] wlp2s0: authenticated
>[ 6229.403362] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6229.412244] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6229.523746] wlp2s0: associated
>[ 6229.523874] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6267.830593] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6267.830606] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6267.835542] wlp2s0: authenticated
>[ 6267.836556] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6267.848647] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=6)
>[ 6267.848664] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6268.888658] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6269.000580] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6269.112545] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6273.434164] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6273.434180] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6273.439887] wlp2s0: authenticated
>[ 6273.440056] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6273.451326] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6273.560456] wlp2s0: associated
>[ 6273.560522] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6414.216672] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6414.216684] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6414.224089] wlp2s0: authenticated
>[ 6414.225574] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6414.236597] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=48)
>[ 6414.236610] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 999 TU (1022 ms)
>[ 6415.309643] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6415.421642] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6415.533761] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6419.853291] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6419.853304] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6419.864031] wlp2s0: authenticated
>[ 6419.866215] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6419.878503] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6419.989455] wlp2s0: associated
>[ 6420.082176] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6526.524332] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6526.524344] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6526.527737] wlp2s0: authenticated
>[ 6526.528205] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6526.539400] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=318)
>[ 6526.539415] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6527.621393] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6527.733305] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6527.845339] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6542.232123] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6542.232135] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6542.322838] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6542.322849] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6542.360148] wlp2s0: authenticated
>[ 6542.361101] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6542.370614] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6542.476407] wlp2s0: associated
>[ 6542.476480] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6614.878728] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6614.878740] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6614.881533] wlp2s0: authenticated
>[ 6614.881597] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6614.893518] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 6614.893545] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6615.934815] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6616.046777] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6616.158801] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6620.473331] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6620.473343] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6620.479551] wlp2s0: authenticated
>[ 6620.480186] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6620.490006] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6620.598475] wlp2s0: associated
>[ 6620.598538] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6761.244784] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6761.244796] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6761.251350] wlp2s0: authenticated
>[ 6761.251673] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6761.264390] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=2047)
>[ 6761.264411] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6762.291681] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6762.320271] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=513)
>[ 6762.320282] wlp2s0: 7c:f1:7e:b3:1d:31 denied association (code=30)
>[ 6762.525705] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6762.525716] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6762.605296] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6762.605306] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6762.648225] wlp2s0: authenticated
>[ 6762.648585] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6762.664112] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6762.771828] wlp2s0: associated
>[ 6762.771882] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6801.085815] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6801.085827] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6801.092564] wlp2s0: authenticated
>[ 6801.093688] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6801.102598] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 6801.102612] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6802.161747] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6802.280874] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6802.392872] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6806.707412] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6806.707415] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6806.716516] wlp2s0: authenticated
>[ 6806.717259] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6806.727385] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6806.832487] wlp2s0: associated
>[ 6806.832535] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 6947.460865] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6947.460877] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6947.464705] wlp2s0: authenticated
>[ 6947.465749] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6947.477330] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 6947.477357] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 6948.517779] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 6948.629910] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 6948.741794] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 6963.205690] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6963.205702] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6963.283450] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 6963.283461] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6963.317451] wlp2s0: authenticated
>[ 6963.318635] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 6963.330526] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 6963.436937] wlp2s0: associated
>[ 6963.437010] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 7001.763806] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7001.763818] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7001.770623] wlp2s0: authenticated
>[ 7001.771688] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7001.785749] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1595)
>[ 7001.785762] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 999 TU (1022 ms)
>[ 7002.849807] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 7002.961683] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 7003.073766] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 7007.394401] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7007.394413] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7007.403285] wlp2s0: authenticated
>[ 7007.405328] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7007.414929] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=5)
>[ 7007.521657] wlp2s0: associated
>[ 7007.521726] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 7051.209906] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 7051.210603] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 7052.041740] PM: suspend entry (deep)
>[ 7052.046979] Filesystems sync: 0.005 seconds
>[ 7052.162315] Freezing user space processes
>[ 7052.164046] Freezing user space processes completed (elapsed 0.001 seconds)
>[ 7052.164053] OOM killer disabled.
>[ 7052.164055] Freezing remaining freezable tasks
>[ 7052.165006] Freezing remaining freezable tasks completed (elapsed 0.000 seconds)
>[ 7052.165047] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 7052.204322] serial 00:02: disabled
>[ 7052.204987] serial 00:01: disabled
>[ 7052.502215] ACPI: PM: Preparing to enter system sleep state S3
>[ 7052.503983] ACPI: PM: Saving platform NVS memory
>[ 7052.504126] Disabling non-boot CPUs ...
>[ 7052.506438] smpboot: CPU 15 is now offline
>[ 7052.508911] smpboot: CPU 14 is now offline
>[ 7052.511413] smpboot: CPU 13 is now offline
>[ 7052.513336] smpboot: CPU 12 is now offline
>[ 7052.519635] smpboot: CPU 11 is now offline
>[ 7052.521782] smpboot: CPU 10 is now offline
>[ 7052.523898] smpboot: CPU 9 is now offline
>[ 7052.528390] smpboot: CPU 8 is now offline
>[ 7052.534362] smpboot: CPU 7 is now offline
>[ 7052.536363] smpboot: CPU 6 is now offline
>[ 7052.538273] smpboot: CPU 5 is now offline
>[ 7052.542505] smpboot: CPU 4 is now offline
>[ 7052.544267] smpboot: CPU 3 is now offline
>[ 7052.549256] smpboot: CPU 2 is now offline
>[ 7052.553791] smpboot: CPU 1 is now offline
>[ 7052.563849] ACPI: PM: Low-level resume complete
>[ 7052.563924] ACPI: PM: Restoring platform NVS memory
>[ 7052.564860] Enabling non-boot CPUs ...
>[ 7052.564881] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 7052.567142] CPU1 is up
>[ 7052.567154] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 7052.574544] CPU2 is up
>[ 7052.574556] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 7052.577546] CPU3 is up
>[ 7052.577556] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 7052.584584] CPU4 is up
>[ 7052.584595] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 7052.587571] CPU5 is up
>[ 7052.587581] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 7052.594656] CPU6 is up
>[ 7052.594669] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 7052.597696] CPU7 is up
>[ 7052.597725] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 7052.608937] CPU8 is up
>[ 7052.608956] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 7052.612501] CPU9 is up
>[ 7052.612514] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 7052.627890] CPU10 is up
>[ 7052.627905] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 7052.630894] CPU11 is up
>[ 7052.630906] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 7052.640570] core: cpu_atom PMU driver: 
>[ 7052.640580] ... version:                5
>[ 7052.640582] ... bit width:              48
>[ 7052.640584] ... generic registers:      6
>[ 7052.640585] ... value mask:             0000ffffffffffff
>[ 7052.640587] ... max period:             00007fffffffffff
>[ 7052.640588] ... fixed-purpose events:   3
>[ 7052.640589] ... event mask:             000000070000003f
>[ 7052.641755] CPU12 is up
>[ 7052.641794] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 7052.649666] CPU13 is up
>[ 7052.649695] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 7052.657728] CPU14 is up
>[ 7052.657756] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 7052.665836] CPU15 is up
>[ 7052.685301] ACPI: PM: Waking up from system sleep state S3
>[ 7052.707931] serial 00:01: activated
>[ 7052.722767] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 7052.722777] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 7052.723176] serial 00:02: activated
>[ 7052.724652] nvme nvme0: 8/0/0 default/read/poll queues
>[ 7052.725237] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 7052.736080] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 7052.736088] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 7052.736091] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 7052.880448] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 7053.006815] OOM killer enabled.
>[ 7053.006821] Restarting tasks ... 
>[ 7053.006792] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 7053.008854] done.
>[ 7053.008874] random: crng reseeded on system resumption
>[ 7053.008904] PM: suspend exit
>[ 7053.009648] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 7053.010663] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 7053.010676] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 7053.010928] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 7053.011692] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 7053.028995] ata8: SATA link down (SStatus 4 SControl 300)
>[ 7053.029281] ata5: SATA link down (SStatus 4 SControl 300)
>[ 7053.029346] ata7: SATA link down (SStatus 4 SControl 300)
>[ 7053.029943] ata6: SATA link down (SStatus 4 SControl 300)
>[ 7053.050075] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 7053.209305] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 7053.302768] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 7053.387700] Bluetooth: MGMT ver 1.23
>[ 7056.613890] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 7073.020000] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7073.020004] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7074.880779] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 7074.960344] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7074.960353] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7075.001111] wlp2s0: authenticated
>[ 7075.002653] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7075.011808] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=20)
>[ 7075.109850] wlp2s0: associated
>[ 7075.109933] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 7181.572456] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7181.572468] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7181.575452] wlp2s0: authenticated
>[ 7181.576392] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7181.589263] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 7181.589276] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 7182.672388] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 7182.784419] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 7182.896470] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 7187.216052] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 7187.216064] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7187.221718] wlp2s0: authenticated
>[ 7187.221906] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 7187.234602] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=20)
>[ 7187.344423] wlp2s0: associated
>[ 7187.344504] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 7706.549052] bash (15440): drop_caches: 3
>[ 7756.709146] usb 1-6: USB disconnect, device number 13
>[ 7756.946568] usb 1-8: USB disconnect, device number 12
>[ 7762.669036] usb 1-6: new low-speed USB device number 14 using xhci_hcd
>[ 7762.799343] usb 1-6: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
>[ 7762.799356] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 7762.799359] usb 1-6: Product: USB Keyboard
>[ 7762.799362] usb 1-6: Manufacturer: Logitech
>[ 7762.805508] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:046D:C31C.0007/input/input22
>[ 7762.891973] hid-generic 0003:046D:C31C.0007: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-6/input0
>[ 7762.897413] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0008/input/input23
>[ 7762.948375] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:046D:C31C.0008/input/input24
>[ 7762.948689] hid-generic 0003:046D:C31C.0008: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-6/input1
>[ 7766.671720] usb 1-8: new low-speed USB device number 15 using xhci_hcd
>[ 7766.799425] usb 1-8: New USB device found, idVendor=0458, idProduct=003a, bcdDevice= 1.00
>[ 7766.799438] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[ 7766.799442] usb 1-8: Product: Optical Mouse
>[ 7766.799445] usb 1-8: Manufacturer: Genius
>[ 7766.803511] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:0458:003A.0009/input/input25
>[ 7766.854862] hid-generic 0003:0458:003A.0009: input,hidraw2: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-8/input0
>[ 7851.477044] usb 1-3: USB disconnect, device number 11
>[ 7855.101960] usb 2-3.4: new SuperSpeed USB device number 6 using xhci_hcd
>[ 7855.113522] usb 2-3.4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 7855.113526] usb 2-3.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 7855.113529] usb 2-3.4: Product: Ugreen Storage Device
>[ 7855.113531] usb 2-3.4: Manufacturer: Ugreen
>[ 7855.113533] usb 2-3.4: SerialNumber: 240417850887
>[ 7855.148855] scsi host8: uas
>[ 7856.001610] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 7856.105097] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 7856.105222] sd 8:0:0:0: [sda] Write Protect is off
>[ 7856.105226] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 7856.105395] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 7856.129088] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 7856.129096] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 7856.142553]  sda: sda1
>[ 7856.142689] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 7914.628571] usb 2-3.4: USB disconnect, device number 6
>[ 7919.202440] usb 2-3.1: new SuperSpeed USB device number 7 using xhci_hcd
>[ 7919.214198] usb 2-3.1: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 7919.214210] usb 2-3.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 7919.214214] usb 2-3.1: Product: Ugreen Storage Device
>[ 7919.214217] usb 2-3.1: Manufacturer: Ugreen
>[ 7919.214219] usb 2-3.1: SerialNumber: 240417850887
>[ 7919.250791] scsi host8: uas
>[ 7920.103335] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 7920.206240] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 7920.206341] sd 8:0:0:0: [sda] Write Protect is off
>[ 7920.206346] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 7920.206513] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 7920.230202] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 7920.230207] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 7920.248720]  sda: sda1
>[ 7920.248886] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 7931.283061] bash (15440): drop_caches: 3
>[ 7995.570519] usb 2-3.1: USB disconnect, device number 7
>[ 7998.787517] usb 2-3.4: new SuperSpeed USB device number 8 using xhci_hcd
>[ 7998.799367] usb 2-3.4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 7998.799378] usb 2-3.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 7998.799382] usb 2-3.4: Product: Ugreen Storage Device
>[ 7998.799384] usb 2-3.4: Manufacturer: Ugreen
>[ 7998.799386] usb 2-3.4: SerialNumber: 240417850887
>[ 7998.834910] scsi host8: uas
>[ 7999.688004] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 7999.791122] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 7999.791243] sd 8:0:0:0: [sda] Write Protect is off
>[ 7999.791248] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 7999.791483] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 7999.815327] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 7999.815335] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 7999.835853]  sda: sda1
>[ 7999.835957] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 8000.171090] bash (15440): drop_caches: 3
>[ 8085.396358] usb 2-3.4: USB disconnect, device number 8
>[ 8088.725924] usb 2-4: new SuperSpeed USB device number 9 using xhci_hcd
>[ 8088.737825] usb 2-4: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 8088.737837] usb 2-4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 8088.737841] usb 2-4: Product: Ugreen Storage Device
>[ 8088.737844] usb 2-4: Manufacturer: Ugreen
>[ 8088.737846] usb 2-4: SerialNumber: 240417850887
>[ 8088.742229] scsi host8: uas
>[ 8089.595182] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 8089.698104] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 8089.698199] sd 8:0:0:0: [sda] Write Protect is off
>[ 8089.698203] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 8089.698367] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 8089.726674] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 8089.726679] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 8089.742187]  sda: sda1
>[ 8089.742287] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 8091.835824] bash (15440): drop_caches: 3
>[ 8244.730018] usb 2-4: USB disconnect, device number 9
>[ 8274.257998] bash (15440): drop_caches: 3
>[ 8317.164756] usb 2-1: new SuperSpeed Plus Gen 2x1 USB device number 10 using xhci_hcd
>[ 8317.176177] usb 2-1: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[ 8317.176189] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[ 8317.176193] usb 2-1: Product: Ugreen Storage Device
>[ 8317.176197] usb 2-1: Manufacturer: Ugreen
>[ 8317.176199] usb 2-1: SerialNumber: 240417850887
>[ 8317.180857] scsi host8: uas
>[ 8318.035712] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[ 8318.138763] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[ 8318.138906] sd 8:0:0:0: [sda] Write Protect is off
>[ 8318.138911] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[ 8318.139077] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[ 8318.162655] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[ 8318.162662] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[ 8318.175983]  sda: sda1
>[ 8318.176019] sd 8:0:0:0: [sda] Attached SCSI disk
>[ 8329.800938] bash (15440): drop_caches: 3
>[ 9307.643894] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 9307.644313] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 9308.507666] PM: suspend entry (deep)
>[ 9308.510525] Filesystems sync: 0.002 seconds
>[ 9308.625233] Freezing user space processes
>[ 9308.627145] Freezing user space processes completed (elapsed 0.001 seconds)
>[ 9308.627155] OOM killer disabled.
>[ 9308.627157] Freezing remaining freezable tasks
>[ 9308.628318] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 9308.628354] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 9308.665956] serial 00:02: disabled
>[ 9308.666612] serial 00:01: disabled
>[ 9308.991309] ACPI: PM: Preparing to enter system sleep state S3
>[ 9308.993205] ACPI: PM: Saving platform NVS memory
>[ 9308.993373] Disabling non-boot CPUs ...
>[ 9308.995886] smpboot: CPU 15 is now offline
>[ 9308.998506] smpboot: CPU 14 is now offline
>[ 9309.001093] smpboot: CPU 13 is now offline
>[ 9309.002961] smpboot: CPU 12 is now offline
>[ 9309.006905] smpboot: CPU 11 is now offline
>[ 9309.008809] smpboot: CPU 10 is now offline
>[ 9309.011293] smpboot: CPU 9 is now offline
>[ 9309.017917] smpboot: CPU 8 is now offline
>[ 9309.019811] smpboot: CPU 7 is now offline
>[ 9309.023713] smpboot: CPU 6 is now offline
>[ 9309.027614] smpboot: CPU 5 is now offline
>[ 9309.029258] smpboot: CPU 4 is now offline
>[ 9309.032648] smpboot: CPU 3 is now offline
>[ 9309.034311] smpboot: CPU 2 is now offline
>[ 9309.038352] smpboot: CPU 1 is now offline
>[ 9309.048395] ACPI: PM: Low-level resume complete
>[ 9309.048466] ACPI: PM: Restoring platform NVS memory
>[ 9309.049396] Enabling non-boot CPUs ...
>[ 9309.049417] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 9309.051670] CPU1 is up
>[ 9309.051682] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 9309.059075] CPU2 is up
>[ 9309.059088] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 9309.062086] CPU3 is up
>[ 9309.062096] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 9309.069082] CPU4 is up
>[ 9309.069092] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 9309.072120] CPU5 is up
>[ 9309.072130] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 9309.079169] CPU6 is up
>[ 9309.079180] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 9309.082190] CPU7 is up
>[ 9309.082202] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 9309.093438] CPU8 is up
>[ 9309.093456] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 9309.098190] CPU9 is up
>[ 9309.098201] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 9309.109582] CPU10 is up
>[ 9309.109622] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 9309.114305] CPU11 is up
>[ 9309.114317] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 9309.125203] core: cpu_atom PMU driver: 
>[ 9309.125214] ... version:                5
>[ 9309.125216] ... bit width:              48
>[ 9309.125218] ... generic registers:      6
>[ 9309.125220] ... value mask:             0000ffffffffffff
>[ 9309.125222] ... max period:             00007fffffffffff
>[ 9309.125223] ... fixed-purpose events:   3
>[ 9309.125224] ... event mask:             000000070000003f
>[ 9309.126509] CPU12 is up
>[ 9309.126551] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 9309.135263] CPU13 is up
>[ 9309.135297] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 9309.143294] CPU14 is up
>[ 9309.143340] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 9309.151284] CPU15 is up
>[ 9309.162783] ACPI: PM: Waking up from system sleep state S3
>[ 9309.184308] serial 00:01: activated
>[ 9309.199281] serial 00:02: activated
>[ 9309.199975] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 9309.199980] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 9309.201091] nvme nvme0: 8/0/0 default/read/poll queues
>[ 9309.201684] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 9309.213596] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 9309.213602] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 9309.213605] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 9309.357997] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 9309.484039] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 9309.484304] OOM killer enabled.
>[ 9309.484309] Restarting tasks ... done.
>[ 9309.486095] random: crng reseeded on system resumption
>[ 9309.486123] PM: suspend exit
>[ 9309.489219] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 9309.490218] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 9309.490223] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 9309.496727] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 9309.500302] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 9309.513562] ata6: SATA link down (SStatus 4 SControl 300)
>[ 9309.513629] ata8: SATA link down (SStatus 4 SControl 300)
>[ 9309.513701] ata5: SATA link down (SStatus 4 SControl 300)
>[ 9309.513782] ata7: SATA link down (SStatus 4 SControl 300)
>[ 9309.530689] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 9309.692816] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 9309.792451] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 9309.875385] Bluetooth: MGMT ver 1.23
>[ 9313.372637] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 9313.939340] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9313.939357] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9314.041985] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9314.041994] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9314.084589] wlp2s0: authenticated
>[ 9314.085252] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9314.094172] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=21)
>[ 9314.201495] wlp2s0: associated
>[ 9314.201557] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 9591.211136] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9591.211149] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9591.216292] wlp2s0: authenticated
>[ 9591.217020] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9591.226629] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 9591.226645] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 9592.270194] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 9592.382158] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 9592.494204] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 9596.807866] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9596.807878] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9596.815831] wlp2s0: authenticated
>[ 9596.816820] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9596.830757] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=21)
>[ 9596.942047] wlp2s0: associated
>[ 9596.942155] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 9867.764658] wlp2s0: deauthenticating from 7c:f1:7e:b3:1d:31 by local choice (Reason: 3=DEAUTH_LEAVING)
>[ 9867.765435] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 9868.617297] PM: hibernation: hibernation entry
>[ 9868.738668] Filesystems sync: 0.006 seconds
>[ 9868.739039] Freezing user space processes
>[ 9868.741074] Freezing user space processes completed (elapsed 0.002 seconds)
>[ 9868.741081] OOM killer disabled.
>[ 9868.741420] PM: hibernation: Marking nosave pages: [mem 0x00000000-0x00000fff]
>[ 9868.741427] PM: hibernation: Marking nosave pages: [mem 0x0009e000-0x0009efff]
>[ 9868.741430] PM: hibernation: Marking nosave pages: [mem 0x000a0000-0x000fffff]
>[ 9868.741435] PM: hibernation: Marking nosave pages: [mem 0x3a56b000-0x3a6cafff]
>[ 9868.741448] PM: hibernation: Marking nosave pages: [mem 0x3e2b2000-0x3e2b2fff]
>[ 9868.741451] PM: hibernation: Marking nosave pages: [mem 0x4133f000-0x44ffefff]
>[ 9868.741891] PM: hibernation: Marking nosave pages: [mem 0x45000000-0xffffffff]
>[ 9868.752456] PM: hibernation: Basic memory bitmaps created
>[ 9868.752717] PM: hibernation: Preallocating image memory
>[ 9869.173242] PM: hibernation: Allocated 574751 pages for snapshot
>[ 9869.173246] PM: hibernation: Allocated 2299004 kbytes in 0.42 seconds (5473.81 MB/s)
>[ 9869.173248] Freezing remaining freezable tasks
>[ 9869.174522] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
>[ 9869.203390] printk: Suspending console(s) (use no_console_suspend to debug)
>[ 9869.207005] serial 00:02: disabled
>[ 9869.207419] serial 00:01: disabled
>[ 9869.533531] ACPI: PM: Preparing to enter system sleep state S4
>[ 9869.535804] ACPI: PM: Saving platform NVS memory
>[ 9869.537194] Disabling non-boot CPUs ...
>[ 9869.540054] smpboot: CPU 15 is now offline
>[ 9869.542947] smpboot: CPU 14 is now offline
>[ 9869.545684] smpboot: CPU 13 is now offline
>[ 9869.548757] smpboot: CPU 12 is now offline
>[ 9869.551408] smpboot: CPU 11 is now offline
>[ 9869.558111] smpboot: CPU 10 is now offline
>[ 9869.560656] smpboot: CPU 9 is now offline
>[ 9869.566664] smpboot: CPU 8 is now offline
>[ 9869.569034] smpboot: CPU 7 is now offline
>[ 9869.574773] smpboot: CPU 6 is now offline
>[ 9869.580794] smpboot: CPU 5 is now offline
>[ 9869.582609] smpboot: CPU 4 is now offline
>[ 9869.586817] smpboot: CPU 3 is now offline
>[ 9869.588759] smpboot: CPU 2 is now offline
>[ 9869.593473] smpboot: CPU 1 is now offline
>[ 9869.598381] PM: hibernation: Creating image:
>[ 9869.761272] PM: hibernation: Need to copy 548419 pages
>[ 9869.761274] PM: hibernation: Normal pages needed: 548419 + 1024, available pages: 3586406
>[ 9869.598698] ACPI: PM: Hardware changed while hibernated, success doubtful!
>[ 9869.598704] ACPI: PM: Restoring platform NVS memory
>[ 9869.599894] Enabling non-boot CPUs ...
>[ 9869.599919] smpboot: Booting Node 0 Processor 1 APIC 0x1
>[ 9869.602281] CPU1 is up
>[ 9869.602295] smpboot: Booting Node 0 Processor 2 APIC 0x8
>[ 9869.605401] CPU2 is up
>[ 9869.605413] smpboot: Booting Node 0 Processor 3 APIC 0x9
>[ 9869.608364] CPU3 is up
>[ 9869.608373] smpboot: Booting Node 0 Processor 4 APIC 0x10
>[ 9869.611411] CPU4 is up
>[ 9869.611422] smpboot: Booting Node 0 Processor 5 APIC 0x11
>[ 9869.614431] CPU5 is up
>[ 9869.614440] smpboot: Booting Node 0 Processor 6 APIC 0x18
>[ 9869.617429] CPU6 is up
>[ 9869.617439] smpboot: Booting Node 0 Processor 7 APIC 0x19
>[ 9869.620448] CPU7 is up
>[ 9869.620458] smpboot: Booting Node 0 Processor 8 APIC 0x20
>[ 9869.623466] CPU8 is up
>[ 9869.623476] smpboot: Booting Node 0 Processor 9 APIC 0x21
>[ 9869.626462] CPU9 is up
>[ 9869.626472] smpboot: Booting Node 0 Processor 10 APIC 0x28
>[ 9869.629471] CPU10 is up
>[ 9869.629481] smpboot: Booting Node 0 Processor 11 APIC 0x29
>[ 9869.632476] CPU11 is up
>[ 9869.632488] smpboot: Booting Node 0 Processor 12 APIC 0x38
>[ 9869.634988] core: cpu_atom PMU driver: 
>[ 9869.634994] ... version:                5
>[ 9869.634995] ... bit width:              48
>[ 9869.634996] ... generic registers:      6
>[ 9869.634996] ... value mask:             0000ffffffffffff
>[ 9869.634997] ... max period:             00007fffffffffff
>[ 9869.634997] ... fixed-purpose events:   3
>[ 9869.634998] ... event mask:             000000070000003f
>[ 9869.635595] CPU12 is up
>[ 9869.635608] smpboot: Booting Node 0 Processor 13 APIC 0x3a
>[ 9869.638695] CPU13 is up
>[ 9869.638729] smpboot: Booting Node 0 Processor 14 APIC 0x3c
>[ 9869.641713] CPU14 is up
>[ 9869.641742] smpboot: Booting Node 0 Processor 15 APIC 0x3e
>[ 9869.646934] CPU15 is up
>[ 9869.655781] ACPI: PM: Waking up from system sleep state S4
>[ 9869.722215] usb usb1: root hub lost power or was reset
>[ 9869.722218] usb usb2: root hub lost power or was reset
>[ 9869.726709] i915 0000:00:02.0: [drm] GT0: GuC firmware i915/tgl_guc_70.bin version 70.44.1
>[ 9869.726713] i915 0000:00:02.0: [drm] GT0: HuC firmware i915/tgl_huc.bin version 7.9.3
>[ 9869.727040] serial 00:01: activated
>[ 9869.728277] serial 00:02: activated
>[ 9869.734560] i915 0000:00:02.0: [drm] GT0: HuC: authenticated for all workloads
>[ 9869.734566] i915 0000:00:02.0: [drm] GT0: GUC: submission disabled
>[ 9869.734569] i915 0000:00:02.0: [drm] GT0: GUC: SLPC disabled
>[ 9869.735373] nvme nvme0: 8/0/0 default/read/poll queues
>[ 9869.735961] nvme nvme0: Ignoring bogus Namespace Identifiers
>[ 9869.984094] usb 1-9: reset high-speed USB device number 4 using xhci_hcd
>[ 9870.045581] ata7: SATA link down (SStatus 4 SControl 300)
>[ 9870.045647] ata8: SATA link down (SStatus 4 SControl 300)
>[ 9870.045707] ata6: SATA link down (SStatus 4 SControl 300)
>[ 9870.045750] ata5: SATA link down (SStatus 4 SControl 300)
>[ 9870.360148] usb 1-6: reset low-speed USB device number 14 using xhci_hcd
>[ 9870.629322] usb 1-14: WARN: invalid context state for evaluate context command.
>[ 9870.741134] usb 1-14: reset full-speed USB device number 5 using xhci_hcd
>[ 9871.120072] usb 1-8: reset low-speed USB device number 15 using xhci_hcd
>[ 9871.501226] usb 2-1: reset SuperSpeed Plus Gen 2x1 USB device number 10 using xhci_hcd
>[ 9871.625617] usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
>[ 9872.128176] PM: hibernation: Basic memory bitmaps freed
>[ 9872.128560] OOM killer enabled.
>[ 9872.128563] Restarting tasks ... 
>[ 9872.128618] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
>[ 9872.130453] done.
>[ 9872.130994] PM: hibernation: hibernation exit
>[ 9872.132177] Bluetooth: hci0: RTL: examining hci_ver=0b hci_rev=000b lmp_ver=0b lmp_subver=8852
>[ 9872.133167] Bluetooth: hci0: RTL: rom_version status=0 version=1
>[ 9872.133178] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_fw.bin
>[ 9872.133472] Bluetooth: hci0: RTL: loading rtl_bt/rtl8852bu_config.bin
>[ 9872.134173] Bluetooth: hci0: RTL: cfg_sz 6, total sz 57259
>[ 9872.170718] Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
>[ 9872.331223] r8169 0000:03:00.0 enp3s0: Link is Down
>[ 9872.426268] Bluetooth: hci0: RTL: fw version 0x098b154b
>[ 9872.509292] Bluetooth: MGMT ver 1.23
>[ 9875.690167] r8169 0000:03:00.0 enp3s0: Link is Up - 1Gbps/Full - flow control off
>[ 9880.103199] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9880.103202] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9880.195639] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9880.195645] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9880.230498] wlp2s0: authenticated
>[ 9880.231128] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9880.243458] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=25)
>[ 9880.356341] wlp2s0: associated
>[ 9880.356394] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 9951.329794] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9951.329807] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9951.333647] wlp2s0: authenticated
>[ 9951.334712] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9951.345479] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=1297)
>[ 9951.345497] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 9952.424699] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 9952.536699] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 9952.648610] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[ 9956.979392] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9956.979408] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9956.997598] wlp2s0: authenticated
>[ 9956.998309] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9957.009493] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=25)
>[ 9957.112489] wlp2s0: associated
>[ 9957.112580] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[ 9980.893949] usb 2-1: USB disconnect, device number 10
>[ 9991.581872] rtw89_8852be 0000:02:00.0: timed out to flush queues
>[ 9995.871908] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[ 9995.871923] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9995.875551] wlp2s0: authenticated
>[ 9995.876920] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[ 9995.890342] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[ 9995.890358] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[ 9996.968818] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[ 9997.080998] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[ 9997.192803] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[10001.517531] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[10001.517538] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[10001.530407] wlp2s0: authenticated
>[10001.531422] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[10001.543095] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=25)
>[10001.648585] wlp2s0: associated
>[10001.648658] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[10032.901563] usb 1-6: USB disconnect, device number 14
>[10033.280976] usb 1-8: USB disconnect, device number 15
>[10033.955609] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 0: transmit queue 0 timed out 5002 ms
>[10033.955648] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[10033.968035] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[10039.909893] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[10039.909905] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[10039.918219] wlp2s0: authenticated
>[10039.918798] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[10039.934995] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=30 aid=0)
>[10039.935011] wlp2s0: 7c:f1:7e:b3:1d:31 rejected association temporarily; comeback duration 1000 TU (1024 ms)
>[10040.598710] usb 1-9.2: new low-speed USB device number 16 using xhci_hcd
>[10040.686414] usb 1-9.2: New USB device found, idVendor=0458, idProduct=003a, bcdDevice= 1.00
>[10040.686423] usb 1-9.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[10040.686426] usb 1-9.2: Product: Optical Mouse
>[10040.686428] usb 1-9.2: Manufacturer: Genius
>[10040.693415] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.2/1-9.2:1.0/0003:0458:003A.000A/input/input26
>[10040.693814] hid-generic 0003:0458:003A.000A: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-9.2/input0
>[10040.996799] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 2/3)
>[10041.108712] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 3/3)
>[10041.220716] wlp2s0: association with 7c:f1:7e:b3:1d:31 timed out
>[10044.472183] usb 1-9.3: new low-speed USB device number 17 using xhci_hcd
>[10044.564666] usb 1-9.3: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
>[10044.564676] usb 1-9.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>[10044.564680] usb 1-9.3: Product: USB Keyboard
>[10044.564683] usb 1-9.3: Manufacturer: Logitech
>[10044.574727] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.0/0003:046D:C31C.000B/input/input27
>[10044.661282] hid-generic 0003:046D:C31C.000B: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:14.0-9.3/input0
>[10044.667531] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.000C/input/input28
>[10044.719378] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-9/1-9.3/1-9.3:1.1/0003:046D:C31C.000C/input/input29
>[10044.719636] hid-generic 0003:046D:C31C.000C: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:14.0-9.3/input1
>[10045.504139] wlp2s0: authenticate with 7c:f1:7e:b3:1d:31 (local address=5c:8a:ae:c5:f1:b6)
>[10045.504155] wlp2s0: send auth to 7c:f1:7e:b3:1d:31 (try 1/3)
>[10045.514351] wlp2s0: authenticated
>[10045.515037] wlp2s0: associate with 7c:f1:7e:b3:1d:31 (try 1/3)
>[10045.524070] wlp2s0: RX AssocResp from 7c:f1:7e:b3:1d:31 (capab=0x511 status=0 aid=25)
>[10045.628254] wlp2s0: associated
>[10045.695205] wlp2s0: Limiting TX power to 20 (23 - 3) dBm as advertised by 7c:f1:7e:b3:1d:31
>[10055.076796] usb 1-6: new high-speed USB device number 18 using xhci_hcd
>[10055.203688] usb 1-6: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[10055.203695] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[10055.203706] usb 1-6: Product: Ugreen Storage Device
>[10055.203708] usb 1-6: Manufacturer: Ugreen
>[10055.203710] usb 1-6: SerialNumber: 240417850887
>[10055.208560] scsi host8: uas
>[10056.077875] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[10056.183826] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[10056.184285] sd 8:0:0:0: [sda] Write Protect is off
>[10056.184290] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[10056.184967] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[10056.185119] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[10056.185120] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[10056.204854]  sda: sda1
>[10056.204959] sd 8:0:0:0: [sda] Attached SCSI disk
>[10107.154143] bash (18476): drop_caches: 3
>[10199.577042] usb 1-6: USB disconnect, device number 18
>[10202.997113] usb 1-8: new high-speed USB device number 19 using xhci_hcd
>[10203.123788] usb 1-8: New USB device found, idVendor=174c, idProduct=2463, bcdDevice= 1.00
>[10203.123800] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=1
>[10203.123804] usb 1-8: Product: Ugreen Storage Device
>[10203.123807] usb 1-8: Manufacturer: Ugreen
>[10203.123810] usb 1-8: SerialNumber: 240417850887
>[10203.128836] scsi host8: uas
>[10203.997982] scsi 8:0:0:0: Direct-Access     ASMT     2462 NVME        0    PQ: 0 ANSI: 6
>[10204.104855] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
>[10204.105289] sd 8:0:0:0: [sda] Write Protect is off
>[10204.105293] sd 8:0:0:0: [sda] Mode Sense: 43 00 00 00
>[10204.105803] sd 8:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>[10204.105983] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
>[10204.105987] sd 8:0:0:0: [sda] Optimal transfer size 2097152 bytes
>[10204.126975]  sda: sda1
>[10204.127107] sd 8:0:0:0: [sda] Attached SCSI disk
>[10205.114488] bash (18476): drop_caches: 3
>[10361.063726] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 6: transmit queue 0 timed out 5008 ms
>[10361.063829] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[10361.076305] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).
>[10407.876203] r8169 0000:03:00.0 enp3s0: NETDEV WATCHDOG: CPU: 6: transmit queue 0 timed out 5005 ms
>[10407.876259] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
>[10407.888573] r8169 0000:03:00.0 enp3s0: rtl_rxtx_empty_cond == 0 (loop: 42, delay: 100).

Actions: View

Attachments on bug 56567: 19902 | 19903