Attachment 2459 Details for Bug 14644 – dmesg

dmesg

dmesg (text/plain), 16.43 KB, created by Yurkovsky Andrey on 2008-02-29 00:15:57 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Yurkovsky Andrey

Created: 2008-02-29 00:15:57 MSK

Size: 16.43 KB

patch

obsolete

>Linux version 2.6.18-std-smp-alt12 (builder@apiary.armor.altlinux.org) (gcc version 4.1.1 20070105 (ALT Linux, build 4.1.1-alt12)) #1 SMP Mon Feb 11 00:44:54 MSK 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bfc0000 (usable)
> BIOS-e820: 000000001bfc0000 - 000000001bfce000 (ACPI data)
> BIOS-e820: 000000001bfce000 - 000000001bff0000 (ACPI NVS)
> BIOS-e820: 000000001bff0000 - 000000001c000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>found SMP MP-table at 000ff780
>On node 0 totalpages: 114624
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 110528 pages, LIFO batch:31
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f8d80
>ACPI: RSDT (v001 A M I  OEMRSDT  0x11000620 MSFT 0x00000097) @ 0x1bfc0000
>ACPI: FADT (v002 A M I  OEMFACP  0x11000620 MSFT 0x00000097) @ 0x1bfc0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x11000620 MSFT 0x00000097) @ 0x1bfc0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x11000620 MSFT 0x00000097) @ 0x1bfc0410
>ACPI: OEMB (v001 A M I  AMI_OEM  0x11000620 MSFT 0x00000097) @ 0x1bfce040
>ACPI: DSDT (v001  12345 12345123 0x00000123 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 7:6 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1c000000:e2c00000)
>Detected 1596.063 MHz processor.
>Built 1 zonelists.  Total pages: 114624
>Kernel command line: auto BOOT_IMAGE=ALTLinux ro root=UUID=692933ae-53f5-4119-9e5e-73987220f3a2 panic=30 splash=silent resume=/dev/sda2
>bootsplash: silent mode.
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fecc0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 450384k/458496k available (1591k kernel code, 7656k reserved, 638k data, 192k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3196.27 BogoMIPS (lpj=6392544)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
>CPU: After vendor identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: afebfbff 20100000 00000000 00000940 0000e31d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>checking if image is initramfs... it is
>Freeing initrd memory: 499k freed
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... /DSDT.aml does not exist.
>CPU0: Intel(R) Celeron(R) D CPU        420  @ 1.60GHz stepping 01
>Total of 1 processors activated (3196.27 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>migration_cost=0
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:09: ioport range 0xa00-0xa0f has been reserved
>pnp: 00:09: ioport range 0xa10-0xa1f has been reserved
>pnp: 00:09: ioport range 0xa20-0xa2f has been reserved
>pnp: 00:09: ioport range 0xa30-0xa3f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fca00000-feafffff
>  PREFETCH window: d7f00000-dfefffff
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1204235668.484:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie02]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie02]
>vesafb: framebuffer at 0xd8000000, mapped to 0xdc880000, using 3750k, total 65536k
>vesafb: mode is 800x600x16, linelength=1600, pages=63
>vesafb: protected mode interface info at c000:6d32
>vesafb: pmi: set display start = c00c6d80, set palette = c00c6df1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 57947 bytes,<6>...found (800x600, 12886 bytes, v3).
>Console: switching to colour frame buffer device 97x34
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 192k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 209
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: Optiarc DVD RW AD-5200A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 209
>sata_via 0000:00:0f.0: routed to hard irq line 5
>ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE000 irq 209
>ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE082 bmdma 0xE008 irq 209
>scsi0 : sata_via
>ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xE807
>scsi1 : sata_via
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7, max UDMA7, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>  Vendor: ATA       Model: SAMSUNG HD080HJ   Rev: ZH10
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4
>sd 1:0:0:0: Attached scsi disk sda
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Linux agpgart interface v0.102 (c) Dave Jones
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 217
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 217, io base 0x0000dc00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>input: PC Speaker as /class/input/input1
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 974kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 217
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 217, io base 0x0000d480
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 217
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 217, io base 0x0000d400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 217
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 217, io base 0x0000d080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 225
>eth0: VIA Rhine II at 0x1ee00, 00:16:ec:fa:c6:84, IRQ 225.
>eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 217
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 217, io mem 0xfebbfc00
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>agpgart: Detected VIA P4M890 chipset
>agpgart: AGP aperture is 128M @ 0xf0000000
>Floppy drive(s): fd0 is 1.44M
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>FDC 0 is a post-1991 82077
>ts: Compaq touchscreen protocol output
>ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 16 (level, low) -> IRQ 233
>Vortex: init.... <6>usb 2-1: new full speed USB device using uhci_hcd and address 2
>done.
>gameport: AU88x0 Gameport is pci0000:00:08.0/gameport0, speed 1355kHz
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
>usbcore: registered new driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>NET: Registered protocol family 23
>usbcore: registered new driver mcs7780
>Adding 2048276k swap on /dev/sda2.  Priority:-1 extents:1 across:2048276k
>EXT3 FS on sda1, internal journal
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>it87: Found IT8712F chip at 0xa10, revision 8
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Processor [CPU1] (supports 16 throttling states)
>ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0678): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Thermal Zone [THRM] (30 C)
>IrCOMM protocol (Dag Brattli)
>[drm] Initialized drm 1.1.0 20060810
>PCI: Unable to reserve mem region #1:4000000@d8000000 for device 0000:01:00.0
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 233
>[drm] Initialized via 2.11.1 20070202 on minor 0
>[drm] Used old pci detect: framebuffer loaded
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=225576kB.
>vortex: IRQ fifo error
>vortex: IRQ fifo error
>CSLIP: code copyright 1989 Regents of the University of California
>PPP generic driver version 2.4.2
>PPP BSD Compression module registered
>PPP Deflate Compression module registered

Actions: View

Attachments on bug 14644: 2459