Attachment 2805 Details for Bug 16808 – dmesg

dmesg

dmesg (text/plain), 29.71 KB, created by Evgeny on 2008-08-21 22:13:11 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Evgeny

Created: 2008-08-21 22:13:11 MSD

Size: 29.71 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.25-std-pae-alt7 (builder@apiary.armor.altlinux.org) (gcc version 4.1.2 20070626 (ALT Linux, build 4.1.2-alt3)) #1 SMP Tue Jul 15 19:15:42 MSD 2008
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
> BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
> BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
> BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
> BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>3968MB HIGHMEM available.
>896MB LOWMEM available.
>Scan SMP from c0000000 for 1024 bytes.
>Scan SMP from c009fc00 for 1024 bytes.
>Scan SMP from c00f0000 for 65536 bytes.
>found SMP MP-table at [c00ff780] 000ff780
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 1245184) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1245184
>Movable zone start PFN for each node
>early_node_map[1] active PFN ranges
>    0:        0 ->  1245184
>On node 0 totalpages: 1245184
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 7936 pages used for memmap
>  HighMem zone: 1007872 pages, LIFO batch:31
>  Movable zone: 0 pages used for memmap
>DMI present.
>ACPI: RSDP 000FB030, 0014 (r0 ACPIAM)
>ACPI: RSDT CFF70000, 0040 (r1 A_M_I_ OEMRSDT   7000810 MSFT       97)
>ACPI: FACP CFF70200, 0084 (r2 A_M_I_ OEMFACP   7000810 MSFT       97)
>ACPI: DSDT CFF70440, 9647 (r1  A0993 A0993001        1 INTL 20060113)
>ACPI: FACS CFF7E000, 0040
>ACPI: APIC CFF70390, 006C (r1 A_M_I_ OEMAPIC   7000810 MSFT       97)
>ACPI: MCFG CFF70400, 003C (r1 A_M_I_ OEMMCFG   7000810 MSFT       97)
>ACPI: OEMB CFF7E040, 0081 (r1 A_M_I_ AMI_OEM   7000810 MSFT       97)
>ACPI: HPET CFF79A90, 0038 (r1 A_M_I_ OEMHPET   7000810 MSFT       97)
>ACPI: OSFR CFF79AD0, 00B0 (r1 A_M_I_ OEMOSFR   7000810 MSFT       97)
>ACPI: SSDT CFF7EA20, 0A7C (r1 DpgPmm    CpuPm       12 INTL 20060113)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a301 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000)
>PM: Registered nosave memory: 000000000009c000 - 000000000009d000
>PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
>PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
>Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1235456
>Kernel command line: BOOT_IMAGE=ALTLinux ro root=UUID=13809c1b-a96f-48c3-b167-ecb42ea8239c resume=/dev/sda5 panic=30 splash=silent
>bootsplash: silent mode.
>mapped APIC to ffffb000 (fee00000)
>mapped IOAPIC to ffffa000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2337.712 MHz processor.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 4148076k/4980736k available (2313k kernel code, 44520k reserved, 805k data, 400k init, 3276224k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffe13000 - 0xfffff000   (1968 kB)
>    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff9fe000   ( 113 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0513000 - 0xc0577000   ( 400 kB)
>      .data : 0xc044253e - 0xc050bba0   ( 805 kB)
>      .text : 0xc0200000 - 0xc044253e   (2313 kB)
>Checking if this processor honours the WP bit even in supervisor mode...Ok.
>CPA: page pool initialized 1 of 1 pages preallocated
>hpet clockevent registered
>Calibrating delay using timer specific routine.. 4678.84 BogoMIPS (lpj=9357685)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>using mwait in idle threads.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Booting processor 1/1 ip 4000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4660.58 BogoMIPS (lpj=9321174)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz stepping 0b
>Total of 2 processors activated (9339.42 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1792 bytes
>CPU0 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000001 00000002
>CPU1 attaching sched-domain:
> domain 0: span 00000003
>  groups: 00000002 00000001
>net_namespace: 548 bytes
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>EISA bus registered
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  BF, should be B6 [20070126]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 17 devices
>ACPI: ACPI bus type pnp unregistered
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>hpet0: 4 64-bit timers, 14318180 Hz
>ACPI: RTC can wake from S4
>system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
>system 00:07: ioport range 0x290-0x29f has been reserved
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x87f has been reserved
>system 00:08: ioport range 0x500-0x57f has been reserved
>system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
>system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
>system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
>system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
>system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
>system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:10: iomem range 0x0-0x9ffff could not be reserved
>system 00:10: iomem range 0xc0000-0xcffff could not be reserved
>system 00:10: iomem range 0xe0000-0xfffff could not be reserved
>system 00:10: iomem range 0x100000-0xcfffffff could not be reserved
>system 00:10: iomem range 0x0-0x0 could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: 0xfa000000-0xfe8fffff
>  PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: 0x00000000f8f00000-0x00000000f8ffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: e000-efff
>  MEM window: 0xfea00000-0xfeafffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: 0xfe900000-0xfe9fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: 0xfeb00000-0xfebfffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 501k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1219353742.388:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:01:00.0: Boot video device
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>vesafb: framebuffer at 0xfb000000, mapped to 0xf8880000, using 3750k, total 14336k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: protected mode interface info at c000:b380
>vesafb: pmi: set display start = c00cb3e3, set palette = c00cb43e
>vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>hpet_resources: 0xfed00000 is busy
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>EISA: Probing bus 0 at eisa.0
>cpuidle: using governor ladder
>cpuidle: using governor menu
>TCP bic registered
>NET: Registered protocol family 1
>Using IPI No-Shortcut mode
>registered taskstats version 1
>Freeing unused kernel memory: 400k freed
>Write protecting the kernel read-only data: 612k
>Executing init=/init
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
>SCSI subsystem initialized
>Driver 'sd' needs updating - please use bus_type methods
>No dock devices found.
>libata version 3.00 loaded.
>ahci 0000:00:1f.2: version 3.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part 
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>scsi0 : ahci
>scsi1 : ahci
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>scsi5 : ahci
>ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 219
>ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 219
>ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 219
>ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 219
>ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 219
>ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 219
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD2500JS-58NCB1, 10.02E02, max UDMA/133
>ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
>ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>ata3: SATA link down (SStatus 0 SControl 300)
>ata4: SATA link down (SStatus 0 SControl 300)
>ata5: SATA link down (SStatus 0 SControl 300)
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-58N 10.0 PQ: 0 ANSI: 5
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
>sd 0:0:0:0: [sda] Write Protect is off
>sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda4 < sda5 sda6 >
>sd 0:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
>sd 1:0:0:0: [sdb] Write Protect is off
>sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>sd 1:0:0:0: [sdb] Attached SCSI disk
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:03:00.0: controller can't do NCQ, turning off CAP_NCQ
>ahci 0000:03:00.0: MV_AHCI HACK: port_map 7 -> 3
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 3 ports 3 Gbps 0x3 impl IDE mode
>ahci 0000:03:00.0: flags: 64bit stag led pmp slum part 
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi6 : ahci
>scsi7 : ahci
>scsi8 : ahci
>ata7: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd00 irq 16
>ata8: SATA max UDMA/133 abar m1024@0xfeaffc00 port 0xfeaffd80 irq 16
>ata9: DUMMY
>ata7: SATA link down (SStatus 0 SControl 300)
>ata8: SATA link down (SStatus 0 SControl 300)
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.9)
>input: PC Speaker as /devices/platform/pcspkr/input/input2
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>Real Time Clock Driver v1.12ac
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>Linux agpgart interface v0.103
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb1: SerialNumber: 0000:00:1a.0
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
>ACPI: SSDT CFF7E0D0, 01F3 (r1 DpgPmm  P001Ist       11 INTL 20060113)
>ACPI: SSDT CFF7E4D0, 04B2 (r1  PmRef  P001Cst     3001 INTL 20060113)
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:00 is registered as cooling_device0
>ACPI: SSDT CFF7E2D0, 01F3 (r1 DpgPmm  P002Ist       12 INTL 20060113)
>ACPI: SSDT CFF7E990, 0085 (r1  PmRef  P002Cst     3000 INTL 20060113)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: ACPI0007:01 is registered as cooling_device1
>ACPI: Power Button (CM) [PWRB]
>usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb2: SerialNumber: 0000:00:1a.1
>ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.2 to 64
>uhci_hcd 0000:00:1a.2: UHCI Host Controller
>uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb3: SerialNumber: 0000:00:1a.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Marking TSC unstable due to: TSC halts in idle.
>usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb4: Product: UHCI Host Controller
>usb usb4: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb4: SerialNumber: 0000:00:1d.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Linux video capture interface: v2.00
>usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb5: Product: UHCI Host Controller
>usb usb5: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb5: SerialNumber: 0000:00:1d.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 2 ports detected
>usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb6: Product: UHCI Host Controller
>usb usb6: Manufacturer: Linux 2.6.25-std-pae-alt7 uhci_hcd
>usb usb6: SerialNumber: 0000:00:1d.2
>ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1a.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febfe000-febfe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>saa7130/34: v4l2 driver version 0.2.14 loaded
>usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb7: Product: EHCI Host Controller
>usb usb7: Manufacturer: Linux 2.6.25-std-pae-alt7 ehci_hcd
>usb usb7: SerialNumber: 0000:00:1a.7
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb8: configuration #1 chosen from 1 choice
>hub 8-0:1.0: USB hub found
>hub 8-0:1.0: 6 ports detected
>usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
>usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb8: Product: EHCI Host Controller
>usb usb8: Manufacturer: Linux 2.6.25-std-pae-alt7 ehci_hcd
>usb usb8: SerialNumber: 0000:00:1d.7
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 17 (level, low) -> IRQ 17
>saa7133[0]: setting pci latency timer to 60
>saa7133[0]: found at 0000:05:01.0, rev: 240, irq: 17, latency: 60, mmio: 0xfebff800
>saa7133[0]: subsystem: 0000:5071, board: Beholder BeholdTV 507 FM/RDS / BeholdTV 509 FM [card=127,insmod option]
>saa7133[0]: board init: gpio is 200000
>input: saa7134 IR (Beholder BeholdTV 5 as /devices/pci0000:00/0000:00:1e.0/0000:05:01.0/input/input5
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>saa7133[0]: i2c eeprom 00: 00 00 71 50 54 20 00 00 00 00 00 00 00 00 00 01
>saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c eeprom f0: 42 54 56 30 33 30 30 ff ff ff ff ff ff ff ff ff
>saa7133[0]: i2c scan: found device @ 0x20  [???]
>saa7133[0]: i2c scan: found device @ 0x86  [tda9887]
>saa7133[0]: i2c scan: found device @ 0xa0  [eeprom]
>saa7133[0]: i2c scan: found device @ 0xc0  [tuner (analog)]
>usb 4-2: device not accepting address 2, error -71
>TEA5761 detected.
>tuner' 1-0010: chip found @ 0x20 (saa7133[0])
>TEA5761 detected.
>tea5761 1-0010: type set to Philips TEA5761HN FM Radio
>hub 4-0:1.0: unable to enumerate USB device on port 2
>tuner' 1-0043: chip found @ 0x86 (saa7133[0])
>tda9887 1-0043: creating new instance
>tda9887 1-0043: tda988[5/6/7] found
>All bytes are equal. It is not a TEA5767
>tuner' 1-0060: chip found @ 0xc0 (saa7133[0])
>tuner-simple 1-0060: creating new instance
>tuner-simple 1-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
>saa7133[0]: registered device video0 [v4l2]
>saa7133[0]: registered device vbi0
>saa7133[0]: registered device radio0
>saa7134 ALSA driver for DMA sound loaded
>saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 17 registered as card 1
>usb 8-2: new high speed USB device using ehci_hcd and address 2
>Adding 4192924k swap on /dev/sda5.  Priority:-1 extents:1 across:4192924k
>usb 8-2: configuration #1 chosen from 1 choice
>usb 8-2: New USB device found, idVendor=04a9, idProduct=221c
>usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>usb 8-2: Product: CanoScan
>usb 8-2: Manufacturer: Canon
>hub 8-0:1.0: unable to enumerate USB device on port 5
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c000154939a]
>EXT3 FS on sda1, internal journal
>usb 6-1: new low speed USB device using uhci_hcd and address 2
>usb 6-1: configuration #1 chosen from 1 choice
>usb 6-1: New USB device found, idVendor=04fc, idProduct=0005
>usb 6-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
>usb 6-1: Product: USB OpticalWheel Mouse
>usbcore: registered new interface driver hiddev
>input: USB OpticalWheel Mouse as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/input/input6
>input,hidraw0: USB HID v1.10 Mouse [USB OpticalWheel Mouse] on usb-0000:00:1d.2-1
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>vboxdrv: Trying to deactivate the NMI watchdog permanently...
>vboxdrv: Successfully done.
>vboxdrv: Found 2 processor cores.
>vboxdrv: fAsync=0 u64DiffCores=3591.
>vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
>vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000).
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.12  Thu Jul 17 18:11:36 PDT 2008
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.9
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: BNEP (Ethernet Emulation) ver 1.2
>Bluetooth: BNEP filters: protocol multicast
>Bridge firewalling registered
>pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8

Actions: View

Attachments on bug 16808: 2803 | 2804 | 2805 | 2806 | 2902 | 2999 | 3000 | 3001 | 3002