Attachment 3050 Details for Bug 17797 – dmesg для 64 бит

dmesg для 64 бит

dmesg-64 (text/plain), 31.53 KB, created by Alexei Takaseev on 2008-11-09 06:15:33 MSK

(hide)

Description:

Filename:

MIME Type:

Creator: Alexei Takaseev

Created: 2008-11-09 06:15:33 MSK

Size: 31.53 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.27-std-def-alt1 (builder@apiary.egro.altlinux.org) (gcc version 4.3.2 20081007 (ALT Linux 4.3.2-alt4) (GCC) ) #1 SMP Wed Nov 5 11:47:02 UTC 2008
>Command line: auto BOOT_IMAGE=ALTLinux root=821 resume=/dev/sda2 panic=30 splash=silent
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
> BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
> BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>last_pfn = 0x7ffd0 max_arch_pfn = 0x3ffffffff
>x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
>mtrr: your BIOS has set up an incorrect mask, fixing it up.
>init_memory_mapping
> 0000000000 - 007fe00000 page 2M
> 007fe00000 - 007ffd0000 page 4k
>kernel direct mapping tables up to 7ffd0000 @ 8000-c000
>last_map_addr: 7ffd0000 end: 7ffd0000
>RAMDISK: 00e4a000 - 00eff78b
>DMI present.
>ACPI: RSDP 000F9480, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFD0000, 0034 (r1 A M I  OEMRSDT  10000620 MSFT       97)
>ACPI: FACP 7FFD0200, 0084 (r2 A M I  OEMFACP  10000620 MSFT       97)
>ACPI: DSDT 7FFD0440, 50F7 (r1  1ADGH 1ADGH000        0 INTL  2002026)
>ACPI: FACS 7FFDE000, 0040
>ACPI: APIC 7FFD0390, 0070 (r1 A M I  OEMAPIC  10000620 MSFT       97)
>ACPI: MCFG 7FFD0400, 003C (r1 A M I  OEMMCFG  10000620 MSFT       97)
>ACPI: OEMB 7FFDE040, 005B (r1 A M I  AMI_OEM  10000620 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffd0000
>Bootmem setup node 0 0000000000000000-000000007ffd0000
>  NODE_DATA [0000000000001000 - 0000000000005fff]
>  bootmap [000000000000a000 -  0000000000019fff] pages 10
>(6 early reservations) ==> bootmem [0000000000 - 007ffd0000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0000200000 - 0000815cec]    TEXT DATA BSS ==> [0000200000 - 0000815cec]
>  #3 [0000e4a000 - 0000eff78b]          RAMDISK ==> [0000e4a000 - 0000eff78b]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0000008000 - 000000a000]          PGTABLE ==> [0000008000 - 000000a000]
>found SMP MP-table at [ffff8800000ff780] 000ff780
> [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
>Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x0000009f
>    0: 0x00000100 -> 0x0007ffd0
>On node 0 totalpages: 524143
>  DMA zone: 2102 pages, LIFO batch:0
>  DMA32 zone: 513032 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Detected use of extended apic ids on hypertransport bus
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
>PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>PERCPU: Allocating 52256 bytes of per cpu data
>NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 515134
>Policy zone: DMA32
>Kernel command line: auto BOOT_IMAGE=ALTLinux root=821 resume=/dev/sda2 panic=30 splash=silent
>bootsplash: silent mode.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>TSC: PIT calibration confirmed by PMTIMER.
>TSC: using PIT calibration value
>Detected 2211.306 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour dummy device 80x25
>console [tty0] enabled
>Checking aperture...
>No AGP bridge found
>Node 0: aperture @ 76c000000 size 32 MB
>Aperture beyond 4GB. Ignoring.
>Memory: 2060664k/2096960k available (2962k kernel code, 35908k reserved, 1595k data, 488k init)
>CPA: page pool initialized 1 of 1 pages preallocated
>Calibrating delay loop (skipped), value calculated using timer frequency.. 4422.61 BogoMIPS (lpj=8845224)
>Security Framework initialized
>SELinux:  Disabled at boot.
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys devices
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>tseg: 0000000000
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>using C1E aware idle routine
>ACPI: Core revision 20080609
>..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Using local APIC timer interrupts.
>APIC timer calibration result 12564240
>Detected 12.564 MHz APIC timer.
>Booting processor 1/1 ip 6000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4422.63 BogoMIPS (lpj=8845261)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Brought up 2 CPUs
>Total of 2 processors activated (8845.24 BogoMIPS).
>CPU0 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 0 1
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>CPU1 attaching sched-domain:
> domain 0: span 0-1 level CPU
>  groups: 1 0
>  domain 1: span 0-1 level NODE
>   groups: 0-1
>net_namespace: 1552 bytes
>NET: Registered protocol family 16
>node 0 link 0: io port [1000, ffffff]
>node 0 link 0: io port [2000, 3fff]
>TOM: 0000000080000000 aka 2048M
>node 0 link 0: mmio [e0000000, efffffff]
>node 0 link 0: mmio [a0000, bffff]
>node 0 link 0: mmio [80000000, fe0bffff]
>bus: [00,ff] on node 0 link 0
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [80000000, fcffffffff]
>bus: 00 index 2 mmio: [a0000, bffff]
>ACPI: bus type pci registered
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1 for base access
>ACPI: EC: Look up EC in DSDT
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
>PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>HPET not enabled in BIOS. You might try hpet=force boot option
>PCI: 0000:00:01.1 reg 20 io port: [2d00, 2d3f]
>PCI: 0000:00:01.1 reg 24 io port: [2e00, 2e3f]
>pci 0000:00:01.1: PME# supported from D3hot D3cold
>pci 0000:00:01.1: PME# disabled
>PCI: 0000:00:02.0 reg 10 32bit mmio: [fbefb000, fbefbfff]
>pci 0000:00:02.0: supports D1
>pci 0000:00:02.0: supports D2
>pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.0: PME# disabled
>PCI: 0000:00:02.1 reg 10 32bit mmio: [fbefac00, fbefacff]
>pci 0000:00:02.1: supports D1
>pci 0000:00:02.1: supports D2
>pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:02.1: PME# disabled
>PCI: 0000:00:04.0 reg 20 io port: [ffa0, ffaf]
>PCI: 0000:00:05.0 reg 10 io port: [d800, d807]
>PCI: 0000:00:05.0 reg 14 io port: [d480, d483]
>PCI: 0000:00:05.0 reg 18 io port: [d400, d407]
>PCI: 0000:00:05.0 reg 1c io port: [d080, d083]
>PCI: 0000:00:05.0 reg 20 io port: [d000, d00f]
>PCI: 0000:00:05.0 reg 24 32bit mmio: [fbef9000, fbef9fff]
>PCI: 0000:00:05.1 reg 10 io port: [cc00, cc07]
>PCI: 0000:00:05.1 reg 14 io port: [c880, c883]
>PCI: 0000:00:05.1 reg 18 io port: [c800, c807]
>PCI: 0000:00:05.1 reg 1c io port: [c480, c483]
>PCI: 0000:00:05.1 reg 20 io port: [c400, c40f]
>PCI: 0000:00:05.1 reg 24 32bit mmio: [fbef8000, fbef8fff]
>PCI: 0000:00:06.1 reg 10 32bit mmio: [fbef4000, fbef7fff]
>pci 0000:00:06.1: PME# supported from D3hot D3cold
>pci 0000:00:06.1: PME# disabled
>PCI: 0000:00:08.0 reg 10 32bit mmio: [fbef3000, fbef3fff]
>PCI: 0000:00:08.0 reg 14 io port: [c080, c087]
>PCI: 0000:00:08.0 reg 18 32bit mmio: [fbefa800, fbefa8ff]
>PCI: 0000:00:08.0 reg 1c 32bit mmio: [fbefa400, fbefa40f]
>pci 0000:00:08.0: supports D1
>pci 0000:00:08.0: supports D2
>pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:08.0: PME# disabled
>pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0b.0: PME# disabled
>pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0c.0: PME# disabled
>pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0d.0: PME# disabled
>pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0e.0: PME# disabled
>pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
>pci 0000:00:0f.0: PME# disabled
>PCI: 0000:01:00.0 reg 10 32bit mmio: [cffff000, cfffffff]
>PCI: 0000:01:00.1 reg 10 32bit mmio: [cfffe000, cfffefff]
>PCI: 0000:01:01.0 reg 10 32bit mmio: [fbff0000, fbffffff]
>pci 0000:00:06.0: transparent bridge
>PCI: bridge 0000:00:06.0 32bit mmio: [fbf00000, fbffffff]
>PCI: bridge 0000:00:06.0 32bit mmio pref: [cff00000, cfffffff]
>PCI: 0000:06:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
>PCI: 0000:06:00.0 reg 14 32bit mmio: [d0000000, dfffffff]
>PCI: 0000:06:00.0 reg 1c 64bit mmio: [fc000000, fcffffff]
>PCI: 0000:06:00.0 reg 24 io port: [ec00, ec7f]
>PCI: 0000:06:00.0 reg 30 32bit mmio: [febe0000, febfffff]
>Pre-1.1 PCIe device detected, disable ASPM for 0000:00:0f.0. It can be enabled forcedly with 'pcie_aspm=force'
>PCI: bridge 0000:00:0f.0 io port: [e000, efff]
>PCI: bridge 0000:00:0f.0 32bit mmio: [fc000000, febfffff]
>PCI: bridge 0000:00:0f.0 64bit mmio pref: [d0000000, dfffffff]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
>ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 73, should be 68 [20080609]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 15 devices
>ACPI: ACPI bus type pnp unregistered
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>DMAR:parse DMAR table failure.
>ACPI: RTC can wake from S4
>system 00:08: ioport range 0x4d0-0x4d1 has been reserved
>system 00:08: ioport range 0x800-0x80f has been reserved
>system 00:08: ioport range 0x2000-0x207f has been reserved
>system 00:08: ioport range 0x2080-0x20ff has been reserved
>system 00:08: ioport range 0x2400-0x247f has been reserved
>system 00:08: ioport range 0x2480-0x24ff has been reserved
>system 00:08: ioport range 0x2800-0x287f has been reserved
>system 00:08: ioport range 0x2880-0x28ff has been reserved
>system 00:08: ioport range 0x2c00-0x2c7f has been reserved
>system 00:08: ioport range 0x2c80-0x2cff has been reserved
>system 00:08: iomem range 0xfbe80000-0xfbebffff has been reserved
>system 00:08: iomem range 0xfee01000-0xfeefffff could not be reserved
>system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
>system 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
>system 00:0c: ioport range 0xa00-0xa0f has been reserved
>system 00:0c: ioport range 0xa10-0xa1f has been reserved
>system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
>system 00:0e: iomem range 0x0-0x9ffff could not be reserved
>system 00:0e: iomem range 0xc0000-0xcffff has been reserved
>system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
>system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
>pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
>pci 0000:00:06.0:   IO window: disabled
>pci 0000:00:06.0:   MEM window: 0xfbf00000-0xfbffffff
>pci 0000:00:06.0:   PREFETCH window: 0x000000cff00000-0x000000cfffffff
>pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
>pci 0000:00:0b.0:   IO window: disabled
>pci 0000:00:0b.0:   MEM window: disabled
>pci 0000:00:0b.0:   PREFETCH window: disabled
>pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
>pci 0000:00:0c.0:   IO window: disabled
>pci 0000:00:0c.0:   MEM window: disabled
>pci 0000:00:0c.0:   PREFETCH window: disabled
>pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
>pci 0000:00:0d.0:   IO window: disabled
>pci 0000:00:0d.0:   MEM window: disabled
>pci 0000:00:0d.0:   PREFETCH window: disabled
>pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
>pci 0000:00:0e.0:   IO window: disabled
>pci 0000:00:0e.0:   MEM window: disabled
>pci 0000:00:0e.0:   PREFETCH window: disabled
>pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06
>pci 0000:00:0f.0:   IO window: 0xe000-0xefff
>pci 0000:00:0f.0:   MEM window: 0xfc000000-0xfebfffff
>pci 0000:00:0f.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
>pci 0000:00:06.0: setting latency timer to 64
>pci 0000:00:0b.0: setting latency timer to 64
>pci 0000:00:0c.0: setting latency timer to 64
>pci 0000:00:0d.0: setting latency timer to 64
>pci 0000:00:0e.0: setting latency timer to 64
>pci 0000:00:0f.0: setting latency timer to 64
>bus: 00 index 0 io port: [0, ffff]
>bus: 00 index 1 mmio: [0, ffffffffffffffff]
>bus: 01 index 0 mmio: [0, 0]
>bus: 01 index 1 mmio: [fbf00000, fbffffff]
>bus: 01 index 2 mmio: [cff00000, cfffffff]
>bus: 01 index 3 io port: [0, ffff]
>bus: 01 index 4 mmio: [0, ffffffffffffffff]
>bus: 02 index 0 mmio: [0, 0]
>bus: 02 index 1 mmio: [0, 0]
>bus: 02 index 2 mmio: [0, 0]
>bus: 02 index 3 mmio: [0, 0]
>bus: 03 index 0 mmio: [0, 0]
>bus: 03 index 1 mmio: [0, 0]
>bus: 03 index 2 mmio: [0, 0]
>bus: 03 index 3 mmio: [0, 0]
>bus: 04 index 0 mmio: [0, 0]
>bus: 04 index 1 mmio: [0, 0]
>bus: 04 index 2 mmio: [0, 0]
>bus: 04 index 3 mmio: [0, 0]
>bus: 05 index 0 mmio: [0, 0]
>bus: 05 index 1 mmio: [0, 0]
>bus: 05 index 2 mmio: [0, 0]
>bus: 05 index 3 mmio: [0, 0]
>bus: 06 index 0 io port: [e000, efff]
>bus: 06 index 1 mmio: [fc000000, febfffff]
>bus: 06 index 2 mmio: [d0000000, dfffffff]
>bus: 06 index 3 mmio: [0, 0]
>NET: Registered protocol family 2
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>checking if image is initramfs... it is
>Freeing initrd memory: 725k freed
>audit: initializing netlink socket (disabled)
>type=2000 audit(1226187708.336:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 4026
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci 0000:00:05.0: Enabling HT MSI Mapping
>pci 0000:00:05.1: Enabling HT MSI Mapping
>pci 0000:00:06.0: Enabling HT MSI Mapping
>pci 0000:00:06.1: Enabling HT MSI Mapping
>pci 0000:00:08.0: Enabling HT MSI Mapping
>pci 0000:00:0b.0: Enabling HT MSI Mapping
>pci 0000:00:0c.0: Enabling HT MSI Mapping
>pci 0000:00:0d.0: Enabling HT MSI Mapping
>pci 0000:00:0e.0: Enabling HT MSI Mapping
>pci 0000:00:0f.0: Enabling HT MSI Mapping
>pci 0000:06:00.0: Boot video device
>pcieport-driver 0000:00:0b.0: setting latency timer to 64
>pcieport-driver 0000:00:0b.0: found MSI capability
>pci_express 0000:00:0b.0:pcie00: allocate port service
>pci_express 0000:00:0b.0:pcie03: allocate port service
>pcieport-driver 0000:00:0c.0: setting latency timer to 64
>pcieport-driver 0000:00:0c.0: found MSI capability
>pci_express 0000:00:0c.0:pcie00: allocate port service
>pci_express 0000:00:0c.0:pcie03: allocate port service
>pcieport-driver 0000:00:0d.0: setting latency timer to 64
>pcieport-driver 0000:00:0d.0: found MSI capability
>pci_express 0000:00:0d.0:pcie00: allocate port service
>pci_express 0000:00:0d.0:pcie03: allocate port service
>pcieport-driver 0000:00:0e.0: setting latency timer to 64
>pcieport-driver 0000:00:0e.0: found MSI capability
>pci_express 0000:00:0e.0:pcie00: allocate port service
>pci_express 0000:00:0e.0:pcie03: allocate port service
>pcieport-driver 0000:00:0f.0: setting latency timer to 64
>pcieport-driver 0000:00:0f.0: found MSI capability
>pci_express 0000:00:0f.0:pcie00: allocate port service
>pci_express 0000:00:0f.0:pcie03: allocate port service
>vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using 3750k, total 262144k
>vesafb: mode is 800x600x16, linelength=1600, pages=2
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 133202 bytes
>bootsplash: ...found (800x600, 12886 bytes, v3).
>Console: switching to colour frame buffer device 97x34
>fb0: VESA VGA frame buffer device
>Linux agpgart interface v0.103
>Serial: 8250/16550 driver4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>input: Macintosh mouse button emulation as /class/input/input0
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>cpuidle: using governor ladder
>cpuidle: using governor menu
>Driver for HIFN 795x crypto accelerator chip has been successfully registered.
>TCP bic registered
>registered taskstats version 1
>Freeing unused kernel memory: 488k freed
>Executing init=/init
>input: AT Translated Set 2 keyboard as /class/input/input1
>No dock devices found.
>SCSI subsystem initialized
>libata version 3.00 loaded.
>pata_amd 0000:00:04.0: version 0.3.10
>pata_amd 0000:00:04.0: setting latency timer to 64
>scsi0 : pata_amd
>scsi1 : pata_amd
>ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
>ata2: port disabled. ignoring.
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>pata_acpi 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>pata_acpi 0000:00:05.0: setting latency timer to 64
>pata_acpi 0000:00:05.0: PCI INT A disabled
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
>pata_acpi 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
>pata_acpi 0000:00:05.1: setting latency timer to 64
>pata_acpi 0000:00:05.1: PCI INT B disabled
>sata_nv 0000:00:05.0: version 3.5
>sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
>sata_nv 0000:00:05.0: Using SWNCQ mode
>sata_nv 0000:00:05.0: setting latency timer to 64
>scsi2 : sata_nv
>scsi3 : sata_nv
>ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd000 irq 23
>ata4: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xd008 irq 23
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: Hitachi HDT725040VLA360, V5COA52A, max UDMA/133
>ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata3.00: configured for UDMA/133
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
>ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata4.00: configured for UDMA/133
>isa bounce pool size: 16 pages
>scsi 2:0:0:0: Direct-Access     ATA      Hitachi HDT72504 V5CO PQ: 0 ANSI: 5
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
>sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
>sata_nv 0000:00:05.1: Using SWNCQ mode
>sata_nv 0000:00:05.1: setting latency timer to 64
>scsi4 : sata_nv
>scsi5 : sata_nv
>ata5: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 22
>ata6: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 22
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATA-6: ST3160827AS, 3.42, max UDMA/133
>ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATAPI: Optiarc DVD RW AD-7173S, 1-00, max UDMA/66
>ata6.00: configured for UDMA/66
>scsi 4:0:0:0: Direct-Access     ATA      ST3160827AS      3.42 PQ: 0 ANSI: 5
>scsi 5:0:0:0: CD-ROM            Optiarc  DVD RW AD-7173S  1-00 PQ: 0 ANSI: 5
>Driver 'sd' needs updating - please use bus_type methods
>sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 2:0:0:0: [sda] 781422768 512-byte hardware sectors (400088 MB)
>sd 2:0:0:0: [sda] Write Protect is off
>sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
>sd 2:0:0:0: [sda] Attached SCSI disk
>sd 3:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 3:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
>sd 3:0:0:0: [sdb] Write Protect is off
>sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
>sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 >
>sd 3:0:0:0: [sdb] Attached SCSI disk
>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 4:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
>sd 4:0:0:0: [sdc] Write Protect is off
>sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
>sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 >
>sd 4:0:0:0: [sdc] Attached SCSI disk
>PM: Starting manual resume from disk
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>input: Power Button (FF) as /class/input/input2
>ACPI: Power Button (FF) [PWRF]
>processor ACPI0007:00: registered as cooling_device0
>input: Power Button (CM) as /class/input/input3
>processor ACPI0007:01: registered as cooling_device1
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ACPI: Power Button (CM) [PWRB]
>i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
>ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:02.1: setting latency timer to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
>ehci_hcd 0000:00:02.1: irq 21, io mem 0xfbefac00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>sd 3:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>scsi 5:0:0:0: Attached scsi generic sg3 type 5
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Driver 'sr' needs updating - please use bus_type methods
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>ath_hal: module license 'Proprietary' taints kernel.
>ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
>ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
>ohci_hcd 0000:00:02.0: setting latency timer to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.0: irq 20, io mem 0xfbefb000
>input: PC Speaker as /class/input/input4
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>wlan: 0.9.4
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>NET: Registered protocol family 23
>ath_pci: 0.9.4
>Error: Driver 'pcspkr' is already registered, aborting...
>forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
>forcedeth 0000:00:08.0: setting latency timer to 64
>nv_probe: set workaround bit for reversed mac addr
>Linux video capture interface: v2.00
>usb 2-5: new full speed USB device using ohci_hcd and address 2
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>usb 2-5: configuration #1 chosen from 1 choice
>forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:ed:71:32
>forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
>HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
>HDA Intel 0000:00:06.1: setting latency timer to 64
>input: ImPS/2 Generic Wheel Mouse as /class/input/input5
>usbcore: registered new interface driver usbserial
>usbserial: USB Serial support registered for generic
>usbcore: registered new interface driver usbserial_generic
>usbserial: USB Serial Driver core
>usbserial: USB Serial support registered for GSM modem (1-port)
>option 2-5:1.0: GSM modem (1-port) converter detected
>usb 2-5: GSM modem (1-port) converter now attached to ttyUSB0
>option 2-5:1.1: GSM modem (1-port) converter detected
>usb 2-5: GSM modem (1-port) converter now attached to ttyUSB1
>usbcore: registered new interface driver option
>option: USB Driver for GSM modems: v0.7.2
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>HDA Intel 0000:00:06.1: PCI INT B disabled
>HDA Intel: probe of 0000:00:06.1 failed with error -22
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>ath_pci 0000:01:01.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
>ath_rate_sample: 1.2 (0.9.4)
>wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
>wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
>wifi0: H/W encryption support: WEP AES AES_CCM TKIP
>wifi0: mac 5.9 phy 4.3 radio 4.6
>wifi0: Use hw queue 1 for WME_AC_BE traffic
>wifi0: Use hw queue 0 for WME_AC_BK traffic
>wifi0: Use hw queue 2 for WME_AC_VI traffic
>wifi0: Use hw queue 3 for WME_AC_VO traffic
>wifi0: Use hw queue 8 for CAB traffic
>wifi0: Use hw queue 9 for beacons
>wifi0: Atheros 5212: mem=0xfbff0000, irq=19
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
>bttv 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
>bttv0: Bt878 (rev 17) at 0000:01:00.0, irq: 18, latency: 64, mmio: 0xcffff000
>bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
>bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00fefff3 [init]
>bttv0: Avermedia eeprom[0x4821]: tuner=5 radio:yes remote control:yes
>bttv0: tuner type=5
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tuner' 2-0061: chip found @ 0xc2 (bt878 #0 [sw])
>tuner-simple 2-0061: creating new instance
>tuner-simple 2-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>input: bttv IR (card=41) as /class/input/input6
>Bt87x 0000:01:00.1: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
>bt87x0: Using board 5, analog, digital (rate 48000 Hz)
>Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1 across:506036k
>Adding 522104k swap on /dev/sdc2.  Priority:-2 extents:1 across:522104k
>EXT3 FS on sdc1, internal journal
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
>SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sdc5
>Ending clean XFS mount for filesystem: sdc5
>XFS mounting filesystem sdc6
>Ending clean XFS mount for filesystem: sdc6
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>XFS mounting filesystem sda5
>Ending clean XFS mount for filesystem: sda5
>XFS mounting filesystem sda6
>Ending clean XFS mount for filesystem: sda6
>XFS mounting filesystem sda7
>Ending clean XFS mount for filesystem: sda7
>FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
>XFS mounting filesystem sdb5
>Ending clean XFS mount for filesystem: sdb5
>XFS mounting filesystem sdc3
>Ending clean XFS mount for filesystem: sdc3
>eth0: no link during initialization.
>bootsplash 3.1.6-2004/03/31: looking for picture...
>bootsplash: silentjpeg size 133202 bytes
>bootsplash: ...found (800x600, 12886 bytes, v3).
>bootsplash: status on console 1 changed to on
>NET: Registered protocol family 17

Actions: View

Attachments on bug 17797: 3037 | 3039 | 3047 | 3048 | 3049 | 3050 | 3051