Attachment 378 Details for Bug 3854 – dmesg from 2.2.22 kernel (after usb modules loaded and usbdevfs mounted)

dmesg from 2.2.22 kernel (after usb modules loaded and usbdevfs mounted)

dmesg.2.2.22 (text/plain), 4.91 KB, created by Yury Aliaev on 2004-04-05 14:02:53 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Yury Aliaev

Created: 2004-04-05 14:02:53 MSD

Size: 4.91 KB

patch

obsolete

>Linux version 2.2.22 (root@Digitalina) (gcc version 2.96 20000731 (ALT Linux, build 2.96-ipl15mdk)) #3 Sat Jan 4 17:04:45 MSK 2003
>BIOS-provided physical RAM map:
> BIOS-e820: 0009f000 @ 00000000 (usable)
> BIOS-e820: 07f00000 @ 00100000 (usable)
>Detected 524087 kHz processor.
>ide_setup: hdd=ide-scsi
>Console: colour VGA+ 80x60
>Calibrating delay loop... 1045.29 BogoMIPS
>Memory: 128040k/131072k available (904k kernel code, 408k reserved, 1644k data, 76k init, 0k bigmem)
>Dentry hash table entries: 16384 (order 5, 128k)
>Buffer cache hash table entries: 131072 (order 7, 512k)
>Page cache hash table entries: 32768 (order 5, 128k)
>Inode hash table entries: 16384 (128k), inode-max: 16384
>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
>CPU: AMD-K6(tm) 3D processor stepping 0c
>Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
>PCI: PCI BIOS revision 2.10 entry at 0xfb220, last bus=1
>PCI: Using configuration type 1
>PCI: Probing PCI hardware
>Linux NET4.0 for Linux 2.2
>Based upon Swansea University Computer Society NET3.039
>NET4: Unix domain sockets 1.0 for Linux NET4.0.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP
>TCP: Hash tables configured (ehash 131072 bhash 65536)
>Starting kswapd v 1.5 
>Detected PS/2 Mouse Port.
>Serial driver version 4.27 with no serial options enabled
>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>ttyS03 at 0x02e8 (irq = 3) is a 16550A
>pty: 256 Unix98 ptys configured
>Real Time Clock Driver v1.09
>RAM disk driver initialized:  16 RAM disks of 4096K size
>Uniform Multi-Platform E-IDE driver Revision: 6.30
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller on PCI bus 00 dev 78
>ALI15X3: chipset revision 194
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:DMA
>hd0: C/H/S=1024/16/255 from BIOS ignored
>hda: WDC WD400PB-00EPA0, ATA DISK drive
>hdd: CD-W540E, ATAPI CDROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: WDC WD400PB-00EPA0, 38166MB w/8192kB Cache, CHS=77545/16/63, UDMA(66)
>Floppy drive(s): fd0 is 1.44M, fd1 is 360K PC
>FDC 0 is a post-1991 82077
>ncr53c8xx: at PCI bus 0, device 11, function 0
>ncr53c8xx: 53c810 detected 
>ncr53c810-0: rev 0x2 on pci bus 0 device 11 function 0 irq 10
>ncr53c810-0: ID 7, Fast-10, Parity Checking
>scsi0 : ncr53c8xx-3.4.3-20010212
>scsi : 1 host.
>  Vendor: QUANTUM   Model: VP32210           Rev: 81H8
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
>scsi0 : channel 0 target 1 lun 8 request sense failed, performing reset.
>SCSI bus is being reset for host 0 channel 0.
>ncr53c8xx_reset: pid=10 reset_flags=1 serial_number=0 serial_number_at_timeout=0
>scsi0: device driver called scsi_done() for a synchronous reset.
>scsi : detected 1 SCSI disk total.
>ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
>scsi : aborting command due to timeout : pid 16, scsi0, channel 0, id 1, lun 0 Test Unit Ready 00 00 00 00 00 
>ncr53c8xx_abort: pid=16 serial_number=29 serial_number_at_timeout=29
>ncr53c810-0: abort ccb=c7e38000 (cancel)
>SCSI host 0 abort (pid 16) timed out - resetting
>SCSI bus is being reset for host 0 channel 0.
>ncr53c8xx_reset: pid=16 reset_flags=2 serial_number=29 serial_number_at_timeout=29
>ncr53c810-0-<1,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
>SCSI device sda: hdwr sector= 512 bytes. Sectors= 4308352 [2103 MB] [2.1 GB]
>Partition check:
> sda: sda1 sda2 < sda5 > sda3 sda4
> hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.13)
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing unused kernel memory: 76k freed
>Executing init=/sbin/init
>Adding Swap: 184736k swap-space (priority -1)
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 96M
>agpgart: Detected Ali M1541 chipset
>agpgart: AGP aperture is 64M @ 0xd0000000
>scsi1 : SCSI host adapter emulation for IDE ATAPI devices
>scsi : 2 hosts.
>  Vendor: TEAC      Model: CD-W540E          Rev: 1.0C
>  Type:   CD-ROM                             ANSI SCSI revision: 02
>Detected scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.11
>MSDOS FS: Using codepage 866
>MSDOS FS: IO charset koi8-r
>MSDOS FS: Using codepage 866
>MSDOS FS: IO charset koi8-r
>neighbour table overflow
>neighbour table overflow
>neighbour table overflow
>neighbour table overflow
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-ohci.c: USB OHCI at membase 0xc88ca000, IRQ 5
>usb.c: new USB bus registered, assigned bus number 1
>usb.c: USB new device connect, assigned device number 1
>hub.c: USB hub found
>hub.c: 2 ports detected

Actions: View

Attachments on bug 3854: 361 | 367 | 368 | 369 | 370 | 374 | 375 | 378 | 379 | 383 | 384 | 385 | 397 | 408 | 409 | 417 | 418 | 419 | 420 | 1469 | 1618 | 1633