Attachment 414 Details for Bug 4230 – dmesg

dmesg

dell_optiplex_gx200.dmesg (text/plain), 9.24 KB, created by Denis Ovsienko on 2004-05-25 14:59:10 MSD

(hide)

Description:

Filename:

MIME Type:

Creator: Denis Ovsienko

Created: 2004-05-25 14:59:10 MSD

Size: 9.24 KB

patch

obsolete

>Linux version 2.4.25-std-up-alt7 (builder@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-alt6)) #1 Sun Apr 25 23:46:12 MSD 2004
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007fae000 (usable)
> BIOS-e820: 0000000007fae000 - 0000000008000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>127MB LOWMEM available.
>On node 0 totalpages: 32686
>zone(0): 4096 pages.
>zone(1): 28590 pages.
>zone(2): 0 pages.
>DMI 2.3 present.
>106 structures occupying 3410 bytes.
>DMI table at 0x000F0450.
>BIOS Vendor: Dell Computer Corporation
>BIOS Version: A02
>BIOS Release: 07/28/2000
>System Vendor: Dell Computer Corporation
>Product Name: OptiPlex GX200               
>Version: 
>Serial Number: 67FZ201
>Board Vendor: Dell Computer Corporation
>Board Name: OptiPlex GX200               
>Board Version: 
>ACPI: RSDP (v000 DELL                                      ) @ 0x000fd790
>ACPI: RSDT (v001 DELL    GX200   0x00000008 ASL  0x00000061) @ 0x000fd7a4
>ACPI: FADT (v001 DELL    GX200   0x00000008 ASL  0x00000061) @ 0x000fd7cc
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000b) @ 0x00000000
>Kernel command line: root=/dev/hda3  vga=788 
>Local APIC disabled by BIOS -- reenabling.
>Found and enabled local APIC!
>Initializing CPU#0
>Detected 860.904 MHz processor.
>Console: colour dummy device 80x25
>Calibrating delay loop... 1717.04 BogoMIPS
>Memory: 126636k/130744k available (1229k kernel code, 3724k reserved, 508k data, 136k init, 0k highmem)
>Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
>Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
>Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
>Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU:     After generic, caps: 0383fbff 00000000 00000000 00000000
>CPU:             Common caps: 0383fbff 00000000 00000000 00000000
>CPU: Intel Pentium III (Coppermine) stepping 06
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>POSIX conformance testing by UNIFIX
>enabled ExtINT on CPU#0
>ESR value before enabling vector: 00000000
>ESR value after enabling vector: 00000000
>Using local APIC timer interrupts.
>calibrating APIC timer ...
>..... CPU clock speed is 860.9066 MHz.
>..... host bus clock speed is 132.4470 MHz.
>cpu: 0, clocks: 1324470, slice: 662235
>CPU0<T0:1324464,T1:662224,D:5,S:662235,C:1324470>
>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
>mtrr: detected mtrr type: Intel
>ACPI: Subsystem revision 20040326
>PCI: PCI BIOS revision 2.10 entry at 0xfc0ce, last bus=2
>PCI: Using configuration type 1
>ACPI: IRQ9 SCI: Level Trigger.
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: System [ACPI] (supports S0 S1 S4 S5)
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>Transparent bridge - Intel Corp. 82801AA PCI Bridge
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>PCI: Probing PCI hardware
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
>PCI: Using ACPI for IRQ routing
>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>Starting kswapd
>kinoded started
>VFS: Disk quotas vdquot_6.5.1
>vesafb: framebuffer at 0xe8000000, mapped to 0xc8805000, size 1875k
>vesafb: mode is 800x600x16, linelength=1600, pages=3
>vesafb: protected mode interface info at c000:c970
>vesafb: scrolling: redraw
>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 100x37
>fb0: VESA VGA frame buffer device
>pty: 256 Unix98 ptys configured
>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
>ttyS00 at 0x03f8 (irq = 4) is a 16550A
>ttyS01 at 0x02f8 (irq = 3) is a 16550A
>NET4: Frame Diverter 0.46
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH: IDE controller at PCI slot 00:1f.1
>ICH: chipset revision 2
>ICH: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>hda: SAMSUNG SP1213N, ATA DISK drive
>blk: queue c0303ac0, I/O limit 4095Mb (mask 0xffffffff)
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: attached ide-disk driver.
>hda: host protected area => 1
>hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=14596/255/63, UDMA(33)
>Partition check:
> hda: hda1 hda2 hda3 hda4
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 512 buckets, 4Kbytes
>TCP: Hash tables configured (established 8192 bind 16384)
>Linux IP multicast router 0.06 plus PIM-SM
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>VFS: Mounted root (ext2 filesystem) readonly.
>Freeing unused kernel memory: 136k freed
>Executing init=/sbin/init
>Adding Swap: 1020116k swap-space (priority 1)
>Real Time Clock Driver v1.10f
>Linux agpgart interface v0.99 (c) Jeff Hartmann
>agpgart: Maximum main memory to use for agp memory: 94M
>agpgart: Detected Intel i820 chipset
>agpgart: AGP aperture is 64M @ 0xf0000000
>usb.c: registered new driver usbdevfs
>usb.c: registered new driver hub
>usb-uhci.c: $Revision: 1.275 $ time 00:05:00 Apr 26 2004
>usb-uhci.c: High bandwidth mode enabled
>PCI: Setting latency timer of device 00:1f.2 to 64
>usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 11
>usb-uhci.c: Detected 2 ports
>usb.c: new USB bus registered, assigned bus number 1
>hub.c: USB hub found
>hub.c: 2 ports detected
>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
>ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
>  http://www.scyld.com/network/ne2k-pci.html
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>NET3 PLIP version 2.4-parport gniibe@mri.co.jp
>plip0: Parallel port at 0x378, using IRQ 7.
>divert: allocating divert_blk for plip0
>EMU10K1/Audigy soundcard not found or device busy
>EMU10K1/Audigy soundcard not found or device busy
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 0 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 1 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 2 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 3 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 4 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 5 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 6 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 7 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 8 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 9 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 10 changed to on
>Looking for splash picture.... found (800x600, 10445 bytes, v2).
>Splash status on console 11 changed to on
>0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-5336  Wed Jan 14 18:29:26 PST 2004
>Unable to handle kernel NULL pointer dereference at virtual address 00000080
> printing eip:
>c8c76a93
>*pde = 07cbb067
>*pte = 00000000
>Oops: 0000
>CPU:    0
>EIP:    0010:[<c8c76a93>]    Tainted: P 
>EFLAGS: 00013246
>eax: 00000000   ebx: c29f3400   ecx: c29f3400   edx: 00000001
>esi: 00000000   edi: c53a8000   ebp: c41a9e38   esp: c41a9e08
>ds: 0018   es: 0018   ss: 0018
>Process X (pid: 1172, stackpage=c41a9000)
>Stack: c53a8000 00000000 00000001 c29f3400 0000002b 00000000 c29f3400 00000002 
>       00000000 c7d3b400 c2db8000 00000000 c41a9e6c c8c76531 c29f3400 00000001 
>       0000000b 00000000 c53a8000 00000000 c4bf0800 c29f3400 c53a8000 c8caf564 
>Call Trace:    [<c8c76531>] [<c8caf564>] [<c8caf538>] [<c8caf156>] [<c8d8c944>]
>  [<c8be51e6>] [<c8d7fe60>] [<c8be5135>] [<c8da7a60>] [<c8d55220>] [<c8da7a60>]
>  [<c8da7a60>] [<c8d7fe60>] [<c8be6b6c>] [<c8da7a60>] [<c8d4b078>] [<c8da7a60>]
>  [<c0139688>] [<c0138643>] [<c013854b>] [<c01423cf>] [<c0138874>] [<c0108823>]
>
>Code: 8b 86 80 00 00 00 ff d0 83 c4 24 68 ac 00 00 00 56 8b 46 70 
>

Actions: View

Attachments on bug 4230: 412 | 413 | 414 | 415